Vishal Patil
designing tall and earthen building for all loads with optimum costing.
Introduction
12 Projects
Project on Concrete Mix Design for various grades of Concrete
ANS 1 - STIPULATIONS FOR PROPORTIONING DATA FOR MATERIALS TARGET STRENGTH FOR MIX PROPORTIONING M30 MIX DESIGN OF CONCRETE GRADE WITH FLY ASH 1 GRADE DESIGNATION M30 TYPE OF CEMENT OPC53 MAX. NOMINAL SIZE OF AGGREGATE 20MM MIN. CEMENT CONTENT 320 kg/m3 MAXIMUM WATER-CEMENT…
25 Sep 2021 01:26 AM IST
Sketch a G+1 residential plan according to Vaastu Shastra and Calculation of Loads as per IS code
ANS – DRAWINGS ARE THE MOST IMPORTANT THINGS WE NEED TO START ANY CONSTRUCTION PROJECT. THERE ARE DIFFERENT TYPES OF DRAWINGS FOR DIFFERENT PURPOSES. CONSTRUCTION DRAWINGS PROVIDE DETAILED MEASUREMENTS AND CLEAR SECTION OF EVERY BUILDING PART. AFTER REVIEWING, THE DRAWINGS ARE JUSTIFIED AND MODIFIED…
06 Jan 2022 03:54 PM IST
Creation of geometries by Coordinate system methods using AutoCad
P1 PROCEDURE - 1. INTIALLY GO FOR START UP AND SET AUTOCAD WORK INTO IMPERICAL SCALE i,e - (INCHES AND FEETS) AND CHECKING ALL THE DESIGN DETTINGS. 2. USE LINE TOOL AND ENTER THE FIRST CO-ORDINATES , 3. THAN PROCEED WITH SAME COMMAND TO NEXT POINT BY ADRESSING LIKE @( X,…
22 Jan 2022 07:39 AM IST
Creating a Floor plan, Footing detail and Isometric view using AutoCad
1. PROCEDURE - INTIALLY GO FOR START UP AND SET AUTOCAD WORK INTO IMPERICAL SCALE i,e - (INCHES AND FEETS) AND CHECKING ALL THE DESIGN DETTINGS. USE LINE TOOL AND ENTER THE FIRST CO-ORDINATES , THAN PROCEED WITH SAME COMMAND TO NEXT POINT BY ADRESSING LIKE @(…
23 Mar 2022 01:35 PM IST
Drafting of various geometries using Chamfer, Fillet tool in AutoCad
INTIALLY GO FOR START UP AND SET AUTOCAD WORK INTO IMPERICAL SCALE i,e - (INCHES AND FEETS) AND CHECKING ALL THE DESIGN DETTINGS. USE LINE TOOL AND ENTER THE FIRST CO-ORDINATES , THAN PROCEED WITH SAME COMMAND TO NEXT POINT BY ADRESSING LIKE @( X, Y) COORDINATES OR …
16 Jun 2022 03:08 PM IST
Creating a Residence Layout, Seating plan, Toilet and Utility room plan using AutoCad
Q1- AIM - SKETCH THE GIVEN LAYOUT IN AUTOCAD BY REFEREING ABOVE GIVEN PLAN AND VALIDATE THE DIMENSIONS. PROCEDURE- 1.SET THE AUTOCAD SETTINGS LIKE UNITS AND LIMITS IN FEETS. 2. USE THE LINE TOOLS FOR DRAWING OUTER WALL ALONG LENGTH AND BREADTH. 3. USING OFFSET TOOLS PROVIDE OFFSET THICKNESS FOR INNER WALLS AND OUTER…
19 Jun 2022 04:38 PM IST
Creation of Column Schedule and Drawing Template using AutoCad
1. INTIALLY GO FOR START UP AND SET AUTOCAD WORK INTO IMPERICAL SCALE i,e - (INCHES AND FEETS) AND CHECKING ALL THE DESIGN DETTINGS. USE LINE TOOL AND ENTER THE FIRST CO-ORDINATES , THAN PROCEED WITH SAME COMMAND TO NEXT POINT BY ADRESSING LIKE @( X, Y) COORDINATES OR …
12 Jul 2022 08:13 AM IST
Creating a Wardrobe detailed drawing, Floor Plan, Kitchen Layout and Column Detail using AutoCad
Q1 ANS - WARDROBE - https://drive.google.com/file/d/1xhB3IEbUPXlJY1k7alXRnmPozD0yutxa/view?usp=sharing PROCEDURE- INTIALLY GO FOR START UP AND SET AUTOCAD WORK INTO IMPERICAL SCALE i,e - (INCHES AND FEETS) AND CHECKING ALL THE DESIGN DETTINGS. USE LINE TOOL AND ENTER THE FIRST CO-ORDINATES…
07 Sep 2022 04:07 AM IST
Creating a Layout, Section and Elevation with dimensions using AutoCad
Q1 AIM- To Create the Plan and Sections of given drawings using proper dimension techniques and dimension styles to document the project and assuming the sizes of the doors and windows as per construction standards. INTRODUCTION- From the given drawing of residential building plan with multiple master bed room plan,…
09 Sep 2022 04:59 PM IST
Project 1 _Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings
Q1 AIM- To Create the Plan and Sections of given drawings using proper dimension techniques and dimension styles to document the project and assuming the sizes of the doors and windows as per construction standards. INTRODUCTION- From the given drawing of residential building plan with multiple master bed room plan,…
10 Jan 2023 08:18 AM IST
Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad
AIM- To Create the Legend details, doors elevation and bar bending schedule from given drawings using proper dimension techniques and dimension styles to document the project and assuming the sizes of the doors and windows as per construction standards. INTRODUCTION- From the reference of the given attached document,Drawing…
12 Jan 2023 05:30 AM IST
Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad
AIM- To Create the kitchen, building elevationand section of pump house from given drawings using proper dimension techniques and dimension styles to document the project and assuming the sizes of the doors and windows as per construction standards. INTRODUCTION- From the reference of the given attached document,Drawing…
20 Jan 2023 09:04 AM IST
2 Course Certificates
Academic Qualification
M.Tech
Dayananda Sagara College of Engineering
10 Aug 2017 - 04 Sep 2019
12th
Narayana Junior College
04 Aug 2010 - 07 Aug 2012
10th
Kendriya Vidyalaya AFS Bidar
02 Jul 2009 - 02 Jul 2010
Here are the courses that I have enrolled
Similar Profiles
Ladder of success cannot be climbed with hands in pocket.
The Future in Motion
Give more than what you get you will get more than what you gave
Avid learner