Tool Test-2

TITLE: Creating connection for Rear door. Summary: In this project, we have consider a meshed element door panel assembly. So far NVH is conserned, a door panel being an important assembly various joints , coonections has been assigned to it.  Introduction: In NVH, a door panel is an important part. In order to simulate,…

REFER LINK:  https://skill-lync.com/student-projects/radioss-interfaces-study-of-effect-of-notches-challenge-2 TITLE: RADIOSS Interfaces & Study of Effect of Notches Challenge   SUMMARY: Here, we have simulate the crash tube model.The crash tube model is provided with a rigid support on its front, while…

TITLE: RADIOSS Interfaces & Study of Effect of Notches Challenge   SUMMARY: Here, we have simulate the crash tube model.The crash tube model is provided with a rigid support on its front, while a pushing force at its end so that the impact can be capture, visualize & desired results are carried out. For the…

Refer link : https://skill-lync.com/student-projects/radioss-material-laws-challenge-2 ASSIGNMENT 4- Compare 7 cases as discussed in last 3 slides, in a tabulated format on the basis of: 1. Total number of cycles, Energy error, mass error and simulation time.2. Notice the animation of all 5 and describe the animations…

TITLE: RADIOSS Material Laws Challenge   AIM: To run the simulation for a Rigid ball-Plate model using Johnson cook material and elastoplastic material along with brittle failure using Radioss.   OBJECTIVE:  Run the simulation by changing the material, shell properties and failure parameters. Run the…

Refer link : https://skill-lync.com/student-projects/2d-element-formulation-challenge   AIM: To run the simulation of a crash beam model ith base simulation (default values) followed by improved shell element properties (recommended properties) PROCEDURE: Objective 1. Using the crash beam file from the previous…

AIM: To run the simulation of a crash beam model ith base simulation (default values) followed by improved shell element properties (recommended properties) PROCEDURE: Objective 1. Using the crash beam file from the previous assignment, change the run time to 55 ms. Firstly, we need to import the Radioss file in solver…

Refer: https://skill-lync.com/student-projects/radioss-engine-file-editing Questions: 1. Check the material properties of the rail component and calculate the speed of sound in steel rail=_______ 2. The length of the rail is about 1000 mm.calculate the time takes for a shock wave to travel from one end of…

TITLE: 3D Meshing tetra mesh and hex mesh.   INTRODUCTION: A tetrahedral element is a volume with four faces and is analogous to a triangle in two dimensions. It is also the ratio of the volume of the tetrahedron made by the point with the plane containing nodes 2, 3 and 4. While, A hexahedral…

Questions: 1. Check the material properties of the rail component and calculate the speed of sound in steel rail=_______ 2. The length of the rail is about 1000 mm.calculate the time takes for a shock wave to travel from one end of the rail to the other. 3.Time for sound to travel length of rail=______ 4.Edit…

Hello sir, Please find below attached link of Project/Assignment https://skill-lync.com/student-projects/2d-meshing-of-components-using-hypermesh   TITLE: 2D Meshing of Components using Hypermesh   SUMMARY: Here, we have consider three different CAD Geometry whose geometry cleanup has been done followed…

TITLE: 2D Meshing of Components using Hypermesh   SUMMARY: Here, we have consider three different CAD Geometry whose geometry cleanup has been done followed by its midsurface extraction and meshing. Each model has been undergone different methodology to achieve desired mesh. Following are the objectives, introduction…

TITLE : Solid Meshing of Intake Manifold SUMMARY: Solid geometry of fuel intake manifold is consider, whose geometry cleakup has been done followed by setting mesh parameter, quality criteria and batch mesh. Batch mesh allows to mesh the model along with defeaturing capabilities. Later mesh is erased and remeshed using…

https://skill-lync.com/projects/solid-meshing-2 https://skill-lync.com/projects/solid-meshing-2

TITLE: Solid meshing of Rear view mirror component.   SUMMARY: A vehicle's rear view mirror component is consider here, we perform a solid meshing on it. Initially the solid geometry is consider, which is checked and certain errors, abnormalities are fixed followed by its mesh execution. Here, after regular mesh…

            For the switch panel component, i faces a lot of difficult in eliminating off elements, followed by trias %. Extraction of mid surface using manual & automatic method was execute easily, followed by meshing.

TITLE: 2D Meshing for a Bottle Cap Plastic Components.   SUMMARY: In this project, we execute 2D Meshing for a Bottle cap Plastic Component. A 3d solid geometry is under consideration, whose mid surface has been exectracted followed by meshing. It consists of various geometric features such as ribs, threads and teeths…

TITLE: 2D Meshing for sheet metal component.   SUMMARY: In this project we have execute 2D meshing of a vehicle's hood. A hood, also referred to as a bonnet is the hinged cover that rests over the engine of a front-engine. Using ANSA software, the geometric hood componet's mid surface has been takeout and subsequently…

TITLE: File Parsing of a Thermodynamic Converge data file and creating a Data Visualizer tool using PYTHON.   SUMMARY: In this project, we are going to understand file parsing of a thermodynamic converge data file and creating a data visualizer with the help of PYTHON.   INTRODUCTION:  Parsing is the…

TITLE: Curve fitting using Python Programming SUMMARY: In this project, we have performed a curve fit using Python programing. We have provided the data for temperature and specific heat respectively. Now, using the desired libraries we are able to plot the curve between the temperature & specific heat using…

TITLE:  Finding the  minimum pressure using Newton-Raphson method for Breaking Ice with Air cushion Vehicle. SUMMARY: In this project we have used python programming in such a way to determine the minimum cushion pressure which is needed to break a given thickness of ice using air cushion vehicle by calculating…

TITLE: Constraint Minimization.   SUMMARY: In this project, we have minimize a simple non-linear function using Lagrange Multiplier. In order to do so, we have following function as `f(x,y)=5-(x-2)^2-2(y-1)^2` and constrain equation is given as `x+4y=3`    INTRODUCTION: Engineering applications…

TITLE: Simulating the transient behavior of a simple pendulum using Python Programming.   SUMMARY: In this project, using the second order differential equation of damped oscillatory motion we have visualize its displacement and velocity followed by creating the animation of simple pendulum.   INTRODUCTION:…

TITLE: PV Diagram visualizer of Air standard Cycle (Otto Cycle) using Python Programming.   SUMMARY: This project deal with visualization of visualize of Air standard Cycle also know as Otto Cycle. So far the Thermodynamic cycles are concerned, we know that an otto cycle  is a description of what…

TITLE: Executing a Python Programe to simulate the forward kinematics of a 2R Robotic Arm.   SUMMARY: Here, using Python programming we have solve the forward kinematics of a 2R Robotic Arm Manipulator. Being Robotics is an emerging branch of science, one should know the kinematics of linkages in order to simulate…

TITLE: Execute a Python program to calculate Drag forces over a moving bicycle due to fluid flowing over it.   SUMMARY: In this project, we have executed a Python program in order to calculate the drag forces that takes place due to flow of fluid (in this case air) over a bicycle. The cyclist experiences drag…

TITLE: Frontal Impact car crash simulation.   SUMMARY: In this final project, we have sucessfully simulate a car crash simulation. To be more specific, we have simulate a frontal impact car crash. Based on defination of a car crash, a fronal impact crash mainly focus on either hitting a car to a wall or a wall to…

TITLE: Explicit Dynamic Analysis of a Bullet Penetrating a Bucket.   SUMMARY: In this project, using Ansys Workbench Explicit Dynamics we have carried out an Analysis of a Bullet Penetrating a Bucket. A bucket is fixed at a particular area of space and the bullet is provided with a certian amount of veleocity…

TITLE: Tension and Torsion Analysis of Steel 1006 specimen.   SUMMARY: As the project title suggests, here we have performed Tension as well as Torsion test on a Steel 1006 specimen using Ansys Explicit Dynamic. In order to execute a sucessful simulation to be went through, we assigned tension condition first…

TITLE: Explicit Dynamic Analysis of Machining with planer.   SUMMARY: In this Project, we have performed an Explicit Dynamic Analysis of Machining with planer using Ansys Workbench Explixit Dynamic module itself. Since the analysis is consist of a cutting tool which feeds the workpiece allow it to cut in chips here,…

TITLE: Performance of Transient structural analysis on a worm gear assembly.   SUMMARY: In this project, we simulate a transient structural analysis on a Worm-Gear assembly. A full size Worm is allowed to rotate a Half size of Gear. The both assembly is provided with necessary contacts, connections as well as joint…

TITLE: Transient structural analysis on a double universal joint.   SUMMARY: In this project, we have perform a transient structural analysis on a double universal joint with a spring using three different types of materials such as (Structural Steel, Stainless Steel and Titanium alloy). The main objective…

TITLE: Transient analysis on a Long piston and Cam mechanism.   SUMMARY: In this project we have performed a transient analysis on a piston-cam mechanism. Our purpose behind the transient simulation is due to unsteady condition appearing on model. Here, the cam & follower model is taken under consideration and…

TITLE: Structural Analysis of Sphere pressing on a plate   SUMMARY: In this Project, we have simulated a sphere pressing on a plate in order to study the plastic deformation for Non-Linear Material. We have provide certain amount of deformation for the sphere which will press the plate followed by its retraction &…

TITLE:  Structural Analysis Of a Wire Bending Operation   SUMMARY: So far the structural analysis of a bending wire is concerned, inthis project we have done on just not a single but for three different materials for Wire, which is to be undergoes bending operation. Our main focus during entire simulation…

TITLE:  Simulating a Rolling Operation on a workpiece made up of Copper.   SUMMARY:  Here, In this respective simulation we are going to simulate a Rolling Operation. It consist of a Workpiece which is copper and is being rolled between two Rollars. The generated  parameters shall be our Area of…

TITlE: Verification of Weld Joints on Plates-Ribs assembly.   SUMMARY: In this project, we are simulating the verification of Welds on Plates-Ribs assembly. Our main focus during the entire simulation is on how assigning different material properties for different part on assembly rapidly changes the Parameter's…

TITLE: Static Structural Analysis on Sheet Metal Bending Using Ansys Workbench   SUMMARY: In this project, usually performing static structural analysis on a Geometric Model we have  performed same analysis for three different Varying Materials. Our main focus during entire simulation had observed on how…

TITLE: Performance of static structural Analysis on Railwheel & Track.   SUMMARY: In this project, we have performed a ststic structural analysis on  Railwheel & Track by means of Providing not only one but, three different types of Load. They are 'Fixed', 'Planer' and 'Transitional'. Later…

TITLE: Grid Dependency Test on a Bevel Gear.   SUMMARY: In this Project, we are going to know what exactly the term "GRID INDEPENDENCY" means. Meanwhile we will be Performing a grid dependency test for the Bevel gear simulation for mesh sizes of 6,5 and 4 mm Respectively. Various Parameters such as Von-Mises…

TITLE: understanding the effect of static structural analysis on a Spur Gear. SUMMARY: In this project,we are going to perform a static structural analysis on a Spur Gear with under three different materials assigned.Here we will be keeping the Boundary Conditions constant and will carryout the results for differnt…

Stress Concentration on a Plate with Hole Introduction:For case 1,the structural analysis is carried on a plate with multiple holes.The material used here is Structural steel,with dimensions 100mm*100mm as length,with thickness about 15mm and hole of 20mm diameter.The plate is tested under static analysis. case 1:…