Title of the project: Advanced Sheet Metal Design using NX-CAD Challenge 1:Casing Design Objective: To design the casing using sheet-metal operations in NX-CAD. Introduction: A Casing is a protective covering over a mechanical part or a system to prevent any physical damage that can hamper the performance of the components…

Title: ADVANCED SHEET METAL NX-CAD DESIGN OF A BOX ASSEMBLY- CHALLENGE 2 Objective: To design a box assembly using sheet-metal operations in NX-CAD. Introduction: In this project a box assembly was designed from the scratch following the basic principles and tools to perform sheet metal operations in NX 12.0. The material…

Title: ADVANCED SHEET METAL NX-CAD DESIGN OF AN ODD SHAPED ENCLOSURE- CHALLENGE 5 Objective: To design an odd-shaped enclosure using sheet-metal operations in NX-CAD. Introduction: In this project, an odd-shaped enclosure was designed from the scratch following the basic principles and tools to perform sheet metal…

Title: ADVANCED SHEET METAL NX-CAD DESIGN OF AN METAL BRACKET 2- CHALLENGE 7 Objective: To design a metal bracket using sheet-metal operations in NX-CAD. Introduction: In this project, a metal bracket was designed from the scratch following the basic principles and tools to perform sheet metal operations in NX 12.0.…

Title: ADVANCED SHEET METAL NX-CAD DESIGN OF AN METAL BRACKET - CHALLENGE 6 Objective: To design a metal bracket using sheet-metal operations in NX-CAD. Introduction: In this project, a metal bracket was designed from the scratch following the basic principles and tools to perform sheet metal operations in NX 12.0.…

UNDERBODY COATING FOR CARS Underbody coating is a type of coatings for automobiles that protects the body from rust. The coating on the bottom of the car not only provides long term protection from rust to the body but also provides protection to the parts inside the car. This coating process protects the body from environmental…

Challenge 1: Benchmarking  To respond to such questions following considerations need to be taken into account: 1)The city of Bangalore is not so commuter-friendly due to to its heavy traffic. 2)The car the owner buys the car for five people. 3)The car needs to have good mileage with comfortable seating. 4)Budget-friendly.…

CHALLENGE 3-HOOD DESIGN Introduction: A hood is an opening panel that protects the engine and other important parts in a car. The Hard material outside and the impact absorbents protect the passengers in the vehicle. The shape of the hood also plays a key role. It is designed to be aerodynamic and offers very less drag.…

Challenge 5: Fender Design Objective: To design a fender with the help of a master section and create mounting areas that will help to fix It to the body of the vehicle. Introduction: A fender is a part in the automobile that is usually placed above the wheels and below the hood. A fender connects to the hood through the…

Challenge 7: Roof Design Introduction: A roof is an important part of a car's BIW. The roof protects the passengers from a lot of conditions and they are designed based on these criteria. A roof typically consists of a front roof rail and a rear roof rail if the vehicle is small and compact. The stability of the roof is…

                                                     Design and Development of a Tail Gate Using NX-CAD Introduction: A back door or a tailgate is the rearmost part of the vehicle that…

                                             Optimization of Section Modulus of the Hood Objective: In this project, the hood designed earlier is taken into consideration and the section modulus of the Assembly…