GATE EC General Aptitude: quantitative questions solved (official ECE papers 2022-2026)

General Aptitude is the first 10 questions of every GATE paper and 15 of its 100 marks. The five official GATE EC papers from 2022 to 2026 set 21 quantitative GA questions, worth 32 marks: ratios, ages, logarithms, prime factors, musical-note frequencies, pooled covid tests, a medal table, a BMI chart, a fee with 18% GST and areas. Each is solved, its trap option explained, and its answer recomputed by a script against the official key.

Questions from the General Aptitude section of official GATE EC papers (IIT Kharagpur 2022, IIT Kanpur 2023, IISc Bengaluru 2024, IIT Roorkee 2025, IIT Guwahati 2026); figures redrawn and solutions by Skill-Lync. · Updated 18 Nov 2026 · 21 questions

GATE 2022 · EC · Q.7MCQ · 2 marksNumbers, powers and algebra

Which expression satisfies both 2x - 1 > 7 and 2x - 9 < 1?

Consider the following inequalities.
(i)
(ii)

Which one of the following expressions below satisfies the above two inequalities?
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (C) Official key: C

  1. From (i): , so .
  2. From (ii): , so .
  3. Both together: : option (C).

Trap: (D) looks like the edge of (ii), but at we get , which is not less than 1. (A) and (B) fail (i), since they sit at or below 4.

The code tested 241 exact fractions in steps of 1/8 from -10 to 20 against both inequalities. The solutions run from 33/8 to 39/8, and every point of (C) passes while each other option contains a failing point.

Where this shows up in industry

Bounding a quantity from two sides, such as a bias voltage that must exceed a threshold yet stay below a breakdown limit, is exactly this pair of inequalities.

GATE 2023 · EC · Q.3MCQ · 1 markNumbers, powers and algebra

Smallest number with distinct digits whose digits add up to 45

What is the smallest number with distinct digits whose digits add up to 45?
  1. (A)123555789
  2. (B)123457869
  3. (C)123456789
  4. (D)99999

Answer: (C) 123456789 Official key: C

  1. Distinct digits come from 0 to 9, and all ten add to 45. Dropping 0 changes nothing, so 1 to 9 also add to 45.
  2. Dropping any non-zero digit loses sum, so the only ways are digits 1 to 9 (nine digits) or 0 to 9 (ten digits).
  3. Fewer digits means a smaller number, so use 1 to 9 in ascending order: 123456789.

Trap: (B) 123457869 also has distinct digits adding to 45, but it is larger than (C). (A) and (D) repeat digits.

The code tried every subset of digits summing to 45 and built each one's smallest number; the minimum is 123456789, which is (C).

Where this shows up in industry

Choosing the smallest valid code under constraints is the same as picking a minimal-width encoding or test pattern that still covers every required case.

GATE 2024 · EC · Q.3MCQ · 1 markNumbers, powers and algebra

Find the father's age when Aman was born, from two age ratios five years apart

Five years ago, the ratio of Aman’s age to his father’s age was 1:4, and five years from now, the ratio will be 2:5. What was his father’s age when Aman was born?
  1. (A)28 years
  2. (B)30 years
  3. (C)35 years
  4. (D)32 years

Answer: (B) 30 years Official key: B

  1. Let Aman be and his father now. Five years ago: , so .
  2. Five years from now: , so .
  3. Substitute: , so , and .
  4. The father was years old when Aman was born.

Trap: answering the father's age now (45), which is the first thing you find. The question asks for his age at Aman's birth, which is the age gap, 30 years.

The code searched every integer pair of ages from 1 to 120 and found exactly one: Aman 15, father 45; the gap 30 matches only (B).

Where this shows up in industry

Setting up two equations from two ratio snapshots is the same move as solving for gain and offset from two calibration points on an ADC.

GATE 2024 · EC · Q.4MCQ · 1 markNumbers, powers and algebra

Find x greater than 1 when 1/log_2 x + 1/log_3 x + 1/log_4 x equals 1

For a real number ,

The value of is
  1. (A)4
  2. (B)12
  3. (C)24
  4. (D)36

Answer: (C) 24 Official key: C

  1. Flip each logarithm: .
  2. The equation becomes .
  3. Add logs of a product: .
  4. So .

Trap: adding the bases (2 + 3 + 4 = 9) instead of multiplying them. Logs of one base add when the arguments multiply, so the product 24 is what matters; (B) 12 is what you get by dropping the factor 2.

The code substituted each option into the left side: it gives 2.2925, 1.2789, 1.0, 0.8869 for 4, 12, 24, 36; only 24 gives 1.

Where this shows up in industry

Logarithms of a common base turn products into sums, which is why gains in dB and cascaded stage gains are added instead of multiplied.

GATE 2024 · EC · Q.5MCQ · 1 markNumbers, powers and algebra

Find the greatest prime factor of 3^199 minus 3^196

The greatest prime factor of is
  1. (A)13
  2. (B)17
  3. (C)3
  4. (D)11

Answer: (A) 13 Official key: A

  1. Take out the common power: .
  2. .
  3. So the number is , and its prime factors are 2, 3 and 13.
  4. The greatest is 13.

Trap: (B) 17 and (D) 11 are tempting because they look like plausible prime factors of a huge number; neither divides it. And (C) 3 is the most visible prime but not the largest.

The code factorised the exact 95-digit integer: its prime factors are [2, 3, 13] and nothing is left over, so the greatest is 13, option (A).

Where this shows up in industry

Factoring a power difference by pulling out the common term is the same step used to simplify polynomial filter expressions and to check a sequence length for FFT sizes.

GATE 2025 · EC · Q.3MCQ · 1 markNumbers, powers and algebra

Twelve musical notes, each 12th root of 2 times the one before: frequency ratio of F-sharp to C

The 12 musical notes are given as , and . Frequency of each note is times the frequency of the previous note. If the frequency of the note C is 130.8 Hz, then the ratio of frequencies of notes and is:
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (B) Official key: B

  1. Count the steps from C up to F#: C→C#→D→D#→E→F→F# is 6 steps.
  2. Each step multiplies the frequency by , so the ratio is .
  3. The 130.8 Hz value is not needed for a ratio. It only gives F# Hz.

Trap: (A) comes from counting only 2 steps, or from mixing up 6 and 12 in the exponent.

The code counted 6 semitones in the note list and compared the exponent 1/2 with each option's exponent; only (B) matches.

Where this shows up in industry

Frequency dividers, PLL channel steps and DDS tuning words all work on ratios like this: a fixed multiplier per step, so n steps give the multiplier raised to the power n.

GATE 2026 · EC · Q.4MCQ · 1 markNumbers, powers and algebra

Product of logarithms to bases p^(1/n) and y^(1/n) equals 16: find n

Real numbers , , and (all greater than 1) satisfywhere the logarithms are taken to the bases and .
The value of is ________.
  1. (A)2
  2. (B)4
  3. (C)8
  4. (D)16

Answer: (B) 4 Official key: B

  1. Change base: .
  2. In the same way .
  3. The product is , because and are reciprocals.
  4. So , and gives : option (B).

Trap: (D) 16, which is the value of , not of . The code evaluated the product for 30 pairs of and and found it equals every time (for example 4, 16, 64, 256 for ); only gives 16.

Where this shows up in industry

Logarithm base changes are routine in decibel and bit calculations, such as converting between , and natural logs when sizing gain or information rate.

GATE 2026 · EC · Q.8MCQ · 2 marksNumbers, powers and algebra

Sum of the perimeters of squares with side 1, 2, up to 10

Let represent the perimeter of a square with sides of length . The value of the expression is ________.
  1. (A)55
  2. (B)110
  3. (C)220
  4. (D)440

Answer: (C) 220 Official key: C

  1. A square of side has perimeter .
  2. The sum is .
  3. .
  4. So the total is : option (C).

Trap: (A) 55, which is the sum of the side lengths and forgets the factor 4. (D) 440 doubles the sum by using . The code added for to and got 220.

Where this shows up in industry

Totals over a regular series show up when you add up the edge lengths of a layout or the total trace length in a ladder of identical stages.

GATE 2022 · EC · Q.2MCQ · 1 markSpeed, percentages and money

Money shared among P, Q, R, S as 5 : 2 : 4 : 3, R gets 1000 more than S: share of Q?

A sum of money is to be distributed among P, Q, R, and S in the proportion 5 : 2 : 4 : 3, respectively.

If R gets ₹ 1000 more than S, what is the share of Q (in ₹)?
  1. (A)500
  2. (B)1000
  3. (C)1500
  4. (D)2000

Answer: (D) 2000 Official key: D

  1. Write the shares as for P, Q, R, S.
  2. R minus S is , and this is given as 1000, so .
  3. Q gets rupees: option (D).

Trap: (B) 1000 is the value of one part, the difference R minus S, not Q's share. (A) 500 halves it by mistake.

The code searched for the unit that makes R minus S equal 1000 and found 1000; the whole sum is then 14000 rupees, and only (D) matches Q = 2000.

Where this shows up in industry

Splitting a power or error budget in a fixed ratio across stages, then fixing one stage's value to find the rest, is the same one-unit step.

GATE 2025 · EC · Q.10MCQ · 2 marksSpeed, percentages and money

Maximum consulting fee when overhead is tiered and 18% GST applies on a Rs 10,00,000 limit

An organization allows its employees to work independently on consultancy projects but charges an overhead on the consulting fee. The overhead is 20% of the consulting fee, if the fee is up to ₹ 5,00,000. For higher fees, the overhead is ₹ 1,00,000 plus 10% of the amount by which the fee exceeds ₹ 5,00,000. The government charges a Goods and Services Tax of 18% on the total amount (the consulting fee plus the overhead). An employee of the organization charges this entire amount, i.e., the consulting fee, overhead, and tax, to the client. If the client cannot pay more than ₹ 10,00,000, what is the maximum consulting fee that the employee can charge?
  1. (A)₹ 7,01,438
  2. (B)₹ 7,24,961
  3. (C)₹ 7,51,232
  4. (D)₹ 7,75,784

Answer: (B) ₹ 7,24,961 Official key: B

  1. At a fee of 5,00,000 the overhead is 1,00,000 and the bill is , below 10,00,000. So the answer is in the higher slab.
  2. For fee : overhead .
  3. Total bill: , so .
  4. The largest whole-rupee fee is 724,961, option (B).

Trap: (D) 775,784 comes from forgetting that the overhead has a flat part plus 10%, or applying 20% on the whole fee: it gives a bill of 1,065,968, above the limit. (A) is allowed but is not the maximum.

The code searched every whole-rupee fee up to 10,00,000 and found the largest one with a bill of at most 10,00,000 is 724,961; only (B) equals it, (C) and (D) overshoot.

Where this shows up in industry

Budget-limit problems like this are the same as sizing a design against a fixed cap with fixed and proportional overheads: fix the total, then work backwards to what you can spend.

GATE 2023 · EC · Q.9MCQ · 2 marksProbability, tables and charts

Maximum testing kits needed to find 100 positives among 1000 using pools of 5

Out of 1000 individuals in a town, 100 unidentified individuals are covid positive. Due to lack of adequate covid-testing kits, the health authorities of the town devised a strategy to identify these covid-positive individuals. The strategy is to:
  1. Collect saliva samples from all 1000 individuals and randomly group them into sets of 5.
  2. Mix the samples within each set and test the mixed sample for covid.
  3. If the test done in (ii) gives a negative result, then declare all the 5 individuals to be covid negative.
  4. If the test done in (ii) gives a positive result, then all the 5 individuals are separately tested for covid.
Given this strategy, no more than ________ testing kits will be required to identify all the 100 covid positive individuals irrespective of how they are grouped.
  1. (A)700
  2. (B)600
  3. (C)800
  4. (D)1000

Answer: (A) 700 Official key: A

  1. 1000 people in sets of 5 gives 200 sets, so 200 pooled tests.
  2. Each positive set costs 5 extra tests. The worst case spreads the 100 positives over 100 different sets.
  3. Kits needed: . Any other grouping needs fewer.

Trap: (B) 600 is not enough in the worst case. (C) 800 and (D) 1000 are also upper bounds, but the question asks for the tightest figure that always holds, which is 700.

The code tried every count of positive sets from 20 to 100 and took the maximum of : 700, so (A).

Where this shows up in industry

Pooled testing is the same trade as batching in hardware screening: test a group first, split only on a fail, and size the worst case to know your capacity.

GATE 2024 · EC · Q.8MCQ · 2 marksProbability, tables and charts

Using the 2003 and 2023 BMI bar chart, pick the INCORRECT statement

The bar chart shows the data for the percentage of population falling into different categories based on Body Mass Index (BMI) in 2003 and 2023.
Based on the data provided, which one of the following options is INCORRECT?
Horizontal bar chart of the percentage of population by BMI category in 2003 and 20230%5%10%15%20%25%30%35%40%45%50%55%Percentage of populationObese25%15%Overweight40%25%Normal30%50%Underweight5%10%20232003
  1. (A)The ratio of the percentage of population falling into overweight category to the percentage of population falling into normal category has increased in 20 years.
  2. (B)The ratio of the percentage of population falling into underweight category to the percentage of population falling into normal category has decreased in 20 years.
  3. (C)The ratio of the percentage of population falling into obese category to the percentage of population falling into normal category has decreased in 20 years.
  4. (D)The percentage of population falling into normal category has decreased in 20 years.

Answer: (C) Official key: C

  1. Read the bars (2003 / 2023): obese 15 / 25, overweight 25 / 40, normal 50 / 30, underweight 10 / 5.
  2. (A) overweight : normal goes from 1/2 (25/50) to 4/3 (40/30): increased, correct statement.
  3. (B) underweight : normal goes from 1/5 (10/50) to 1/6 (5/30): decreased, correct statement.
  4. (D) normal falls from 50% to 30%: correct statement.
  5. (C) obese : normal goes from 3/10 (15/50) to 5/6 (25/30): it increased, so saying it decreased is the incorrect statement.

Trap: the question asks for the INCORRECT option, so the answer is the false statement, not a true one. Also, the obese bar alone grows by 10 points; the ratio grows even more because the normal bar shrinks.

The code recomputed all four statements from the bar values with exact fractions; (A), (B), (D) are true and only (C) is false.

Where this shows up in industry

Comparing ratios across two time points, not just raw bars, is how you read a yield or error-rate trend when the total volume changes between two production runs.

GATE 2025 · EC · Q.9MCQ · 2 marksProbability, tables and charts

Medal table of five nations: which statement based on the table is INCORRECT?

The table lists the top 5 nations according to the number of gold medals won in a tournament; also included are the number of silver and bronze medals won by them. Based only on the data provided in the table, which one of the following statements is INCORRECT?
NationGoldSilverBronze
USA404441
Canada392724
Japan201213
Australia171916
France162622
  1. (A)France will occupy the third place if the list were made on the basis of the total number of medals won.
  2. (B)The order of the top two nations will not change even if the list is made on the basis of the total number of medals won.
  3. (C)USA and Canada together have less than 50% of the medals awarded to the nations in the above table.
  4. (D)Canada has won twice as many total medals as Japan.

Answer: (C) Official key: C

  1. Add each row: USA 125, Canada 90, Japan 45, Australia 52, France 64.
  2. Order by total: USA, Canada, France, Australia, Japan. France is third, so (A) is true, and USA and Canada stay first and second, so (B) is true.
  3. Canada 90 is twice Japan 45, so (D) is true.
  4. All medals: 376, and half is 188. USA plus Canada have 215, which is more than half, so (C) is false.

Trap: (C) is easy to accept without adding, because only two of the five nations are mentioned. The question asks for the INCORRECT statement, not the correct one.

The code summed every row, re-ranked the nations and evaluated all four statements; only (C) is false.

Where this shows up in industry

Reading a table of measured results, such as bit-error rate per channel, and checking a claim against the totals is routine in test and yield reviews.

GATE 2022 · EC · Q.3MCQ · 1 markGraphs and geometry

Trapezium PQRS with PQ = 11, QR = 4, RS = 6, SP = 3 cm: shortest distance between PQ and SR?

A trapezium has vertices marked as P, Q, R and S (in that order anticlockwise). The side PQ is parallel to side SR.

Further, it is given that, PQ = 11 cm, QR = 4 cm, RS = 6 cm and SP = 3 cm.

What is the shortest distance between PQ and SR (in cm)?
  1. (A)1.80
  2. (B)2.40
  3. (C)4.20
  4. (D)5.76

Answer: (B) 2.40 Official key: B

  1. The parallel sides are 11 and 6, so the difference of 5 cm is shared by the two slanted sides. Slide the side SP across to make a triangle with sides .
  2. That is a right triangle () with the right angle between the 3 cm and 4 cm sides.
  3. The distance between the parallel sides is the height of this triangle on the hypotenuse: cm: option (B).

Trap: (A) 1.80 is the horizontal offset of S from P (), not the height. Reading the right-angle triangle's short leg or the offset instead of the height is the usual slip.

The code placed P at the origin, solved the two distance equations exactly (S at x = 9/5, height 2.40) and tested each option as a possible height; only (B) works.

Where this shows up in industry

Resolving a slanted dimension into a right-triangle height is how you check clearances on a PCB outline or the height of an antenna element above a ground plane.

GATE 2022 · EC · Q.8MCQ · 2 marksGraphs and geometry

Area of the quadrilateral with vertices P(0, 1), Q(0, -3), R(-2, -1), S(2, -1)?

Four points P, Q, R, and S represent the vertices of a quadrilateral.

What is the area enclosed by the quadrilateral?
  1. (A)4
  2. (B)
  3. (C)8
  4. (D)

Answer: (C) 8 Official key: C

  1. P and Q share , so PQ is vertical with length .
  2. R and S share , so RS is horizontal with length .
  3. The two segments cross at at a right angle, so they are the diagonals of the quadrilateral. Area : option (C).

Trap: (A) 4 is the length of each diagonal, not the area; the area needs both diagonals and the factor of one half. (B) and (D) bring in a that appears only if you use a slanted side.

The code ordered the four points around their centre, confirmed the shape is convex, and applied the shoelace formula: area 8. Diagonals 4 and 4; only (C) matches.

Where this shows up in industry

The shoelace formula is how layout tools compute the area of a polygon pad, a keep-out region or a die outline from its corner coordinates.

GATE 2023 · EC · Q.7MCQ · 2 marksGraphs and geometry

Which function has this graph: zero at the origin, two equal peaks, tails dying to zero

Which one of the following options represents the given graph?
Graph of f(x): zero at the origin, two equal peaks either side, symmetric about the vertical axis, flattening to zero far out0xf(x)
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (A) Official key: A

  1. The graph is mirror-symmetric about the vertical axis (even), never negative, zero at , and flat towards zero at both ends.
  2. (B) and (D) are odd, so one side would go negative. (C) is never negative but grows without bound as .
  3. (A) is even, non-negative, zero at 0 and shrinks to zero on both sides: option (A).

Trap: (B) has the same tail but is odd. Its peaks are at (height about 1.13).

The code tested all four functions on for evenness, sign and decay; only (A) passes. The EE 2023 paper used the same four options with an odd graph (answer B); here the graph is even.

Where this shows up in industry

Reading a response curve and matching it to a formula by symmetry, sign and tail behaviour is how an engineer checks a frequency or impulse response against a model.

GATE 2024 · EC · Q.7MCQ · 2 marksGraphs and geometry

Find the area of duct tape needed to wrap a bundle of four chalk-sticks once

Four identical cylindrical chalk-sticks, each of radius cm and length cm, are bound tightly together using a duct tape as shown in the following figure.
The width of the duct tape is equal to the length of the chalk-stick. The area (in cm) of the duct tape required to wrap the bundle of chalk-sticks once, is
Four identical cylindrical chalk-sticks of radius r and length l bound together with duct tape, 2 by 2rl
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (D) Official key: D

  1. Look at the end face: four circles of radius cm in a 2 by 2 block. Their centres form a square of side cm.
  2. The tape runs round the outside. Along each side of the block it lies flat for cm: four flat runs, cm.
  3. At each corner it follows a quarter circle of radius . Four quarters make one full circle: cm.
  4. One turn of tape is cm long. Its width is cm, so the area is cm.

Trap: (B) and (C) have 8 where the flat tape is only 4: each flat run is one diameter, cm, not cm. (A) doubles the whole result, which happens if you wrap the tape twice or use the full diameter as the radius.

The code built the convex hull of the four centres (perimeter 4 cm), added the corner arcs and multiplied by : area 71.42 cm; the options evaluate to 142.8, 222.8, 111.4, 71.4, so only (D) matches.

Where this shows up in industry

Wrapping a bundle and counting the perimeter is the same geometry as sizing heat-shrink or cable ties around a four-core cable, where the outer length depends on the stacking layout.

GATE 2025 · EC · Q.4MCQ · 1 markGraphs and geometry

Total length of a curve built by an iterative algorithm after iteration n

The following figures show three curves generated using an iterative algorithm. The total length of the curve generated after ‘Iteration ’ is:

Note: The figures shown are representative.
Three curves from the iterative algorithm: a straight line of length 1, then five segments of length 1/3 with one square bump, then twenty-five segments of length 1/9Iteration 0:1Iteration 1:1/3Length of each segment: 1/3Iteration 2:1/9Length of each segment: 1/9
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (B) Official key: B

  1. Iteration 0 is one segment of length 1.
  2. Iteration 1 replaces it by 5 segments, each long: length .
  3. Iteration 2 replaces each of those 5 segments by 5 shorter ones, giving 25 segments of length : .
  4. Each iteration multiplies the number of segments by 5 and the segment length by , so the total length is multiplied by every time: .

Trap: (C) doubles the exponent, as if the length grew by twice per step. At it gives , but the figure shows .

The code rebuilt the curve, got 5 segments of 1/3 (total 5/3) and 25 segments of 1/9 (total 25/9), and tested every option for n = 0 to 6; only (B) matches.

Where this shows up in industry

The same geometric growth shows up in fractal antenna design, where each iteration packs a longer conductor into the same footprint, and in how a rough PCB trace edge lengthens the real current path.

GATE 2025 · EC · Q.5MCQ · 1 markGraphs and geometry

Which plot represents f(x) = -|x|/x for non-zero real x?

Which one of the following plots represents , where is a non-zero real number?

Note: The figures shown are representative.
  1. (A)Plot option Af(x)x(0,1)(0,−1)
  2. (B)Plot option Bf(x)x(0,1)(0,−1)
  3. (C)Plot option Cf(x)x(−1,0)(1,0)
  4. (D)Plot option Df(x)x(0,1)(0,−1)

Answer: (A) Official key: A

  1. For , , so .
  2. For , , so .
  3. So the graph is a flat line at to the left of the y-axis and a flat line at to the right, with a gap at .
  4. Only (A) has on the left and on the right.

Trap: (B) is the plot of , the sign function, with the two levels swapped. Missing the leading minus sign lands here.

The code evaluated at six points (-3, -1, -0.25, 0.25, 1, 3) and compared each option's curve; only (A) agrees everywhere; (B) fails at every point, (D) agrees only at x = -1 and 1, and (C) is not the graph of a function.

Where this shows up in industry

The sign function is exactly what a comparator or a hard limiter does to an analog signal: output +1 or -1 depending on polarity, undefined right at zero.

GATE 2025 · EC · Q.7MCQ · 2 marksGraphs and geometry

A one-metre stick broken at b1 and b2: which condition is NOT necessary to form a triangle?

A stick of length one meter is broken at two locations at distances of and from the origin (0), as shown in the figure. Note that . Which one of the following is NOT a necessary condition for forming a triangle using the three pieces?

Note: All lengths are in meter. The figure shown is representative.
A stick of length one meter from 0 to 1, broken at distances b1 and b2 from the origin0b1b21
  1. (A)
  2. (B)
  3. (C)
  4. (D)

Answer: (D) Official key: D

  1. The pieces are , and , and they add up to 1.
  2. Three lengths form a triangle exactly when each one is shorter than the sum of the other two, which here means each piece is shorter than 0.5.
  3. is the first piece, gives , and gives . So (A), (B), (C) are all necessary.
  4. (D) is not: , gives pieces 0.3, 0.4, 0.3, a valid triangle, yet .

Trap: (D) looks like a "sum" condition and feels natural, but nothing in the triangle rule limits .

The code tried every pair on a grid of sixtieths, found 406 pairs that form triangles, and tested each option; (A), (B), (C) never fail, (D) fails for 4/15, 11/15.

Where this shows up in industry

Triangle-type feasibility checks come up when splitting a power or timing budget into three parts: each part has to stay below the sum of the others, or the design cannot close.

GATE 2026 · EC · Q.9MCQ · 2 marksGraphs and geometry

City of Atlantis: ratio of land area to water area in concentric rings

The city of Atlantis was crafted by the God of the seas, Poseidon. It was made of alternating concentric circular rings of land (shaded) and water (not shaded) as represented in the figure (not to scale). The radius of Inner Island was 2.5 stades (a unit of length used in ancient Greece). The water surrounding Inner Island was one stade wide (length AB). This was surrounded by two pairs of alternating rings of land and water. The first pair of land and water was two stades wide each (lengths BC and CD), and the outer pair is three stades wide each (lengths DE and EF).
The ratio of the surface area of the land to that of the water in the city of Atlantis is ________ (round off to two decimal places).
Atlantis: concentric rings around an inner island, shaded land and unshaded water, with points A to F marked along a radius from the centreABCDEFCenterInnerIsland
  1. (A)0.45
  2. (B)0.60
  3. (C)0.75
  4. (D)0.90

Answer: (C) 0.75 Official key: C

  1. Outer radii in stades: island , then , , , , (adding the widths 1, 2, 2, 3, 3).
  2. Land area is , which is .
  3. Water area is , which is .
  4. The ratio is , about 0.75: option (C).

Trap: (B) 0.60 or (D) 0.90 come from subtracting radii instead of squared radii, or from comparing widths. Area depends on , so wide outer rings count far more. The code summed exact ring areas with fractions: land 78.25, water 104, in units of , ratio 0.7524, which rounds to 0.75.

Where this shows up in industry

Ring areas scale with the square of the radius, the same reason a small increase in conductor diameter or a feed-horn aperture changes cross-section or gain so quickly.

From GATE prep to a core engineering career

Talk to a counsellor.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.