To Design RC column and beam for RC residential structure using TSD

Q1Aim:- to run the analysis of the structure and design reinforced concrete beam and column

procedure:- open the tekla model and run the analysis

. now select any of the column member and right click on it

. then select the interactive design from the given option

. check whether the member is passing through all the design checks

COLUMN NO: 16

. here we can see that the column is safe in design and consider the reinforcement details

COLUMN NO :15 here we can see that the ratio of longitudinal bars is greater than 1

. edit the rebar details to obtain the ratio of longitudinal bars as 1

. try to change the rebar details of the top reinforcement and bottom reinforcement

RESULTS:- the design of the columns is done and verified with the design checks

Aim:- to design the beam member and verify it for the design checks

procedure:-

. open the tekla model and run the analysis

. now select any of the beam member and right click on it

. then select the interactive design from the given option

. verify for the design checks

BEAM NO: 15

BEAM NO: 11

. the above beam is not satisfied with the deflection check.

. to verify the beam for deflection increase the depth of the beam section

RESULTS:- the beam design is checked and necessary correctopns have been done