UNDERBODY COATING :        Underbody coating is a one component PVC based product that is cold applied and heat cured.Developed for application on e-coated substrates it seals and prevents the entry of water corrosion and dust into the joints of car bodies  TYPES:          …

Benchmarking:                        Benchmarking is a process of measuring the performance of a company's products, services, or processes against those of another business considered to be the best in the industry.    In order to benchmark anything,…

Objective Design hood outer panel, inner panel and reinforcements with the given outer hood skin, master section and design parameters.   Introduction The hood or bonnet is the hinged cover over the engine of motor vehicles. Hoods can open to allow access to the engine compartment (or trunk on rear-engine and some mid-engine…

Objective;                Design hood outer panel, inner panel and reinforcements with the given outer hood skin, master section and design parameters.  Introduction;                       The hood or bonnet is the hinged…

    Report On Section Modulus Calculation Of Hood Aim        To calculate the section modulus of the previously designed hood for analyzing its strength and also optimizing the design to see the difference in the bending strength of the hood. Higher the section modulus of a…

Title of the project:                                  Fender design-Wheel Arch Challenge Objective:                               To calculate the wheel arch area…

Aim: The main aim is to design the fender model with the necessary mounts using the class-A surface. Mounts: Bumper A-Pillar Sill Cowl Drip Theory: Fender: A fender is a part of an automobile that frames a wheel well (Fender underside). Its primary purpose is to prevent sand, mud, rocks, liquids, and other road sprays…

                                     ROOF DESIGN   OBJECTIVE: For the Given Roof styling, develop the essential flanges  Creation of Roof ditch area with tool opening angle of 3 degree. Provide appropriate dimensions…

                            DESIGN OF BACKDOOR OBJECTIVE:            i) From the given styling surface, develop a back door using appropriate design methodologies.          ii) The objective of this…

OBJECTIVE: To create quick return mechanism and CV joint parts in part work bench or generative work bench and assemble them following all the guidelines. SOFTWARE USED: CATIA V5. INTRODUCTION: a) QUICK RETURN MECHANISM: A quick return mechanism is an apparatus to produce a reciprocating motion in which the time…

AIM: Create the Base Bracket Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model. Given Class A Surface: STEP 1: Check the connectivity…

   Aim       Create the Switch Bezel Plastic component through the given Class - A surface Design steps: Before making any plastic product surface design we need to create tooling axis and with the help of different surfaces we can create tooling axis and for tooling axis, Bisecting command is…

 AIM    Create the Bumper Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  Take the Thickness of the component to be 3…

AIM: To Create the Door Handle Component from the given Class-A surface. To Create the tooling axis for the given Class-A Surface meeting the requirements of the draft angle. To Attach B side Features in the component. To perform the Draft analysis on the model.  TOOLS USED: Boundary Join Multiple extract Bisecting…

Attachment Feature Creation - Challenge 2 AIM Create the Dog House for the Door Trim considering the design rules INTRODUCTION DOG HOUSE Dog house is an engineering feature used in plastic design. Dog houses are used as support feature. Sometimes other engineering features like snaps, locators, and screw bosses are mounted…

AIM: Create the Door Trim Lower Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  Create the Heat Stakes and the locators…

AIM : To create the A pillar Design with Master Section and using through the given Class-A surface. Also create the engineeing features as Dog house. Objective To create a tooling direction. To perform draft analysis for given A-Surface and prepare the final close body. To design the A pillar plastic component by creating…

FINAL PROJECT                                                                                                            DOOR TRIM DEVELOPMENT  INPUTS: CLASS A surfaces of the DOOR ARM REST, MAP POCKET, BOTTLE HOLDER and LOWER SUBSTRATE. Master section for the attachment features. Push clips for the assembly. OBJECTIVES:…