Creating a Wardrobe detailed drawing, Floor Plan, Kitchen Layout and Column Detail using AutoCad

Q1

ANS - WARDROBE - https://drive.google.com/file/d/1xhB3IEbUPXlJY1k7alXRnmPozD0yutxa/view?usp=sharing

PROCEDURE-

2. INTIALLY GO FOR START UP AND SET AUTOCAD WORK INTO IMPERICAL SCALE i,e - (INCHES AND FEETS) AND CHECKING ALL THE DESIGN DETTINGS.
3. USE LINE TOOL AND ENTER THE FIRST CO-ORDINATES ,
4. THAN PROCEED WITH SAME COMMAND TO NEXT POINT BY ADRESSING LIKE @( X, Y) COORDINATES OR @( DISTANCE < ANGLE).
5. FROM THE GIVEN DRAWING ,IDENTIFY THE POSSIBLE CO-ORDINATES , THAN USING ABOVE NO.2 STEP RPOCEED WITH LINE DRAWING.
6. IF LINE CONNECTED ARE EXCEEDING IN ITS LENGTH OR MISMATCH APPEARED THAN ,USE ERASE OR CLT + Z FOR UNDO THE WORK.
7. AFTER CONNECTING ALL COORDINATES AS SHOWN IN ABOVE PICTURE, USE ALIGN TOOL FOR MEASUREING DISTANCES FOR VERFICATION CO-ORDINATE DISTANCE.
8. USE TEXT TOOL FOR LABELLING THE POINT / CORNER OF DRAWING .
9. SIMPLY USE COPY TOOL FOR COPYING TEST PASTE AT CERTAIN LOCATIONS AND RELABELLING IT RESPECTIVELY .
10. WHILE USING LINE TOOL ,CHECK THAT LINE IS SELECT IN SINGLE LAYER FOR ENTIRE DRAWING.
11. AFTER COMPLETIION SAVE THE DRAWING WITH RESPECTIVE NAME IN dwg. FORMAT ONLY. AND UPON REOPENING SELECT THE SAME DRAWING AS READ ONLY.

RESULT DISCUSSION-

LIVSPACE’S DESIGN IDEAS IS YOUR ONE-STOP SHOP FOR WARDROBE SOLUTIONS. OUR MODULAR WARDROBE DESIGNS ARE ERGONOMICALLY DESIGNED AND COME IN A WIDE SPECTRUM OF COLOURS, FINISHES AND MATERIALS. BUILT FOR SMART STORAGE, OUR CUPBOARD DESIGNS ARE FUNCTION-FORWARD, EASY TO USE AND PROMISE TO MAKE STUNNING ADDITIONS TO THE SPACES IN YOUR BEDROOM.

Q2

ANS- FLOOR PLAN- https://drive.google.com/file/d/1BQiiwotsqtq4viOSA66yYkEh_WTYldgG/view?usp=sharing

PROCEDURE -

1. INTIALLY GO FOR START UP AND SET AUTOCAD WORK INTO IMPERICAL SCALE i,e - (INCHES AND FEETS) AND CHECKING ALL THE DESIGN DETTINGS.

2. USE LINE TOOL AND ENTER THE FIRST CO-ORDINATES ,
3. THAN PROCEED WITH SAME COMMAND TO NEXT POINT BY ADRESSING LIKE @( X, Y) COORDINATES OR @( DISTANCE < ANGLE).
4. FROM THE GIVEN DRAWING ,IDENTIFY THE POSSIBLE CO-ORDINATES , THAN USING ABOVE NO.2 STEP RPOCEED WITH LINE DRAWING.
5. IF LINE CONNECTED ARE EXCEEDING IN ITS LENGTH OR MISMATCH APPEARED THAN ,USE ERASE OR CLT + Z FOR UNDO THE WORK.
6. AFTER CONNECTING ALL COORDINATES AS SHOWN IN ABOVE PICTURE, USE ALIGN TOOL FOR MEASUREING DISTANCES FOR VERFICATION CO-ORDINATE DISTANCE.
7. USE TEXT TOOL FOR LABELLING THE POINT / CORNER OF DRAWING .
8. SIMPLY USE COPY TOOL FOR COPYING TEST PASTE AT CERTAIN LOCATIONS AND RELABELLING IT RESPECTIVELY .
9. WHILE USING LINE TOOL ,CHECK THAT LINE IS SELECT IN SINGLE LAYER FOR ENTIRE DRAWING.
10. AFTER COMPLETIION SAVE THE DRAWING WITH RESPECTIVE NAME IN dwg. FORMAT ONLY. AND UPON REOPENING SELECT THE SAME DRAWING AS READ ONLY

RESULT DISCUSSION-

A FLOOR PLAN IS A TYPE OF DRAWING THAT SHOWS YOU THE LAYOUT OF A HOME OR PROPERTY FROM ABOVE. FLOOR PLANS TYPICALLY ILLUSTRATE THE LOCATION OF WALLS, WINDOWS, DOORS, AND STAIRS, AS WELL AS FIXED INSTALLATIONS SUCH AS BATHROOM FIXTURES, KITCHEN CABINETRY, AND APPLIANCES. FLOOR PLANS ARE USUALLY DRAWN TO SCALE AND WILL INDICATE ROOM TYPES, ROOM SIZES, AND WALL LENGTHS. THEY MAY ALSO SHOW FURNITURE LAYOUTS AND INCLUDE OUTDOOR AREAS. FLOOR PLANS ARE AN ESSENTIAL PART OF REAL ESTATE MARKETING, AS WELL AS HOME BUILDING, INTERIOR DESIGN, AND ARCHITECTURE PROJECTS. FLOOR PLANS SHOW THE RELATIONSHIP BETWEEN ROOMS AND SPACES, FURNITURE LAYOUT, AND COMMUNICATE HOW ONE CAN MOVE THROUGH A PROPERTY.

Q3

ANS- KITCHEN PLAN - https://drive.google.com/file/d/1samOHoLF642tj7DlHynJAv9oawUre07_/view?usp=sharing

PROCEDURE-

1. INTIALLY GO FOR START UP AND SET AUTOCAD WORK INTO IMPERICAL SCALE i,e - (INCHES AND FEETS) AND CHECKING ALL THE DESIGN DETTINGS.

2. USE LINE TOOL AND ENTER THE FIRST CO-ORDINATES ,
3. THAN PROCEED WITH SAME COMMAND TO NEXT POINT BY ADRESSING LIKE @( X, Y) COORDINATES OR @( DISTANCE < ANGLE).
4. FROM THE GIVEN DRAWING ,IDENTIFY THE POSSIBLE CO-ORDINATES , THAN USING ABOVE NO.2 STEP RPOCEED WITH LINE DRAWING.
5. IF LINE CONNECTED ARE EXCEEDING IN ITS LENGTH OR MISMATCH APPEARED THAN ,USE ERASE OR CLT + Z FOR UNDO THE WORK.
6. AFTER CONNECTING ALL COORDINATES AS SHOWN IN ABOVE PICTURE, USE ALIGN TOOL FOR MEASUREING DISTANCES FOR VERFICATION CO-ORDINATE DISTANCE.
7. USE TEXT TOOL FOR LABELLING THE POINT / CORNER OF DRAWING .
8. SIMPLY USE COPY TOOL FOR COPYING TEST PASTE AT CERTAIN LOCATIONS AND RELABELLING IT RESPECTIVELY .
9. WHILE USING LINE TOOL ,CHECK THAT LINE IS SELECT IN SINGLE LAYER FOR ENTIRE DRAWING.
10. AFTER COMPLETIION SAVE THE DRAWING WITH RESPECTIVE NAME IN dwg. FORMAT ONLY. AND UPON REOPENING SELECT THE SAME DRAWING AS READ ONLY

RESULT DISCUSSION-

CHOICE OF A LAYOUT IS A KEY PART OF DESIGNING A KITCHEN FLOOR PLAN WITH DIMENSIONS THAT FIT YOUR SQUARE FOOTAGE. THE FLOOR PLAN DETERMINES HOW YOU'LL MOVE THROUGH THE SPACE WHILE COOKING OR ENTERTAINING AND HOW WELL IT FUNCTIONS FOR DAY-TO-DAY ACTIVITIES. THE BEST LAYOUT WILL DEPEND ON THE SPACE AVAILABLE AND THE LEVEL OF WORKABILITY AND CONVENIENCE YOU DESIRE. IN GENERAL, THE PLACEMENT OF THE WORK TRIANGLE, BASED ON THE KITCHEN'S FLOORPLAN AND DIMENSIONS, DICTATES ITS EFFICIENCY. THE WORK TRIANGLE IS DEFINED BY THE LOCATIONS OF THE REFRIGERATOR, THE RANGE OR COOKTOP, AND THE SINK. A COMPACT TRIANGLE LIMITS THE DISTANCES BETWEEN THESE APPLIANCES USED EVERY DAY. WHEN CHOOSING THE SUITABLE KITCHEN LAYOUT FOR YOUR HOME, CONSIDER THE WORK TRIANGLE THAT WILL WORK BEST FOR YOU AND THE ROOM.

Q4 -

ANS- COLUMN DETAILING - https://drive.google.com/file/d/1SdqbuEsq0GyH8KIYMXsvxI04pJtnHssf/view?usp=sharing

PROCEDURE-

1. INTIALLY GO FOR START UP AND SET AUTOCAD WORK INTO IMPERICAL SCALE i,e - (INCHES AND FEETS) AND CHECKING ALL THE DESIGN DETTINGS.

2. USE LINE TOOL AND ENTER THE FIRST CO-ORDINATES ,
3. THAN PROCEED WITH SAME COMMAND TO NEXT POINT BY ADRESSING LIKE @( X, Y) COORDINATES OR @( DISTANCE < ANGLE).
4. FROM THE GIVEN DRAWING ,IDENTIFY THE POSSIBLE CO-ORDINATES , THAN USING ABOVE NO.2 STEP RPOCEED WITH LINE DRAWING.
5. IF LINE CONNECTED ARE EXCEEDING IN ITS LENGTH OR MISMATCH APPEARED THAN ,USE ERASE OR CLT + Z FOR UNDO THE WORK.
6. AFTER CONNECTING ALL COORDINATES AS SHOWN IN ABOVE PICTURE, USE ALIGN TOOL FOR MEASUREING DISTANCES FOR VERFICATION CO-ORDINATE DISTANCE.
7. USE TEXT TOOL FOR LABELLING THE POINT / CORNER OF DRAWING .
8. SIMPLY USE COPY TOOL FOR COPYING TEST PASTE AT CERTAIN LOCATIONS AND RELABELLING IT RESPECTIVELY .
9. WHILE USING LINE TOOL ,CHECK THAT LINE IS SELECT IN SINGLE LAYER FOR ENTIRE DRAWING.
10. AFTER COMPLETIION SAVE THE DRAWING WITH RESPECTIVE NAME IN dwg. FORMAT ONLY. AND UPON REOPENING SELECT THE SAME DRAWING AS READ ONLY

RESULT DISCUSSION-

COULMN DETAILING IS REQUIRED TO SHOW CASE THE OREINTATION OF BARS AND CONCRETE GRADE TO BE USED FOR ACTUAL COLUMN. THUS, DETAILING MUST BE CRYSTAL CLEAR AND GIVE PROPER COMMUNICATION FOR ANY ONE ON SITE TO UNDERSTAND IT AND EXECUTE IN ACCORDANCE THE SAME. DETAILING DRAWING EVEN HELPFULL FOR ESTIMATING THE MATERIAL QUANTITY AND COSTING FOR WORK CAN BE KNOWN.

Q5-

ANS- COLUMN LAYOUT - https://drive.google.com/file/d/1ZVlc01Hn7Pe2X_itzFJSEV56_9WHHNlw/view?usp=sharing

PROCEDURE-

1. AT FIRST, CHOOSE THE COLUMN SHAPE. DIFFERENT TYPES OF COLUMN SHAPES USED IN DIFFERENT STRUCTURES; SUCH AS CIRCULAR, RECTANGULAR, BOX-TYPE COLUMNS. SO, IT IS NECESSARY TO CHOOSE THE COLUMN SHAPE FIRST.
2. AFTER FIXED THE COLUMN SHAPE THE 2ND STEP TO DRAW THE COLUMN. DRAW THE COLUMN BY USING A RECTANGLE (REC+ENTER) OR CIRCLE(C+ENTER) COMMAND.
3. THE COLUMN POSITION IS THE MOST IMPORTANT PART OF A STRUCTURE. THE BEAUTY OF A STRUCTURE IS DEPENDING ON THE POSITION OF THE COLUMN. SO, PLACED ALL COLUMN IN THE RIGHT POSITION.
4. GRIDLINE IS A VERY IMPORTANT PART OF A STRUCTURE BECAUSE THE POSITION OF ALL PARTS OF THE STRUCTURE IS SET ON THE BASIS OF THE GRID LINE. DRAW THE GRID LINE (HORIZONTAL & VERTICAL) BY USING LINE (L+ENTER) OR CONSTRUCTION LINE (XL+ENTER) COMMAND.
5. SET A DIMENSION OF ALL COLUMN RESPECT TO THE GRID LINE BY USING DIM LEANER (DIML+ENTER) COMMAND. BECAUSE WITHOUT DIMENSION IT’S IMPOSSIBLE TO LOCATE A COLUMN POSITION.
6. INTIALLY GO FOR START UP AND SET AUTOCAD WORK INTO IMPERICAL SCALE i,e - (INCHES AND FEETS) AND CHECKING ALL THE DESIGN DETTINGS.
7. USE LINE TOOL AND ENTER THE FIRST CO-ORDINATES ,
8. THAN PROCEED WITH SAME COMMAND TO NEXT POINT BY ADRESSING LIKE @( X, Y) COORDINATES OR @( DISTANCE < ANGLE).
9. FROM THE GIVEN DRAWING ,IDENTIFY THE POSSIBLE CO-ORDINATES , THAN USING ABOVE NO.2 STEP RPOCEED WITH LINE DRAWING.
10. IF LINE CONNECTED ARE EXCEEDING IN ITS LENGTH OR MISMATCH APPEARED THAN ,USE ERASE OR CLT + Z FOR UNDO THE WORK.
11. AFTER CONNECTING ALL COORDINATES AS SHOWN IN ABOVE PICTURE, USE ALIGN TOOL FOR MEASUREING DISTANCES FOR VERFICATION CO-ORDINATE DISTANCE.
12. USE TEXT TOOL FOR LABELLING THE POINT / CORNER OF DRAWING .
13. SIMPLY USE COPY TOOL FOR COPYING TEST PASTE AT CERTAIN LOCATIONS AND RELABELLING IT RESPECTIVELY .
14. WHILE USING LINE TOOL ,CHECK THAT LINE IS SELECT IN SINGLE LAYER FOR ENTIRE DRAWING.
15. AFTER COMPLETIION SAVE THE DRAWING WITH RESPECTIVE NAME IN dwg. FORMAT ONLY. AND UPON REOPENING SELECT THE SAME DRAWING AS READ ONLY

RESULT DISCUSSION-

A RAFT OR MAT FOUNDATION IS A SIZABLE CONCRETE SLAB OR SLAB-AND-BEAM SYSTEM WHICH SUPPORTS ALL THE LOADS OF SUPERSTRUCTURE THROUGH WALLS OR COLUMNS IN TWO OR MORE ROWS AND RESTS ON SOIL LAYER OR ROCK. RAFT FOUNDATION IS CLASSIFIED AS A SHALLOW FOUNDATION SINCE ITS DEPTH IS CONSIDERABLY SMALLER THAN DEEP FOUNDATION, BUT ITS DEPTH IS GREATER THAN OTHER TYPES OF SHALLOW FOUNDATION. IT IS USEFUL IN CONTROLLING THE DIFFERENTIAL SETTLEMENT AND TRANSFERRING THE LOADS NOT EXCEEDING THE BEARING CAPACITY OF THE SOIL DUE TO INTEGRAL ACTION OF THE RAFT FOUNDATION.