1.Calculate the Concrete Mix Design for M35 grade concrete with fly ash & M50 grade concrete without Fly ash      AIM: To Calculate the Concrete Mix Design for M35 grade concrete with fly ash & M50 grade concrete without Fly ash.      INTRODUCTION:    Mix Design…

Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding loads from the members…

Aim:        To design and draft the layout of a residential building of plot size 60' x 20' (18.3m x 6m) facing east.       Develop architectural drawings such as floor plan, elevations, sections and develop structural drawings such as column, beam, footing.   Introduction:…

1. Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating the title block you need to save it as a block with names: Custom1_titleblock and Custom2_titleblock, respectively.…

1. Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards. AIM: To create the kitchen layout and to also, use proper dimension techniques to dimension the…

1. Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Use the MV command to create the viewport of the size shown in Figure. Also, use ATTEDIT command to edit the information in the title block. Use A1 size for the layout. Take…

1. Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing.   AIM:       Create a 3D furniture element as shown in the figure.   INTRODUCTION:       Create the profile by using command tools are Relative rectangular coordinate system   Region …

1. Create a 3D Isometric View of the building with plan and elevation given. Aim: To Draw the 3D Isometric view of the building as shown in figure   Introduction: A plan view of wall two elevation of windows on both sides are given and they are to be converted into a 3D model   The height of floor is given as…

Create a 3-dimensional model of the residential building with a rendered view.   Aim: To Create a 2D residential building with a rendered view in AUTO CAD   Introduction: A 3D model can even be presentation of any surface of an object in three dimensions by using special software called 3D modeling.   3D…

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level Aim: Model a ceiling from the architecture tab above the walls at the first-floor level.   Procedure: Open the week 3 project and now we have to create a…

1) Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School Aim: To Select the type of structure, want to Modelling using Revit. Procedure: Schools' buildings…

1) Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve. Aim: - Create a set of sinusoidal points using Dynamo   Create a curve   Create a surface out of the curve. Procedure: - Open Architectural Template in Revit software   Select manage tab   …

1) Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class   Aim: Using the Architecture and Structural project file week 6 to 8. To export the model to Navisworks cache file.…