Wiring harness routing & packaging Rules Week 3 Challenge

1.original equipment manufacturer 2.Automotive designer responsibilities include Drafting layouts of automobile components, assemblies and systems using sketches, models, prototypes and CAD software Designing and testing various components of automobiles, such as fuel technologies, safety systems, brackets and torsion…

 AIM  Route the following harness layout in Electrical workbench by using following connectors as shown in layout diagram. Objectives Route the following harness layout in Electrical workbench. Make assumption for harness bundle diameters. Use Following connectors as shown in layout diagram. Add protective covering…

AIM • To solve the above assignment questions and define the necessary electrical properties in the respective workbench. OBJECTIVE To download the P-Clamp CAD data and define it as Electrical Support in the Electrical Part design workbench and also define the necessary electrical properties. To download the Backshell…

AIM Download following connectors & Connector clip cad data from given link & define it as Electrical Connector using Electrical Part design Workbench. Define all the necessary properties to Connectors & Clip. INTRODUCTION TO WIRING HARNESS CONNECTOR DEFINATIONS IN CATIA V5 1. Deutsch DT06-08SA Connector…

AIM Design inner panel and outer panel of the back door with reinforcements and analyse by draft analysis. Objective To design Back door of car using the given Class 'A' surface. Create hinge,gas stay,wiper motor,latch and stricker reinforcements. Create inner panel with embosses,sealing flange and mastic regions. Create…

Aim Design roof and its reinforcements and analyse with curve study. OBJECTIVE The objective of this project is to design car roof with essential flanges and reinforcements like ditch area, front roof rail, bow roofs, central roof rail and rear roof rail for the the given styling surface. Perform a curvature study on the…

AIM Design fender with all kinds of mounting according to the given data. Objective 1. Design Drip Area, 2. Design Sill Mount Area 3. Design Body Mount Area 4. Design Bumper Mount Region and A-pillar mount Region. INTRODUCTION Fender is the part of an automobile, motor cycle or other vehicle body that frames a wheel well…

Aim Calculate the Wheel Arc area in Europe standard and prove that  whether the car will meet the the requirements of the standards. FENDER Fender is the US English term for the part of an automobile (vehicle body) that frames a wheel well (the fender underside). Its primary purpose is to prevent sand, mud, rocks,…

Aim: To find the section modulus of the hood and optimization to improve the overall section modulus. Objective: Use the section from your Hood design and calculate the section modulus using the formula S= I/y. Section Modulus: Section modulus is a geometric property for a given cross-section used in the design of beams…

Aim Design hood as per master section in NX cad. Objective Design hood outer panel, inner panel and reinforcements with the given outer hood skin, master section and design parameters. Introduction The hood or bonnet is the hinged cover over the engine of motor vehicles. Hoods can open to allow access to the engine compartment…

Under body coating The underbody of your car is always exposed to muddy water, stones, rugged roads, and potholes. This makes it prone to wear and tear, which is often not in plain sight but could lead to serious issues  We all are aware of the fact that the underbody of the previous models was made from durable metals…

AIM To prepare a report explaning what is benchmarking.compare atleast 4 CARS and Provide a proper conclusion for the report,suggesting a suitable vehicle among the comparison made. WHAT IS BENCHMARKING? Benchmarking in the automobile industry involves a structured comparison between similar products, services or processes…

Object  The objective of the project is to carry Draft Analysis by creating the tooling direction for the given Class-A surface. Create the class B and C surface for the A piller  with the given Class-A surface and master section design a component. Create Attachment feature dog house as per mastersection…

  Object  The objective of the project is to carry Draft Analysis by creating the tooling direction for the given Class-A surface. Create the class B and C surface for the Door handle with the given Class-A surface to design a component. Create Attachment feature like ribs and screw boss. Introduction …

Object  The objective of the project is to carry Draft Analysis by creating the tooling direction for the given Class-A surface. Create the class B and C surface for the Door handle with the given Class-A surface to design a component. Create Attachment feature Dog house. Introduction  INTRODUCTION:…

Object  The objective of the project is to carry Draft Analysis by creating the tooling direction for the given Class-A surface. Create the class B and C surface for the Door handle with the given Class-A surface to design a component. Create Attachment feature like ribs and screw boss. Introduction  INTRODUCTION: The…

OBJECTIVE: The objective of the project is to carry Draft Analysis by creating the tooling direction for the given Class-A surface. Create the class B and C surface for the Switch bezal with the given Class-A surface to design a component. Create core,cavity,parting line,parting surface for the switch bezal.…

BUMPER Object  The objective of the project is to carry Draft Analysis by creating the tooling direction for the given Class-A surface. Create the class B and C surface for the Bumper with the given Class-A surface to design a component. Introduction  INTRODUCTION: The Draft Analysis command enables…

OBJECTIVE: The objective of the project is to carry Draft Analysis by creating the tooling direction for the given Class-A surface. Create the class B and C surface for the Coin holder with the given Class-A surface to design a component. DRAFT ANALYSIS: INTRODUCTION: The Draft Analysis command enables you to…

OBJECTIVE: The objective of the project is to carry Draft Analysis by creating the tooling direction for the given Class-A surface. Create the class B and C surface for the Switch bezal with the given Class-A surface to design a component. DRAFT ANALYSIS: INTRODUCTION: The Draft Analysis command enables you to…

DESIGN AND DRAFT ANALYSIS OF BASE BRACKET OBJECTIVE: The objective of the project is to carry Draft Analysis by creating the tooling direction for the given Class-A surface. Create the class B and C surface for the Base bracket with the given Class-A surface to design a component. DRAFT ANALYSIS: INTRODUCTION:…

Sunseeker Predator yacht report   OBJECTIVE: The main objective is to create solid modelling, and surface modelling of different parts in Sunseeker Predator yacht. How to assemble different parts of the Sunseeker Predator yacht Creating a rendered image using Photo View 360. Software’s used Solid works 2021…

Modelling of American chopper in solid works Introduction Solid work is most commonly used modeling software in all kind of industries especially mechanical and automotive industries. Primarily used in the R&D Sector to Model 3D parts using 2D sketch. And it have wide verity options to specify Materials and add-in…