Aim: Steady state of simulation of T joint mixing of hot and cold fluid. Introduction: In this project we have successfully simulated “Tee joint mixing of hot and cold fluid of steady state” To be more specific study of flow and mixture of fluid of different temperature and we observe changes in its  parameters…

Aim: Steady state of simulation of T joint mixing of hot and cold fluid. Introduction: In this project we have successfully simulated “Tee joint mixing of hot and cold fluid of steady state” To be more specific study of flow and mixture of fluid of different temperature and we observe changes in its  parameters…

Aim :-Steady and transient flow simulation of flow over cylinder, explain the phenomenon of vertex street           Geometry preperation                       In this project simulation is done on the two dimensional geometry which is constructed…

AIM= Analysis flow and Turbulence Structures in the Wake of a Simplified Car Model (Ahmed Model) The aim of the present study is to investigate experimentally the aerodynamic behaviour of the Ahmed body under various  geometrical conditions and to test the ability of the CFD simulation   OBJECTIVE = analysis…

Aim = CHT Analysis on Exhaust port Introductions (Theory of topic) Where CHT analysis is used conjugate heat transfer (CHT) analysis can accurately predict heat transfer by simultaneous solving all the relevant solid and flow field heat transfer processes, for example: conduction through solids, free and forced convection…

AIM = Rayleigh Taylor Instability   Introduction=he Rayleigh-Taylor instability, or RT instability (after Lord Rayleigh and G I. Taylor), is an instability of an interface between two fluids of different densities which occurs when the lighter fluid is pushing the heavier fluid Examples include the behavior of…

Aim:- To perform analysis on cyclone separator and calculate the separation efficiency and pressure drop.   Introduction:- Cyclones are devices that employ a centrifugal force generated by a spinning gas stream to separate particles from the carrier gas. Their simple design, low maintenance costs, and adaptability…

Aim :- Parametric study on Gate valve. Introduction , theory   A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate…

Aim Part 1: To Perform a combustion simulation on the combustor model and plot the variation of the mass fraction of the different species. Part 2:To add the water content in the fuel from 5% to 30% by mole and observe the effect of it on the results. Introduction Combustion is a chemical process in which a substance reacts…

CHT Analysis on a Graphics card Aim  Perform a steady-state conjugate heat transfer analysis on a model of a graphics card. You can use appropriate materials of your choice for the simulation. Conjugate heat transfer analysis on a graphics card   Problem statement: Perform a steady-state conjugate heat transfer…