Aim: To calculate the Concrete Mix Design for M35 grade concrete with fly ash Introduction:Concrete mix design defines as the art of selecting suitable ingredients of cocnrete and determining their relative proportions with the objective of prosucing concrete of certain minimum strength and durability as economically as…

Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding loads from the members…

Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings: Design and Draft a layout of a residential building with the following details: a. Plot Size: 60’x20’(18.3m x6m)  b. Orientation- Facing East    c. Develop the following: 1. Architectural…

1. Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating the title block you need to save it as a block with names: Custom1_titleblock and Custom2_titleblock, respectively.…

1.Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards. AIM: To create the layout of the kitchen and hatch them using proper AutoCAD commands. PROCEDURE:…

Introduction AutoCAD has two types of viewports: Model space viewport and layout space viewport. In large or complex drawings, displaying different views reduces the time needed to zoom or pan in a single view. this viewport can be configured from the view tab on the ribbon. There are different model space viewports…

1. Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing. AIM: To create 3D model and view of: Furniture element Isolated footing AASTHO type girder Drop column with panel A wall Commands used: Extrude. Offset. UCS. Box. Union. Subtract. Move. 3d orbit. Loft. Sweep. Cone. Region.…

1. Create a 3D Isometric View of the building with plan and elevation given. Aim: To create the 3D isometric view of a building with plan and elevation given: Procedure: Initially, open the AutoCAD and go to 3D modeling. Then set the units of the drawing as Engineering (feet and inches). Now set the limits: Now, in the…

CREATING A 3D-RENDERED MODEL FOR A RESIDENTIAL BUILDING IN AUTOCAD Aim: To create a 3-dimensional residential building model with a rendered view in AutoCAD. Introduction: Rendering is creating a raster image based on 3D objects in a scene. A renderer is used to calculate the appearance of the material attached…

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level Aim: To create the ceiling above the walls at the first floor level. Procedure: Initially open the week 3 assignment from the revit software. Then, first let…