Screenshots of the Draft analysis report: Screenshots of the model with the proper color code of the draft angle in various orientations Expanded Tree:   REPORT: As we know, no part can be ejected from the tool if having 90-degree profile. So, we provide some draft angles to make it easier to come out from the tool.…

  Screenshots of the Draft analysis report for both the given Class-A surface:   CLOSED SURFACE: FINAL COMPONENT: CLASS-B       CLASS C:       EXPANDED TREE:            As we know, no part can be ejected from the tool if having a 90-degree profile. So,…

          REPORT: In this component, we decided to try a new approach for the tooling axis and bisecting line. Here, We have inserted the axis system, and Z-direction will be our tooling axis direction. For the ZY direction, we have taken the intersection of the switch bezel along the ZY direction.…

       Report: For the tooling axis, we can draw a line directly at the center and use it as a tooling axis. Here, I have drawn the centerline, and with the help of this, I have drawn the bisecting line.  

All the CATpart/PPT file has been attached in the attachment. All views of the part also have been attached in the ppt.  

REPORT: In this component, we decided to try a new approach for the tooling axis and bisecting line. Here, We have inserted the axis system, and Z-direction will be our tooling axis direction. For the ZY direction, we have taken the intersection of the switch bezel along the ZY direction. With the help of line command,…

DRAFT ANALYSIS.   RIB CREATION: EXPANDED TREE. ISO CONSTRAINED SKETCH:   REPORT: The base of the coin holder was extracted and on that surface, a point was created. Using this point a line was inserted along Y-axis. This line is our tooling axis. Using this tooling axis a draft analysis was performed. With 2.9…

Screenshots of the completed design in various orientations (Isometric, Front, Side, and Top View) Here, in the above pic the dog house body was created in hybrid mode due to software defaults. So, I have copied the children of the dog house and copied to a new body set with the link option.   EXPANDED TREE:  …

    Report: Tooling axis: A point was created on the door applique then using the line command line was inserted normal to the point in both the direction.  Heat stakes and 4-way/2-way locators are created to fix the door applique degree of freedom. 4-way and 2-way locators have the dimension of 15…

1. 3.  Mr. D.S. Pughazhyendhii is a family man who lives in Bangalore and travels to Madurai once a month which is 500 km from Bangalore. And have a total of 5 members in his family including him. And he is fond of big cars. Here, I'll be comparing 4 cars.   Bench-Marking:  Models TATA Punch (Creative IRA) TATA Nexon (XM)…

What is an under-body coating? Underbody coating is a thick covering (usually composed of rubber) that is applied consistently to the underneath of a vehicle. When the car is brand new and clean, it is frequently sprayed or painted on. However, if the undercoating is applied after a couple of years, it is okay. This is…