Saktheesh Subin R.J
Creative Engineer.
Skills Acquired at Skill-Lync :
- NX-CAD
- SHEET-METAL-DESIGN
- BIW-DESIGN
Introduction
15 Projects
Week 8 - Challenge 1 - Draft Analysis on a Fan Cover
RECUIREMENT OF DRAFT ANGLE The draft allow the part to release or eject from the mold.The draft angle is to reduce the friction between the core ,part and cavity.And its also for avoid the damage of the core,part and cavity.The minimum draft angle is 0.5 and commonly using draft angle is 3. REPORT: Tooling Axis Creation…
15 Mar 2021 05:18 AM IST
Week 8 - Challenge 2 - Base Bracket Design
REPORT Tooling Axis The dummy tooling axis is created to creat the main tooling axis.Take the intersection of the bracket body and make the lines in the deficult area in the bracket.Then Bisect the lines to create the tooling axis. Draft Analysis The draft analysis is to identify…
15 Mar 2021 10:25 AM IST
Week 8 - Challenge 3 - Switch Bezel Design
REPORT TOOLING AXIS The tooling axis is created by using the bisection method.The intersecption is taken in y direction and created two the lines in the inclinde area of the part.By bisecting that two lines the tooling clearing y direction is created.Then intersecption is taken…
16 Mar 2021 11:46 AM IST
Door Arm Rest Week 8 Challenge
SCREENSHOTS
18 Mar 2021 01:50 PM IST
Week 8 - Challenge 4 - Coin Holder Design
REPORT: In the given class A surface, all the walls are without draft angle and its in 90 deg angle. Deficult to manifacture this part and improve the class A surface to reduce the deficulties. The tooling axis is created in the center of the base surface. SCREENSHOTS: END
20 Mar 2021 05:05 AM IST
Week 8 - Challenge 5 - Core & Cavity Design
REPORT: Tooling Axis Creation Created a dummy axis before creating the tooling axis.The y direction intersection of body is taken for creat the tooling clearing in y axis direction.Create the line in the difficult area in this switch bezel there is two inclinde lines is created.Then…
22 Mar 2021 06:21 AM IST
Week 9 - Attachment Feature Creation - Challenge 1
REPORT: In the given class A surface, the walls are not drafted .The wall is perpenticular from the base.So the toolling axis is created in the center of the base surface. SCREENSHOTS:
24 Mar 2021 11:39 AM IST
Week 9 - Attachment Feature Creation - Challenge 2
REPORT: In the given class A surface, the walls are not drafted .The wall is perpenticular from the base.So the toolling axis is created in the center of the base surface. SCREENSHOTS:
24 Mar 2021 11:46 AM IST
Week 9 - Project 1 - Door Applique Design with Engineering Features
REPORT The tooling axis is craeted in the center of the given class A surface by using the point on surface.The first draft analysis show the given Class A surface is drafted in 3 deg.The second draft analysis is taken for the solid applique surface and its also properly drafted in 3 deg .The third analysis shows…
09 Apr 2021 12:31 PM IST
Week 9 - Project - Master Section Development
PPT File is attached as zip folder.
16 Apr 2021 11:20 AM IST
Week 11- Assembly Workbench
FILES ARE GIVEN BELOW
26 Oct 2021 05:10 AM IST
Benchmarking
REPORT COMPARISON OF 4 CARS TO SUGGEST A CAR …
11 Jun 2022 10:54 AM IST
Hood design-Week 2
REPORT HOOD ASSEMBLY …
30 Jun 2022 09:14 AM IST
Roof challenge
REPORT ROOF An automobile roof or car top is the portion of an automobile that sits above the passenger compartment, protecting the vehicle occupants from sun, wind, rain, and other external elements.The components present in the car roof…
10 Aug 2022 02:48 PM IST
1 Course Certificates
Academic Qualification
B.E
Ponjesly College of Engineering
05 Aug 2016 - 05 Dec 2020
12th
Janet Matriculation School
02 Jul 2015 - 02 Jun 2016
10th
Janet Matriculation School
03 Jun 2013 - 20 Apr 2014
Here are the courses that I have enrolled
Similar Profiles
Ladder of success cannot be climbed with hands in pocket.
The Future in Motion
Give more than what you get you will get more than what you gave
Avid learner