GATE Electronics (EC): Electromagnetics (Maxwell's equations, plane waves and polarisation, transmission lines and Smith chart, waveguides and antennas), previous-year questions solved, part 4

Part 4 of 4 of the Electromagnetics hub: 2 more official GATE EC questions on waveguides, antennas and link budgets, each solved step by step and checked against the official answer key. Part 1 covers electrostatics, currents and Maxwell's equations, plane waves and polarisation and transmission lines, Smith chart and S-parameters.

Questions from official GATE EC papers (IIT Kharagpur 2022, IIT Kanpur 2023, IISc Bengaluru 2024, IIT Roorkee 2025, IIT Guwahati 2026); solutions by Skill-Lync. · Updated 17 Nov 2026 · 2 of 22 questions on this page

GATE 2026 · EC · Q.21MCQ · 1 markWaveguides, antennas and link budgets

Friis equation with GT = GR = 1.0, lambda = 0.30 m, PT = +10 dBm: distance for PR = -90 dBm

Consider the Friis' transmission equation , where and are the received and the transmitted powers, respectively. and are the gain of transmitting and receiving antennas, respectively, is the distance between the transmitting and receiving antennas, and is the wavelength in free space.
Given: , m and dBm.
Choose the distance (), in km, from the following options at which the received power, dBm?
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (B) Official key: B

  1. Convert both powers from dBm to a plain ratio. dBm and dBm .
  2. Their ratio is , which is of path loss.
  3. With , Friis gives . Take the square root of the ratio: .
  4. .
  5. , so , option (B).

Trap: option (D), km, is what you get if the loss is taken as dB instead of dB: the difference of two dBm values must be taken as transmitted minus received. Dropping the square on gives km, which matches no option. The code substituted every option into the printed formula and kept only (B) (received power within dB of dBm), found km, redid it in the dB form dB, checked that every extra dB of loss multiplies by , and confirmed that the dB slip lands on option (D).

Where this shows up in industry

This is the first line of every radio link budget: transmitted power plus antenna gains minus free-space loss gives received power, and the free-space loss of 20 log10(4 pi D / lambda) grows by 20 dB for every tenfold increase in distance. Engineers use it to check whether a Wi-Fi, LoRa or satellite link has enough margin above the receiver sensitivity.

GATE 2026 · EC · Q.33NAT · 1 markWaveguides, antennas and link budgets

Cutoff frequency (GHz) of the dominant TE10 mode of an air-filled waveguide 0.28 inch x 0.14 inch

The cutoff frequency (in GHz) for the dominant mode of an air-filled rectangular waveguide of inner dimension inch inch is ______. (rounded off to two decimal places).

Answer: Official key: 20.50 to 21.50

  1. For a rectangular guide of width (long side) and height , the cutoff of the mode is . For this is .
  2. Convert to metres: . The height does not enter .
  3. .
  4. (with m/s it is GHz, so the answer is GHz either way). The key accepts to GHz.

Trap: leaving out the factor () gives GHz, and using the short side () gives GHz, which is the cutoff. Reading the inches as millimetres gives GHz. All three are outside the key range. The code enumerated every mode up to in each index: the first mode is at GHz and the next ( and ) is at GHz, so is dominant. An independent finite-difference solve of the Neumann eigenvalue problem on the inch rectangle gave GHz.

Where this shows up in industry

This is the standard WR-28 waveguide used for 26.5 to 40 GHz (Ka-band) work: its cutoff for the dominant mode is about 21.1 GHz, and the recommended band starts about 25 percent above cutoff to keep loss and dispersion low. Waveguide components for radar and 5G mmWave links are chosen by checking that the operating band lies between the TE10 cutoff and the cutoff of the next mode.

From GATE prep to a hardware design career

Talk to a counsellor.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.