REPORT WEEK2   TASK1   AIM Make a Simulink Model of Doorbell using solenoid block.   OBJECTIVES To make Simulink Model of Doorbell using solenoid block. Create a situation where switch is closed for 2 seconds and also observe movement of plunger.   THEROY Structure of Doorbell:      …

REPORT WEEK04   TASK1   AIM Implement control logic of a “washing machine”.   OBJECTIVES To Implement control logic of a “washing machine” using Stateflow as per given sequence:  1) If the power supply is available, the system gets activated. 2) If the Water supply is not available,…

 REPORT MODULE01   TASK01   AIM Carry out a system-level simulation of an all-terrain vehicle (ATV).    OBJECTIVES 1) To download the ATV model from the given link. 2) To carry out a system-level simulation of an all-terrain vehicle. 3) To prepare a technical report explaining the model properties…

REPORT FINALM02   AIM In a laboratory experiment, data of voltage and current has been recorded and the same is attached in an excel file ( VI.xlsx ). Read the excel file in the Matlab program and perform the interpolation in the range of -17.3:0.1:0.9.  Generate the interactive plot for the interpolated…

REPORT PROJECT01 M03   AIM 1) In this project, interfaces for mathematical Set Theory are implemented using C programming language. 2) User can give the input like two list of data and this program will give  the output as the union and intersection of these two lists. 3) Creating two list of data using…

REPORT PROJECT02     TITLE Implement the Code for controlling the retraction and extension of Airplane’s landing gear.     AIM Overview of the Project: (5 to 6 lines): In this project, controlling the retraction and extension of Airplane’s landing gear can be implemented using Finite State…

Overview of the Project: Implement a system on the simulator for controlling a DC motor using L293 motor driver, monitor its status and print the running status of motor on the LCD Display. Goals: Implement a system on simulator for Controlling the DC motor using L293 motor driver.Displaying the running status of DC motor…

Overview of the Project:    In this project, the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (HC-SR04)   Goals:   Measuring the distance of an object using Ultrasonic Distance Sensor (HC-SR04) Usage of Input Capture Mode Key Highlights of the Project: …

Overview of the Project: In this project implementing the Code for “Interfacing a 16*2 LCD with two Arduino’s (one for Master and one for Slave) using Inter-Integrated Circuit (I2C) communication protocol” by sending the message to LCD using I2C communication protocol and display the message on LCD screen.…

Overview of the Project: In this project the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (28015 Ping) and also smoothen the sensor data using moving average filter”. Goals: Measuring the distance in terms of inches of an object using Ultrasonic Distance Sensor…

REPORT PROJECT01     Write a Test plan to test features of a new mobile phone (Blackbox test) that needs to be implemented based on the following requirements. (The product is still under development stage and is yet to be UA (User Acceptance ) tested .Every other thing to be included in the test plan can be hypothetical.…

REPORT PROJECT02         1) Perform Static Code Review Analysis for “C:\**\LDRA_workarea\Examples\C_Testbed_examples\Testrain\Testrain.c” Generate Code review report and upload them.     2) Perform Integration testing by including all the .C files available in the folder location C:\**\LDRA_workarea\Examples\Toolsuite\Cashregister_6.0\…