QUESTION - For a pressure valve, check the geometrical errors, perform Topology cleanup and mesh the model with three different target lengths each individually. Also, include the concepts you learned. Target length = 1mm, 3mm & 5mmElement type = Tria ANSWER -Aim - To set the target length & mesh the given…

QUESTION -For the given Turbocharger geometry, resolve all the geometrical errors, assign PIDs and perform surface mesh & volumetric mesh according to the given conditions. Write down a detailed report mentioning the entire process. Also, include the concepts you learned. Final Geometry File: https://drive.google.com/file/d/17RLvI5LIRcrQ3-h0U5N6fe_h62oQ0P4D/view?usp=sharingANSWER…

QUESTION -  For the given BMW Car geometry, resolve all the geometrical errors, assign PIDs and perform surface mesh according to the given conditions. Construct a Fluid domain and mesh it for an External flow analysis of the geometry. Write down a detailed report mentioning the entire process. Also, include the concepts…

QUESTION - Surface Wrap the automotive assembly by performing topo clean-up. Write down a detailed report mentioning the entire process. Also, include the concepts you learned. Target length for Wrap = 3 mmANSWER - Final Geometry File -  https://drive.google.com/file/d/14taH6kj9bw5JHtIhsfvuto0zKPCCEmXz/view?usp=sharingAim…

QUESTION -For the given geometry of the Tesla Cyber Truck, check and solve all geometrical errors and Assign appropriate PIDs. Perform meshing with the suitable Target length and element Quality criteria.Take target lengths for different components and quality criteria according to the system capacity.Create a thorough…

AIM - A steady-state simulation is to be carried out in a mixing tee, for two cases - short tee & long tee, to compare the mixing effectiveness when the hot inlet temperature is 36°C & the cold inlet is at 19°C. Case 1 -Short mixing tee model with a hot inlet velocity of 3m/s.Momentum ratio of 2, 4. Case…

AIM - A transient state simulation is to be performed to study the Rayleigh Taylor Instability phenomenon in Ansys Fluent. INTRODUCTION -The Rayleigh-Taylor instability occurs when the lighter fluid pushes the heavier fluid across an interface between two fluids of different densities. Water suspended over oil, for example,…

AIM - A transient state simulation is to be performed to study the Rayleigh Taylor Instability phenomenon in Ansys Fluent. INTRODUCTION -The Rayleigh-Taylor instability occurs when the lighter fluid pushes the heavier fluid across an interface between two fluids of different densities. Water suspended over oil, for example,…

AIM -A simulation for external flow analysis over an Ahmed body is to be carried out for the velocity of 25 m/sec with the default air properties in Ansys fluent. INTRODUCTION - It is asked to compute an external flow simulation over an Ahmed body using air, with a 25 m/sec velocity, as working fluid. The geometry…

AIM - A steady-state simulation is to be performed to study Conjugate Heat Transfer (CHT) Analysis on the Exhaust Port model in Ansys Fluent. INTRODUCTION & THEORY -   1) Conjugate Heat Transfer (CHT) can be defined as the heat transfer between solid and fluid domains by exchanging thermal energy at their interfaces.…

AIM - A steady-state simulation for Conjugate Heat Transfer (CHT) analysis of Graphics Card to be performed using Ansys Fluent. INTRODUCTION - Conjugate Heat Transfer (CHT) is the exchange of thermal energy at the interfaces of solid and fluid domains to transfer heat. That is, it includes both conduction and convection…

AIM -A simulation for external flow over a cylinder is to be performed using Ansys Fluent. INTRODUCTION & THEORY - Types of Flows - Laminar flow: If a Fluid travels smoothly in a regular path then it is called a Laminar flow. Turbulent Flow: If a Fluid flows in an irregular path instead of a regular…

AIM -A Steady-state simulation for analysis of the Cyclone Separator is to be performed in Ansys Fluent in order to calculate the separator efficiency and the pressure drop. INTRODUCTION -Cyclone Separators are machines that use the centrifugal force produced by a spinning fluid stream to separate the particles…

AIM -A steady-state simulation for the parametric study of flow through a gate valve is to be performed in Ansys Fluent.INTRODUCTION & THEORY - Gate Valve -The most common type of valve in water supply systems is a gate valve. It is a linear-motion isolation valve with the ability to stop or allow flow. The closure…

Problem Statement AIM - A simulation for heat transfer analysis for the cylindrical Lithium ion battery, with heat generation boundary condition, is to be performed using Ansys Fluent. INTRODUCTION -Electric vehicles charge their batteries with electricity rather than using fossil fuels such as gasoline or diesel. Electric…