GATE Electronics (EC): Electromagnetics (Maxwell's equations, plane waves and polarisation, transmission lines and Smith chart, waveguides and antennas), previous-year questions solved, part 2

Part 2 of 4 of the Electromagnetics hub: 5 more official GATE EC questions on plane waves and polarisation, each solved step by step and checked against the official answer key. Part 1 covers electrostatics, currents and Maxwell's equations, transmission lines, Smith chart and S-parameters and waveguides, antennas and link budgets.

Questions from official GATE EC papers (IIT Kharagpur 2022, IIT Kanpur 2023, IISc Bengaluru 2024, IIT Roorkee 2025, IIT Guwahati 2026); solutions by Skill-Lync. · Updated 17 Nov 2026 · 5 of 22 questions on this page

GATE 2023 · EC · Q.20MCQ · 1 markPlane waves and polarisation

Narrow band signal in a lossless dielectric (eps_r = 4, mu_r = 1): phase and group velocity compared with c

Consider a narrow band signal, propagating in a lossless dielectric medium , with phase velocity and group velocity . Which of the following statement is true? ( is the velocity of light in vacuum.)
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (D) Official key: D

  1. In a lossless medium with constant and the plane-wave dispersion relation is .
  2. Phase velocity: .
  3. Group velocity: . The relation is a straight line through the origin, so the medium is non-dispersive and .
  4. Both speeds equal : , option (D).

Trap: option (C), with , is the pattern of a waveguide, where and . It does not apply to a plain dielectric. The code took the dispersion relation, differentiated it numerically (, ), propagated a narrowband Gaussian packet with an FFT (envelope speed , carrier speed ), and for a waveguide at with a cutoff found and , which is the (C) pattern.

Where this shows up in industry

In coax with a solid dielectric of relative permittivity , a signal travels at . That is the cable's velocity factor (about for solid polyethylene, ), and it sets the physical length of delay lines and quarter-wave stubs. Because the dielectric is non-dispersive, the pulse envelope and the carrier move together.

GATE 2023 · EC · Q.53MSQ · 2 marksPlane waves and polarisation

Which (C1x, C1y, theta) make ax C1x cos(wt - bz) + ay C1y cos(wt - bz + theta) left handed elliptical?

The electric field of a plane electromagnetic wave is
.
Which of the following combination(s) will give rise to a left handed elliptically polarized (LHEP) wave?
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (A) and (B) and (D) Official key: A,B,D

  1. The wave travels towards . Look at the plane : and . So leads by .
  2. The sense of rotation is the sign of . With the thumb of the right hand along , a positive value turns the field like the fingers (right-handed); a negative value turns it the other way (left-handed).
  3. So the wave is left-handed when () and right-handed when ().
  4. It is elliptical (not linear, not circular) unless or (linear) or with (circular). None of the four options is linear or circular.
  5. (A) : , left. (B) with : left, elliptical. (C) : , right. (D) : , left. Answer: (A), (B) and (D).

Trap: (C) has the right amplitudes and a quarter-cycle offset, but is the same as : lags, so the wave is right-handed. Also (A) is not circular even though : it needs . The code sampled points of the field over one period at , took the sign of the sum of (left for A, B, D and right for C, confirmed with a second finite-step cross product) and measured the axial ratio: (A), (B), (C), (D), all between and infinity, so all elliptical.

Where this shows up in industry

Satellite and GPS signals are circularly polarised on purpose, right-handed for GPS, so the link does not depend on how the receiving antenna is rotated. Any real circular antenna is slightly elliptical, and its axial ratio, in dB, is a figure on the data sheet.

GATE 2023 · EC · Q.60NAT · 2 marksPlane waves and polarisation

Minimum thickness of an anti-reflection coating on glass (eps_r = 4) for red light of 0.75 um

A transparent dielectric coating is applied to glass to eliminate the reflection of red light . The minimum thickness of the dielectric coating, in , that can be used is _________ (rounded off to two decimal places).

Answer: Official key: 0.12 to 0.14

  1. Refractive indices at normal incidence: air , glass .
  2. For zero reflection the two reflected waves (from the air-coating and the coating-glass surfaces) must have equal size and opposite phase. Equal size needs the coating to be the geometric mean: , that is ( for the coating).
  3. Both surfaces go from a lower to a higher index, so both reflections carry the same sign at the surface. The second wave travels twice through the coating, so it needs an extra half cycle: , which gives for the smallest thickness.
  4. . The wavelength inside the coating is , and is a quarter of it.

Trap: using the glass index in the quarter-wave formula gives (), and using the vacuum wavelength gives (). Both fall outside the accepted range. The code ran a thin-film transfer-matrix computation at normal incidence: scanning the coating index from to and the thickness from to , the lowest reflectance was at ; at the reflectance vanishes first at . Uncoated glass reflects ; with the thickness or the reflectance would be or .

Where this shows up in industry

Quarter-wave anti-reflection coatings are on camera lenses, spectacle lenses and solar cells. Real coatings seldom hit the ideal index of : magnesium fluoride on glass () is a common compromise, and layers of several thicknesses widen the band, since one quarter-wave layer is exact for only one wavelength.

GATE 2024 · EC · Q.39MCQ · 2 marksPlane waves and polarisation

Plane wave E = Ay ay e^(-j2*pi*x/3) V/m in air hits a perfect conductor at x = 0: first null of total H

A uniform plane wave with electric field is travelling in the air (relative permittivity, and relative permeability, ) in the direction ( is a positive constant, is the unit vector along the axis). It is incident normally on an ideal electric conductor (conductivity, ) at . The position of the first null of the total magnetic field in the air (measured from , in metres) is _______.
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (A) Official key: A

  1. The phase constant is , so the wavelength is (frequency ). The air is the region .
  2. Inside a perfect conductor the field is zero, and the tangential is continuous, so the total at must vanish. With a reflected wave : , so .
  3. Total electric field: .
  4. The magnetic field of a plane wave is . For the incident wave and , so .
  5. The reflected wave travels along : , and its amplitude is , so .
  6. Total: .
  7. Nulls: , so for the first one in the air, , option (A).

Trap: options (B), (C) and (D) are positions where the electric field is zero. is zero at , where is at its maximum. Electric and magnetic nulls are apart. The code solved from the boundary condition in sympy (), got of each wave from Faraday's law , and searched to m on points: the first null of is at m (next ones and m), and the nulls of are at , , and m. At the option positions divided by its peak is for (A), and , , for (B), (C), (D), which are maxima. Only (A) is a null of .

Where this shows up in industry

This standing-wave pattern is why a Salisbury screen radar absorber puts a thin resistive sheet a quarter wavelength in front of a metal plate: the electric field is zero at the metal and largest a quarter wave out, where the sheet can absorb it. The same spacing sets how far a reflector or ground plane sits behind a dipole or patch antenna.

GATE 2026 · EC · Q.24MCQ · 1 markPlane waves and polarisation

Polarization of E = E0[x cos(wt - kz) + y sin(wt - kz)] for a plane wave in a lossless isotropic medium

The electric field of a monochromatic plane wave travelling in a lossless isotropic and homogenous medium is given by

in a right-handed orthogonal co-ordinate system.
Which of the following is the correct polarization of the electromagnetic wave?
  1. (A)Right-handed circularly polarized
  2. (B)Left-handed circularly polarized
  3. (C)Linearly polarized
  4. (D)Linearly polarized with angle to

Answer: (A) Official key: A

  1. Direction of travel: the phase is . A point of constant phase has , so it moves towards . The wave travels along .
  2. Shape of the path: the two components have the same amplitude and are apart in time ( and ). So at every instant: the tip of traces a circle. That rules out (C) and (D).
  3. Sense of rotation: put . Then . At the field points along , a little later along : it turns from towards , which is anticlockwise about .
  4. Handedness (IEEE convention): point the right thumb along the direction of travel (). The fingers curl from to , the same way rotates. So the wave is right-handed circularly polarized, option (A).

Trap: option (B) comes from using the optics convention (looking at the oncoming wave, anticlockwise is called left-handed), or from reading the wave as travelling towards . GATE follows the IEEE convention, and the key is (A). The code sampled at over one period ( points): the magnitude never changed, the axial ratio was , and was positive at every step, which means rotation from to for a wave. The same field with replaced by (a wave towards ) came out left-handed.

Where this shows up in industry

GPS, satellite TV and many satellite links use circular polarisation because the received signal does not depend on how the antenna is rotated about its axis, and a reflection reverses the handedness, which helps reject multipath. Antenna datasheets quote the sense (RHCP or LHCP) and the axial ratio, which is 0 dB for a perfect circle.

From GATE prep to a hardware design career

Talk to a counsellor.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.