GATE ECE General Aptitude: spatial and picture questions solved (2022-2026)

Every GATE EC paper from 2022 to 2026 had General Aptitude questions you answer from a picture: 10 of them, worth 16 marks. They cover squares in a grid, a guard's view of a gallery, rectangles in a crossed square, creases after five folds, mirror and water reflections, folded sheets, a missing rectangle and an upside-down caption. Every figure is redrawn and every answer checked by a script that models the picture.

Questions from the General Aptitude section of official GATE EC papers (IIT Kharagpur 2022, IIT Kanpur 2023, IISc Bengaluru 2024, IIT Roorkee 2025, IIT Guwahati 2026); figures redrawn and solutions by Skill-Lync. · Updated 18 Nov 2026 · 10 questions

GATE 2022 · EC · Q.10MCQ · 2 marksFlips, rotations and missing pieces

Square with corners P, Q, R, S and centre T: which of XYZZ, XY and ZZZZ are equivalent?

Consider the following square with the four corners and the center marked as P, Q, R, S and T respectively.

Let X, Y and Z represent the following operations:
X: rotation of the square by 180 degree with respect to the S-Q axis.
Y: rotation of the square by 180 degree with respect to the P-R axis.
Z: rotation of the square by 90 degree clockwise with respect to the axis perpendicular, going into the screen and passing through the point T.

Consider the following three distinct sequences of operation (which are applied in the left to right order).
(1) XYZZ
(2) XY
(3) ZZZZ

Which one of the following statements is correct as per the information provided above?
A square with corners P top left, Q top right, R bottom right, S bottom left, both diagonals drawn, and the centre T where they crossTPQSR
  1. (A)The sequence of operations (1) and (2) are equivalent
  2. (B)The sequence of operations (1) and (3) are equivalent
  3. (C)The sequence of operations (2) and (3) are equivalent
  4. (D)The sequence of operations (1), (2) and (3) are equivalent

Answer: (B) Official key: B

  1. Z four times is a full turn (), so (3) ZZZZ leaves the square as it started.
  2. X then Y: two flips about the two diagonals together turn the square by in its own plane, so (2) XY swaps P with R and Q with S.
  3. (1) XYZZ is XY followed by two quarter turns (another ). Two half turns make a full turn, so (1) also returns every corner home. (1) and (3) are the same: option (B).

Trap: (A) or (D), by thinking XY is the same as XYZZ. They differ by ZZ, a half turn, and XY itself is already a half turn that moves the corners.

The code used 3D rotation matrices and tracked the four corners. XYZZ puts P, Q, R, S at P, Q, R, S; XY at R, S, P, Q; ZZZZ at P, Q, R, S. Only (1) and (3) agree.

Where this shows up in industry

Composing rotations and reflections to find the net effect is how you check that a sequence of IQ-mixer phase flips or a data-bus bit swap cancels out.

GATE 2024 · EC · Q.9MCQ · 2 marksFlips, rotations and missing pieces

Undo a mirror reflection and a water reflection to find the original seven-segment display

Examples of mirror and water reflections are shown in the figures below. An object appears as the following image after first reflecting in a mirror and then reflecting on water. The original object is
Examples of a mirror reflection and a water reflection of the digit 6, and the displayed image 5.24 in seven-segment styleMIRROR REFLECTIONWATERREFLECTIONThe image after a mirror reflection and then a water reflection:
  1. (A)Seven-segment display option
  2. (B)Seven-segment display option
  3. (C)Seven-segment display option
  4. (D)Seven-segment display option

Answer: (A) Official key: A

  1. A mirror reflection flips left and right: the order of the characters reverses and each digit swaps its left and right segments.
  2. A water reflection flips top and bottom: the order stays and each digit swaps its top and bottom segments.
  3. Both flips together equal a turn by 180 degrees. To undo them, turn the shown image 5.24 by 180 degrees: read it backwards and turn each digit upside down.
  4. 4 turned over becomes a lowercase h, 2 stays 2, the dot stays, 5 stays 5. The original reads h 2 . 5.

Trap: (C) is the picture after the mirror flip alone, and (B) is the picture after the water flip alone. Each undoes only one of the two reflections.

The code stored each digit as lit segments, applied a mirror and then a water reflection to every option, and compared with the shown image; only (A) matches (['A']). It also confirmed the two flips commute.

Where this shows up in industry

Seven-segment displays are common on bench meters and counters, and reading one in a mirror or on a reflective panel is the same transform that a lab technician applies to a camera image of the instrument.

GATE 2024 · EC · Q.10MCQ · 2 marksFlips, rotations and missing pieces

Fold a 24 cm by 16 cm sheet twice two ways and compare the perimeters of the results

Two identical sheets A and B, of dimensions , can be folded into half using two distinct operations, FO1 or FO2.
In FO1, the axis of folding remains parallel to the initial long edge, and in FO2, the axis of folding remains parallel to the initial short edge.
If sheet A is folded twice using FO1, and sheet B is folded twice using FO2, the ratio of the perimeters of the final shapes of A and B is
  1. (A)14:11
  2. (B)11:14
  3. (C)18:11
  4. (D)11:18

Answer: (A) 14:11 Official key: A

  1. FO1: the fold line is parallel to the 24 cm edge, so each fold halves the 16 cm side. After two folds: , then . Perimeter cm.
  2. FO2: the fold line is parallel to the 16 cm edge, so each fold halves the 24 cm side. After two folds: , then . Perimeter cm.
  3. Ratio A : B .

Trap: (B) 11:14 is the ratio the wrong way round. (C) 18:11 and (D) 11:18 match no fold pattern; they only catch guesses. Folding a long sheet along the wrong side gives different perimeters, so check which edge each fold line is parallel to.

The code folded the four corner points across each fold line and measured the result: A is 24 by 4 (perimeter 56), B is 6 by 16 (perimeter 44); the ratio 14/11 matches only 14:11, option (A).

Where this shows up in industry

Folding changes the outline while the area stays the same, the same way a folded PCB flex cable shortens its length without changing the number of traces it carries.

GATE 2026 · EC · Q.3MCQ · 1 markFlips, rotations and missing pieces

Which of P, Q, R, S is the missing rectangle WXYZ in a figure of three intersecting lines?

The figure below has exactly three intersecting line segments with a rectangular portion WXYZ missing. Which one of the following options P, Q, R, and S is the missing portion WXYZ?
A rectangle WXYZ is missing from a figure; three line segments enter and leave its edges: two near the top edge, one on each of the left and right edges, and two near the bottom corners?WXZY
  1. (A)Option P: the rectangle WXYZ with three line segments crossing itWXZY
  2. (B)Option Q: the rectangle WXYZ with three line segments crossing itWXZY
  3. (C)Option R: the rectangle WXYZ with three line segments crossing itWXZY
  4. (D)Option S: the rectangle WXYZ with three line segments crossing itWXZY

Answer: (D) Official key: D

  1. Follow each line outside the gap. One enters the top edge near the left third and leaves near the bottom of the right edge. One enters the top edge near the middle, slanting left, and leaves near the bottom-left corner. The third crosses from the left edge to the right edge, almost level.
  2. So the inside figure must join those entry and exit points in pairs, with the same slants.
  3. P has a left-to-right line that starts too high and ends too low. Q has a steep line near the right that matches nothing outside. R sends a line from the bottom up to the top-right corner. Only S joins all three pairs: option (D).

Trap: (C), because R also has a near-level line and a line going top-left to bottom-right, so it looks right at a glance. Its third line gives it away.

The code paired the six outside stubs by collinearity, then measured each option's line ends against them. Worst gaps (fraction of the rectangle): P 0.54, Q 0.49, R 0.49, S 0.06; only S is within 0.08.

Where this shows up in industry

Reading where a trace enters and leaves a hidden region is the same skill as following a PCB track under a component or a signal through a covered block on a schematic.

GATE 2026 · EC · Q.10MCQ · 2 marksFlips, rotations and missing pieces

If Ref Fig over 12 34 becomes 12 34 over Ref Fig upside down, what does GATE - 2026 over Aptitude Test become?

If the pair of lines “Ref Fig” above “12 34” is turned into “12 34” above “Ref Fig” with every letter upside down (figure below), then what does “GATE - 2026” above “Aptitude Test” become?
Worked example: the two lines Ref Fig and 12 34 become 12 34 over Ref Fig with every letter turned upside down. Then GATE - 2026 over Aptitude Test is to be transformed in the same wayIfRef Fig12 3412 34Ref FigThenGATE - 2026Aptitude Test?
  1. (A)Option P: Test Aptitude above GATE - 2026, every letter upside downTest AptitudeGATE - 2026
  2. (B)Option Q: Aptitude Test above 2026- GATE, every letter upside downAptitude Test2026- GATE
  3. (C)Option R: Aptitude Test above GATE - 2026, every letter upside downAptitude TestGATE - 2026
  4. (D)Option S: Test Aptitude above 2026 - GATE, every letter upside downTest Aptitude2026 - GATE

Answer: (C) Official key: C

  1. In the example the lines swap places (top becomes bottom), the letters turn upside down, and each line still reads left to right: Ref Fig, 12 34. That is a top-to-bottom flip, like a reflection in a horizontal mirror.
  2. Apply it to the new text: “Aptitude Test” comes to the top, “GATE - 2026” goes to the bottom, every letter upside down, word order unchanged.
  3. That is option (R), so answer (C).

Trap: (S), a full 180 degree turn. It also swaps the lines and turns letters over, but it reverses the word order too (“Test Aptitude”, “2026 - GATE”). The example keeps the order of “12 34”, so that is not what happened. (P) and (Q) reverse only one line.

The code tried four moves on the example and found that only “flip top-bottom” reproduces it, then applied that move and compared with all four options; only R matches.

Where this shows up in industry

Mirror and flip transforms appear when you check a PCB footprint or a chip pinout seen from the top against the same part seen from the bottom, where left-right and top-bottom are easy to mix up.

GATE 2025 · EC · Q.8MCQ · 2 marksPositions, layouts and mechanisms

Musical chairs with eight students in a circle: who is left after the 4th round?

Eight students (P, Q, R, S, T, U, V, and W) are playing musical chairs. The figure indicates their order of position at the start of the game. They play the game by moving forward in a circle in the clockwise direction.

After the 1st round, 4th student behind P leaves the game. After 2nd round, 5th student behind Q leaves the game. After 3rd round, 3rd student behind V leaves the game. After 4th round, 4th student behind U leaves the game. Who all are left in the game after the 4th round?

Note: The figure shown is representative.
Eight students P, R, T, Q, S, V, U and W standing in a circle, clockwise from the topPRTQSVUW
  1. (A)P; T; Q; S
  2. (B)V; P; T; Q
  3. (C)W; R; Q; V
  4. (D)Q; T; V; W

Answer: No option is correct (marks to all) Official key: MTA*

  1. Clockwise from the top the circle reads P, R, T, Q, S, V, U, W. Round 1: the 4th student from P is S, whichever way you count, so S leaves.
  2. Round 2: the 5th from Q is R if you count clockwise and U if you count anticlockwise.
  3. Counted anticlockwise, U is already out before round 4, so "the 4th student behind U" does not exist. That reading breaks.
  4. Counted clockwise, the leavers are S, R, P, V and the players left are Q, T, U, W. This is not any of the four options.

Trap: (D) Q; T; V; W matches the first three rounds, but it needs U to leave in round 4, and the question names U only as the place to count from.

The code ran 8 readings (direction, counting start, closing or keeping empty seats); 1 are playable and none leaves a set equal to any option. The official key is marks to all (MTA*).

Where this shows up in industry

A requirement that cannot be checked as written, such as a direction or a count with no clear origin, produces different results for different readers. Pinning down the reference point is part of writing a clean test procedure.

GATE 2022 · EC · Q.4MCQ · 1 markGrids, counting and step-by-step rules

Maximum number of squares without a hole in the interior in a 4 x 4 grid with one hole?

The figure shows a grid formed by a collection of unit squares. The unshaded unit square in the grid represents a hole.

What is the maximum number of squares without a “hole in the interior” that can be formed within the grid using the unit squares as building blocks?
A 4 by 4 grid of unit squares with the second square of the second row left unshaded as a hole; 1 unit scale marks on the right and bottom1 unit1 unit
  1. (A)15
  2. (B)20
  3. (C)21
  4. (D)26

Answer: (B) 20 Official key: B

  1. Count squares of every size in a grid: .
  2. Keep only those made entirely of shaded unit squares, so none covers the hole.
  3. Size 1: 15 (all except the hole). Size 2: 5 of the 9 avoid the hole. Sizes 3 and 4: none, because every one covers the centre block. Total : option (B).

Trap: (A) 15 counts only unit squares and forgets the larger ones. (C) 21 wrongly counts the hole as a unit square.

The code listed every square position and size and kept those whose cells are all shaded: 15, 5, 0, 0 of sizes 1 to 4, total 20.

Where this shows up in industry

Counting which sub-blocks of a regular array are fully usable around a defect is the same job as finding good die or intact memory blocks in a bank with one faulty cell.

GATE 2023 · EC · Q.5MCQ · 1 markGrids, counting and step-by-step rules

How many rectangles are in a square with both diagonals and an inscribed diamond

How many rectangles are present in the given figure?
A square with both diagonals and a diamond joining the midpoints of its four sides
  1. (A)8
  2. (B)9
  3. (C)10
  4. (D)12

Answer: (C) 10 Official key: C

  1. Put the square on a grid from to . The diamond joins the side midpoints and the diagonals cross at the centre.
  2. Tilted lines run in two perpendicular directions, three each: the diamond sides plus a diagonal. Choosing 2 of 3 in each direction gives tilted rectangles.
  3. Add the outer square itself: .

Trap: (B) 9 counts only the tilted rectangles and forgets the outer square.

The code listed every pair of parallel lines in perpendicular directions and kept a rectangle only when all four sides lie on drawn segments: 10 rectangles (9 tilted, 1 upright), so (C).

Where this shows up in industry

Counting shapes in a figure by lines and intersections is the same method used to count cells in a layout or paths in a grid-based routing problem.

GATE 2023 · EC · Q.10MCQ · 2 marksGrids, counting and step-by-step rules

Total creases visible when a 100 cm by 32 cm sheet folded 5 times is unfolded

A 100 cm × 32 cm rectangular sheet is folded 5 times. Each time the sheet is folded, the long edge aligns with its opposite side. Eventually, the folded sheet is a rectangle of dimensions 100 cm × 1 cm.

The total number of creases visible when the sheet is unfolded is ________.
  1. (A)32
  2. (B)5
  3. (C)31
  4. (D)63

Answer: (C) 31 Official key: C

  1. Each fold halves the 32 cm side: 32, 16, 8, 4, 2, 1 cm after five folds (so the stack has layers).
  2. Fold 1 makes 1 crease, fold 2 makes 2 more, fold 3 makes 4, fold 4 makes 8, fold 5 makes 16.
  3. Total: .

Trap: (A) 32 counts layers (the 32 strips), not the lines between them, and (B) 5 counts folds. A 6-fold count of 63 would need one more fold.

The code folded a 32 cm strip five times, tracked every layer's position, and found 31 distinct crease positions with a final width of 1 cm, so (C).

Where this shows up in industry

Doubling at each step and counting boundaries, , is how you count internal nodes of a binary tree or the stages and comparators in a hierarchical ADC or divider chain.

From GATE prep to a electronics hardware career

Talk to a counsellor.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.