ASSEMBLY WORK BENCH                      …

AIM :         To create the Base Bracket Plastic component through the given Class-A surface.  OBJECTIVE : To make sure that the model meets the requirements of the draft angle. To create the Tooling axis using bisecting method. To perform Draft analysis on the given Class A Surface.…

SWITCH BEZEL DESIGN Aim: To  create the Switch Bezel Plastic component through the given Class-A surface. Objectives: To design switch bezel from given Class A surface Create a tooling axis,Class B and Class C. Converting closed surface into solid and perform draft analysis on the final component. Software used: Catia…

  Objective: The main objective of this challenge is to create a solid body of 'Bumper' with the help of the closed surface method by using the 'Generative shape design' workbench in CATIA V5. Performing the 'Draft Analysis' on the solid part body of the Bumper. Overview:Initially, we need to offset the given Bumper class…

 OBJECTIVE: Create Closed Body for given Door Handle Class A surface and also, Create the Rib & Screw Boss for the Door Handle considering the design rules.   STEPS FOLLOWED: Tooling Axis Creation. Draft Analysis of Class A surface.  Creating Class B surface and Class C surface.…

AIM  To Create the Dog House for the Door Trim considering the design rules through the given Class-A surface. THEORY Tooling Axis Tooling Axis is the direction in which the mold or core and cavity opens and closes. While designing a component first thing is to define the tooling axis.  Procedure Check the…

Door Trim Lower with Engineering Features design heat stakes and the locator's design considering the design rules.   AIM: Create the Door Trim Lower Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the draft angle requirements…

A-PILLAR DESIGN USING A MASTER SECTION AND DRAFT ANALYSIS  OBJECTIVE: To do Draft analysis and Design A-Pillar with the engineering features with the help of the master section, Class-A, Class-B, Class-C, and Tooling axis. TOOLING AXIS Firstly, we have to create a tooling axis which is essential for designing the…

                                                                                                                                DOOR TRIM PANEL   Intoduction: Design the door trim panel by the given class A surface and make draft analysis of it. By adding enginnering features to the various components by assembling the…

                                                                                                                           BENCHMARKING It is an organised comparison of similar goods, services, or methods along some performance variables. By benchmarking one can include the better options available in competitors and eliminate…

                                                                                           …

Hood design Aim: To Design Hood outer panel, inner panel and the necessary reinforcements by following the Master section with the design parameter Introduction: Hood is the main component of a car at the front portion. It is used to decorate the car and add a luxurious look. The shape of the Hood is made aerodynamic in…

Aim: To find the section modulus of the hood and optimization to improve the overall section modulus.   Objective: Use the section from your Hood design and calculate the section modulus using the formula S= I/y.   Section Modulus: The section modulus (S) is geometry property of the cross section used for designing…

Aim:- To Calculate the Wheel Arch gap at required points and checks whether the car passes the Eurepean standard. Fender:- A fender is a part of the automobile that is placed just above the tyres/wheels (both of the front and back). The purpose of the fender in an automobile is to prevent sand, mud, rocks, liquids, and…

                                                                                           …

ROOF DESIGN OBJECTIVE: 1.Main objective of the project is to create the Roof Sheetmetal design in NX cad, and also designing Front roof rail, rear roof rail, bow roof front, bow roof rear, center roof rail and Reinforcement are creating to build the strong roof. 2.Do curvature study on Roof and performance calculations…

BACK DOOR DESIGN   Aim: To design a Back door of a car from the given styling surface provided by using NX CAD. To develop a back door and its reinforcements, draft analysis for deep drawing satisfaction by sheet metal design. Back Door: The back door is one of the BIW components in an automotive car which gives access…