Q1. DESIGN SUMMARY REPORT (DSR) INTRODUCTION The Design Summary Report consists of necessary data and justifications for introducing the new road project. It also narrates the systematic approach of designing a project from the concept stage to the Final Design. ROADWAY DETAILS Name of the Roadway: Muscat Expressway Location:…

Q1. Workspaces and Worksets  Aim & Introduction. The Openroads Designer section depicts a detailed description of the software interface, settings, tools, modules, mocrostation models, references, workspace and feature definitions. It also explains the operational procedure and instructions for running the…

Q1. Create a terrain by various Methods. Aim and Introduction. Terrain creation is an important part of Openroads Designer, and it can be done by various methods depending on the data availability or sometimes it depends on the situation. Terrain can be created from a file, by ASCII, by Graphical Filter, by Text interpolation…

Week 3 Q 1.2 Terrain Creation by ASCII Aim & Introduction.  There are many methods available in ORD for the Terrain Creation and Terrain creation by ASCII is one of the easiest methods if right data is available. Together with ASCII method and filters, terrain can be created more accurately. Procedure The method…

Q1. Creating Horizontal Geometry. Aim & Introduction There are various methods to draw horizontal geometry in ORD and the different tools are explained in this section. Also, the procedure for the same is explained below. Procedure Open ORD=> Training & Examples=> Training Imperial Browse 2D seed file=>…

Q1. Microstation rectangle to complex line with matchline FD Aim& Introduction The aim of the assignment is to convert a microstation line into a complex line with Civil Rules and ORD has the functions to do this conversions in most simple way which will be discussed below. Procedure The step by step procedure for…

Q1. Create profile model for innermost shape Aim & Introduction. The aim of the section is to design a vertical profile with ORD. Procedure. Procedure for creating the profile model will be discussed below. Open ORD => T&E and TI Browse the horizontal alignment C/L file from the previous work=> go to Vertical=>…

Aim & Introduction ORD has diverse range of tools to create the existing conditions and future designs. This context will discuss the scenario of road rehabilitation by adding a turn lane. Procedure The procedure for crating the existing condition and proposed design will be discussed in detail below. Open ORD=>T&E=>TI…

Q1. Copy T-intersection civil cell DGNLIB Aim & Introduction Civil cells templates are used in order to connect the proposed road to match the existing junctions or to create special tie-in conditions with existing ground.  Procedure. A detailed explanation of civil cell copy template has been detailed below.…

1. Create alignment plans in sheets. Aim & Introduction Drawing sheet production is part of the ORD documentation setup where all the drawings are to be produced in standard manner. Procedure The procedure for creating the plans in sheets will be described below in detail. Open ORD=>TE=>TI Open a new file=>browse…

Q1.Design the mainline alignment. Aim & Introduction The design concept for the mainline alignment can be developed by ORD with minimum requirement such as survey data, proposed right of etc. Procedure  The procedure for developing the mainline alignment will be explained below. The procedure for creating the…

Q1.Design the mainline alignment and all intersecting streets. Aim & Introduction The design concept for the mainline alignment can be developed by ORD with minimum requirement such as survey data, proposed right of etc. Procedure  The procedure for developing the mainline alignment will be explained below. The…