DRAFT ANALYSIS OF A FAN COVER AIM: To Create the tooling axis for the given Fan cover model meeting the requirements of the draft angle and perform the Draft analysis on the model. DRAFT ANALYSIS: Draft analysis is performed based on color ranges identifying zones on the analyzed element where the deviation from the draft…

DRAFT ANALYSIS OF A BASE BRACKET AIM: To Create the Base Bracket Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and also Create the Class B Surface & Class C Surface. At the end perform…

DRAFT ANALYSIS OF A SWITCH BEZEL AIM: To Create the Switch Bezel Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and also Create the Class B Surface & Class C Surface. At the end perform…

DRAFT ANALYSIS OF CENTER CONSOLE COIN HOLDER AIM: To create the center console coin holder plastic component through the given class a surface and at the end performing the draft analysis on the model. OBJECTIVE: To ensure proper tree structure is followed. Geometrical sets should have a proper name based on the sketches…

CORE AND CAVITY DESIGN OF A SWITCH BEZEL AIM: To Create the Switch Bezel Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and also Create the Class B Surface & Class C Surface. At the end…

RIB DESIGN AIM: To Create the rib for the Centre console coin holder. INTRODUCTION: Ribs provide a means to economical stiffness and strength in molded parts without increasing overall wall thickness. They also facilitate Locating and arresting components of an assembly Providing alignment in mating parts Acting as stops…

DESIGN THE SCREW BOSS AND DOG HOUSE AIM: To Design the screw boss and Dog House for the Centre console coin holder. 1.SCREW BOSS: INTRODUCTION: Introduction Bosses are protuberances on a plastic part designed to add strength, to facilitate alignment during assembly, to provide for fastening, etc. Currently, many boss design…

DOOR APPLIQUE DESIGN WITH ENGINEERING FEATURES AIM: Creating the Driver Door RH Applique plastic component through the given Class A Surface. To begin with, the tooling axis for the given Class A Surface is created to meet the requirements of the draft angle and at the end perform the draft analysis on the model. Creating…

DESIGN OF B-PILLAR MASTER SECTION AIM To Create a Solid Body of the B - Pillar from the input provided as the class A surface and attachment features for fixing the component at appropriate position with the main component following the OEM design standards using CATIA V5 software. INTRODUCTION B- Pillar The B- Pillar…

In this challenge, I have to design part models and assemble the parts from the 2D sketches and dimensions provided to me. QUICK RETURN MECHANISM: A quick return mechanism is an apparatus to produce a reciprocating motion in which the time taken for travel in return stroke is less than in the forward stroke. It is driven…

DOOR ARM REST BEZEL AIM: To create the door arm rest plastic component through the given Class A surface and at the end performing the draft analysis on the model. OBJECTIVES: To ensure proper tree structure is followed. Geometrical sets should have a proper name based on the sketches present inside of it. All the sketches…

DEVELOPMENT OF A DOOR TRIM PANEL: AIM: To design and development of vehicle interior door trim using catia v5 tool using give A class surface and adding thickness to it. Also to create a Ribs and locators as per the given master section INTRODUCTION: This project explain in brief regarding the design life cycle followed…

AIM: Study the underbody coating used in automobile industries. Objectives: Study about underbody coating Study about types of underbody coating and its advantages and disadvantages. Procedure: Underbody coating is usually a dense cladding (often based on rubber) applied uniformly to the undercarriage of the automobile.…

Aim: To prepare a report explaining what is benchmarking, compare at least 4 vehicles and provide a proper conclusion for the report, suggesting a suitable vehicle among the comparison made. What is Benchmarking? It is the process of comparing one's business process and performance metrics to industries bests and/or best…