1) Aim To make a simulink model of door bell using solenoid block and to create a situation where the switch is closed for 2 seconds and then released and observe the physical movement of plunger. Solenoid  is an electromagnet with a wire winding and a small metal piston inside it, when electric current flows through…

1) Aim To implement control logic of a washing machine using stateflow as per the sequence: If the power supply is available, the system gets activated If the water supply is not available, stop the process and indicate through LED Soaking time should be 200s followed by washing time of 100s Then rinsing happens for next…

Aim To study and analyze BAJA All Terrain Vehicle(ATV) model by carrying out a system level simulation of all terrain vehicle and differentiate between models. To download the model from the given link and understand the functions of various blocks and subsystems employed in the given model and to compare with the different…

Live Batch 9 Project 1 Aim : To Create a user defined data type to implement the user interfaces for working with ‘Set’ (Mathematical Set theory) using Linked List The union of two sets A and B is the set of all those elements which are either in A or in B, i.e. A ∪ B, whereas the intersection of two sets A and B is the…

Live Batch 9 Project 2 - Implement the Code for controlling the retraction and extension of Airplane’s landing gear Overview  An airplane has three gears for landing such as nose gear, left gear and right gear There is a hydraulic pump which is exerting pressure to the gears to bring it down or pull it up using…

1.Perform Static Code Review Analysis for “C:\**\LDRA_workarea\Examples\C_Testbed_examples\Testrain\Testrain.c” Generate Code review report and upload them. Procedure Perform static code analysis for testrian.c The file location for the file is  C:\**\LDRA_workarea\Examples\C_Testbed_examples\Testrain\Testrain.c”…

1.Write a Test plan to test features of a new mobile phone (Blackbox test) that needs to be implemented based on the following requirements (The product is still under development stage and is yet to be UA (User Acceptance ) tested Every other thing to be included in the test plan can be hypothetical Black Box Testing…

Project 1 Live batch 9 Aim: Implement a system on the simulator for controlling a DC motor using L293 motor driver, monitor its status and print the running status of motor on the LCD Display DC Motor A DC motor is any of a class of rotary electrical motors that converts direct current (DC) electrical energy into mechanical…

Project 2 Live batch 9 Aim: To implement the  code for “Measuring distance of an object using ultrasonic distance sensor (HC-SR04) Measure the distance travelled by the wave to the object and gets bounced back from the object to sensor Measure Pulse width using Input Capture Mode Ultrasonic distance sensor (HC-SR04)…

Aim To implement the Code for “Interfacing a 16*2 LCD with two Arduino’s (one for Master and one for Slave) using Inter-Integrated Circuit (I2C) communication protocol” by sending the message to LCD using I2C communication protocol and displaying the message on LCD screen First, connect an Arduino uno R3 with an LCD display…

Aim: To measure the distance of an object using an ultrasonic sensor and also smoothen the sensor data using a moving average  filter To Measure the distance traveled by the wave to the object and gets bounced back from the object to the sensor Smoothening the sensor data by moving average filter technique, the filter…

Mini Project on Vehicle Direction Detection Objective of Mini Project: Development of MATLAB Simulink model as per requirement. Tag the requirements to the simulink model; tagging requirement 1 & requirement 2 to their corresponding subsystems is fine. MBD compliant changes, Data Dictionary creation & code generation…

Aim: Develop an Adaptive cruise control feature as per the requirement document using MATLAB Simulink Requirement tagging& Traceability, SLDD creation, Configuration Parameter changes, Model Advisor check, and code generation are to be followed Enable 'Support Floating Numbers' under code generation settings in Configuration…