Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s. Then rinsing…

 Use a thermistor to sense the temperature of a heater & turn on or turn off the fan as per the below conditions: https://1drv.ms/u/s!AqbpDVcFOhawhkgqv8xr-iQjStXv?e=Vi83hZ in these model I used following blocks  Repeating sequence stairs(defined in image) where I give a signal from 293K to 300K as temperature.…

Aim: - Carry out a system-level simulation of an all-terrain vehicle. Objectives: - Prepare a technical report explaining the model properties & comments on the results. An all-terrain vehicle (ATV), also known as a light utility vehicle (LUV) a quad bike, or simply a quad, as defined by the American…

  1.For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations. Ans: - Initial cargo mass is 136 kg  and therefore total weight of vehicle is 1144 Kg Now as cargo mass incresed tp 500Kg from 136 Kg than…

What is the difference between mapped and dynamic model of engine, motor and generator? How can you change model type?  Mapped model:- Model uses a set of steady-state lookup tables to characterize performance. Dynamic model:- Work on actual data or real time data. Mapped Ci Mapped Engine Si Mapped Engine Model…

 Q 1. Which types of power converter circuits are employed in electric and hybrid electric vehicle?   ANSWER: - A power converter is an electrical circuit that changes the electric energy from one form into the desired form optimized for the specific load. A converter may do one or more functions and give…

1. A. Explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’.     B. Comment on the armature current shoot-up from the scope results.     C. Refer to the help section of ‘The Four-Quadrant Chopper DC Drive (DC7) block’. Compare it with the H-bridge…

For a defined driving cycle, calculate the energy required for braking. Answer: - consider drive cycle as below where we are applying brake for 2 times  at diffrent speed and for different time.  Braking power = 0.5*m*v^2 let mass of the vehicle is 1000 Kg 14.99 mps to 0 in 5 sec  hence power required is…

Part A: 1. Search and list out the total weight of various types of aircrafts.  An aircraft is a vehicle or machine that is able to fly by gaining support from the air. It counters the force of gravity by using either static lifts  or by using the dynamic lifts of an airfoils, or in a few cases…

Create a MATLAB model of electric car which uses a battery and a DC motor. Choose suitable blocks from Powertrain block set. Prepare a report about your model including following: Objectives:         1. System level configurations        2. Model parameters      …

1.controlling the retraction and extension of Airplane’s landing gear can be implemented using Finite State Machine (FSM).  Goals Controlling the direction of Valve. Controlling the retraction and extension of Airplane’s landing gear. Direction valve is use to control the hydrullic pressure requiered for the raising or…

1. Creation of user defined data type to implement the user interfaces for working with ‘Set’ A linked list is a linear data structure, in which the elements are not stored at contiguous memory locations. The elements in a linked list are linked using pointers. A Data Item (we can store integer, strings, or any type of…

LIVE BATCH Q1.Implement a system on the simulator for controlling a DC motor using L293 motor driver, monitor its status and print the running status of motor on the LCD Display. Goals: Implement a system on simulator for Controlling the DC motor using L293 motor driver. Displaying the running status of DC motor on the…

Q.1 In this project, the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (HC-SR04) Goals: Measuring the distance of an object using Ultrasonic Distance Sensor (HC-SR04). Usage of Input Capture Mode. Key Highlights of the Project:  Measuring the distance travelled…

                                                                          LIVE BATCH [PREETI MAM]     Perform Static Code Review…

                                                                LIVE BATCH [PREETI MAM]   Test Plan: - It is detailed document that provides infomation about…