`Calculate the Concrete Mix Design for M35 grade concrete with fly ash & M50 grade concrete without Fly ash                    MIX PROPORTIONING OF CONCRETE M35 GRADE WITH FLY ASH    1.STIPULATIONS FOR PROPORTIONS: Grade designation :M35 Type of cement: OPC…

Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding loads from the members…

Create the geometries from P1 to P2 using all the coordinates system methods. You need to use the Line tool to create the geometries. Where required you need to use the circle tool.Please read the drawings and find out the missing dimensions before working on the sketches.   P1 select line tool and specify the first…

  Aim: To draw C.S of load bearing wall showing foundation details. Introduction: In this Cross section we are having pcc bed, footing and load bearing wall. In this type footing is stepped footing. And sizes of footing and wall are as follows. procedure: 1.In this first we use line command using 0,0 as starting point.…

Aim: To draw the given figure by decimal units using autocad. Introduction: In the figure the units used are Decimal units. Procedure: 1.First in new drawing are setup in decimal units. 2.Using line command with the starting coordinates as 0,0 for the starting point. 3.Then for the next point use line command and coordinates…

1. Residence Plan: Sketch the layout of a residence as shown in the Figure 1. Consider all dimensions as reference to sketch the unit plan. Also the text in the layout are only for reference. Assume the missing dimensions. Also, refer the schedule for size of the doors. Aim: To sketch the layout of a residence plan. Procedure:…

1. Create a column schedule as shown in the figure. Note: Create a column schedule with the help of lines. Also, insert text with the help of Dtext command or Single Line text. Hint: Use font name: romans.shx; Height: 8”, Justify: Left A:  1.First open the autocad with imperical units tab. 2.The Enter Dtext…

1. Draw the elevation and details of a wardrobe as shown in the Figure below. After sketching, you need to provide the dimensions and text with the use of layers. Use proper text styles and dimension methods to document it. Also, assume dimensions, wherever needed. Note: All dimensions are in mm. ANS: 1.First open the…

  1. Create the Plan and Sections as shown in the Figures. Use proper dimension techniques and dimension styles to document the project. Assume the sizes of the doors and windows as per construction standards. Refer to sections for stair details if required. ANS: 1.Open the new drawing file in autocad. 2.Set…

Design and Draft a layout of a residential building with the following details: a. Plot Size: 60’x20’(18.3m x6m)  b. Orientation- Facing East    c. Develop the following: 1. Architectural Drawing (Floor Plan, Elevations, and Sections) 2. Structural Drawing (Column, Bean, Footing Plan) ANS:  …

1. Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating the title block you need to save it as a block with names: Custom1_titleblock and Custom2_titleblock, respectively.…

1.Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards. ANS: AIM: To Create the layouts of the Kitchen and provide hatches pattern as shown. Also,…

1. Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Use the MV command to create the viewport of the size as shown in Figure. Also, use ATTEDIT command to edit the information in the title block. Use A1 size for the layout.…

1. Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing. ANS: Aim: To Create a 3D furniture element given. Introduction:To create 3D elements we have use 3D modeling.3D modeling is used to create the elements in all 3 dimensions. Procedure: 1.To create the 3D elements first we have…

1. Create a 3D Isometric View of the building with plan and elevation given. ANS:   AIM: To Create a 3D Isometric View of the building with plan and elevation given. Introduction: In AutoCAD the 3D models are drawn with 3D modelling.The 3d model shows the x,y and z axis of the through this we can visualise the…

Create a 3 dimensional model of the residential building with a rendered view.   ANS: Aim: To Create a 3 dimensional model of the residential building with a rendered view. Introduction: In AutoCAD the 3D models are drawn with 3D modelling.The 3d model shows the x,y and z axis of the through this we can visualise…

1) From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately. Ans:  AIM:From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately. Introduction: The autodesk revit software…

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level ANS: 1. First we have to open the previous file from the revit. 2.Then from the first floor plan go to architecture tab and select ceiling. 3.Then select the…

1) Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School ANS: From the above options of the structure to be build i choose multi unit Residential Appartment.…

1) Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve. ANS:   Aim: To create a set of sinusoidal points, a curve and a surface out of the curve using dynamo. Procedure:  Initially, open the architecture template of Revit software and go to manage tab. In manage…

1) Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class. Ans: Aim: Using the Architecture/ Structure Project file developed and exporting the Revit architecture and structure…

Question 1: a) b)  c)  What is the mode of failure or damage of the beams in the figure above? Are the damages repairable? Elaborate  ANS: 1(a) Observations from image: 1.The Failure has happen at beam column joint. 2.The crack happened at the bottom of the beam. 3.The concrete crushed and the…

1. Differentiate Static analysis and Dynamic analysis with proper representing pictures. ANS:           STATIC ANALYSIS          DYNAMIC ANALYSIS 1. Load is not variable with time and neglected due to slow applying of load. 1. Load is variable with time due to fast…