AIM: #1.Make a Simulink model of Doorbell using solenoid block with the following details:        In the above arrangement, when the switch is closed the electromagnet receives electrical power from the battery and pulls the metal arm to hit the bell producing sound.  Create a situation…

AIM: #1.Implement control logic of a “washing machine” using Stateflow as per given sequence: THEORY-      A washing machine is a machine that washes dirty clothes. It contains a barrel. into which the clothes are placed. This barrel is filled with water, and then rotated very quickly…

#Aim: To perform the simulation of BAJA All-Terrain vehicle model and observe the vehicle speed and CVT shaft speed output graph by changing break and throttle inputs. Theory:             An all-terrain vehicle (ATV), also known as a quad (cycle), three-wheeler, four-track, four-wheeler, or…

Mini Project - Vehicle Direction Determination General Overview: Identifying the direction of the vehicle is one of the important & diverse features in Autonomous driving & Advanced Driver Assistance Features. This particular sub-feature of identifying the direction of vehicle is basically identifying the direction…

Main Project – Adaptive Cruise Control (ACC) AIM:- To develop the Adaptive Cruise Control feature as per the Requirement Document using MATLAB Simulink. To follow all the MBD related processes such as Requirement Tagging & Traceability, SLDD creation, Configuration Parameter changes, Model Advisorcheck &…

Project 1- Traffic Jam Assistant Feature Introduction to the Feature: Traffic Jam Assistant is one of the most common feature in Advanced Driver Assistance System. Traffic Jam Assistant helps the driver arrive more relaxed at their destination, even in dense traffic or in traffic jams. As a partially automated comfort…

 Project 2-Highway Assistant-Lane Changing Assistant Introduction to the Feature: The Highway Assistant supports the driver and takes over the longitudinal and lateral guidance of the vehicle in monotonous driving situations on highways. The partially automated function can automatically start, accelerate, brake as…

ADVISOR Tool Aim:- Using ADVISOR Tool Simulate Given Parameters.    Introduction:- The ADVISOR Tool means Advance Vehicle Simulator Tool. It is created by NREL [National Laboratory for Renewable Energy] in year betwwen 1994-2004. It gives rapid analysis of the performance and fuel economy of conventional…

1.What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type?  Answer:-Subsystem of Mapped and Dynamic Based models:- Mapped Based Model:-   The Mapped model is one of the type where the data points are Pre-assigned in lookup tables. In this engine…

1.  Which types of power converter circuits are employed in electric and hybrid electric vehicle?  Answer:- There are 4 main categories of power converter circuits which are used in electric and hybrid electric vehicles. They are listed and elaborated upon below: AC to DC converter:-        …

 1. A. Explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’.     B. Comment on the armature current shoot-up from the scope results.     C. Refer to the help section of ‘The Four-Quadrant Chopper DC Drive (DC7) block’. Compare it with the H-bridge…

1)For a defined driving cycle, calculate the energy required for braking. Answer:- 1) Drive cycle :-A driving cycle is a series of data points representing the speed of a vehicle versus time. Driving cycles are produced by different countries and organizations to assess the performance of vehicles in various ways,…

 Part A: 1.Search and list out the total weight of various types of aircrafts.  Answer:- Introduction:-             An aircraft is a vehicle or machine that is able to fly by gaining support from the air. It counters the force of gravity by using either static lift or by…