We download the file VI.xlsx from the question. We substitute the values of VI.xlsx to z and store first column and then second column values of VI file to volt and current variables. >> z = xlsread('VI.xlsx');>> volt = z(:,1); >> current = z(:,2); We create a given range of -17.3:0.1:0.9…

HOOD MODEL [ANSA]   AIM: For the given Hood model, Take the mid surface for all the components after checking the geometrical errors. Mesh the mid surface with the given element Quality criteria. SI NO. Quality Criteria Value 1 Target/Average length 5 2 Minimum Length 2 3 Maximum Length 7 4 Aspect 3 5 Warpage 15 6 Skewness…

                                                                  BOTTLE CAP MODEL [ANSA]   AIM: To extract the mid surface Mesh the bottle cap component…

AIM : Tool test carries two models (i.e. Plastic model, Sheet metal model). For both the models, Mid surface should be taken and meshed as per below quality criteria. Thickness should be assigned to both the models. Quality Criteria :    S.No  Quality Criteria  Value  1 Target/Average length  …

AIM: Check for the geometrical errors and mesh the Surfaces with the given 2D element Quality criteria’s given below for given REAR VIEW MIRROR. Use tetra elements to mesh the Volumes defined in the model and check for the below quality after Volume meshing.   SI. No.  Quality Criteria  Value …

AIM : For the given Intake Manifold component Check for the geometrical errors Mesh the Surfaces with the given 2D element Quality criterias given below.  S.No  Quality Criteria  Value  1 Target/Average length   3 2 Minimum Length  1 3 Maximum Length  5 Use tetra elements to mesh…

Aim: To perform the connections of the rear door of the car with different connection techniques.   PROCEDURE:- Extract the file (Rear door) to ANSA. Set seperate PID's for different spot welding parts. FOR HOLES : Use Bolt type Connections. For this type of connection, give a COG points to the holes that need to…

AIM: 1) Practice all the Morphing techniques that were shown in the video for Model-1. 2) Perform morphing for the Model-2 and Increase the Height of the Dog houses and Ribs. MORPHING : Morphing is the changing terminology or it is used to change the shape or design of the component without any numerical input. It is the…

AIM : For the given component, check for the geometrical errors and mesh with the given element Quality criteria. After meshing the component the thickness has to be assigned. S.No  Quality Criteria  Value  1 Target/Average length   4 2 Minimum Length  2 3 Maximum Length  6 4 Aspect …

AIM : For the given component, check for the geometrical errors and mesh with the given element Quality criteria. After meshing the component the thickness has to be assigned. S.No  Quality Criteria  Value  1 Target/Average length   4 2 Minimum Length  2 3 Maximum Length  6 4 Aspect  3 5 Warpage 15 6 Skewness 45 7 Jacobian …

OBJECTIVE : To mesh the given rear suspension model in both 2D and 3D (according to the given quality criteria) after checking for and clearing geometrical errors. Also, to deploy appropriate connections as required between various parts of the assembly after which the model is symmetrically replicated using the reflect…

AIM: To create 1D elements on the given component with given cross-section and DOF using Hypermesh SPECIFICATION: a. Rod element:- with only translational DOF and RBE2 link Cross-Section: BOX- Dimension a= 12 mm                              …

To import go to File Menu >> import >> geometry.Now choose ‘IGES’ as file type and open the model and click the import