Report A detailed report should be done explaining the draft analysis and the tooling axis creation.  An explanation should be given on the way of creating the tooling axis particularly the Bisecting method.    Before deisgn a mold we need ensure two things 1) tooling axis 2) draft analysis. For fan cover…

Draft Analysis green color indicates drafted walls above 3 deg. Red color indicates drafted walls from 0-3 deg. blue color indicates negative deg.   analysis shows  the drafted walls  of base bracket are above 3 degrees whic his permissible to manufacturing in injection molding. hence the base bracket satisfy…

core cavity design parting surface core design cavity design parting line   final job    

Door Applique Design with Engineering Features   draft analysis is performed on the door applique.   min  draft of 0.5 deg is mainatined on b side features. and tooling axis is created noramla to the a surfaes ac enclosed .    

1) QUICK RETURN MECHNISM ASSY   BODY 1 BODY 2 BODY 3 BODY 4 BODY 5 CV JOINT ASSY BODY 1 BODY 2 BODY 3    

    Kia Sonet   HTE 1.2 ₹ 8.61 Lakh On-Road Price, Bangalore   Tata Nexon   XE ₹ 9.22 Lakh On-Road Price, Bangalore     Maruti Suzuki Vitara Brezza   LXi ₹ 9.57 Lakh On-Road Price, Bangalore     Hyundai Venue   E 1.2 Petrol ₹ 9.20 Lakh On-Road Price, Bangalore  …

1)  What is underbody coating? Underbody coating is usually a dense cladding (often based on rubber) applied uniformly to the undercarriage of the automobile. It is normally sprayed or painted on when the car is just out of the dealership and is clean. But even if you are getting the undercoating applied after…

commend used to create hood trim sheet offset sheet law extension trim and extend offset curve  project curve wave link geometry edge blend  face blend sew thicken examine geomtry  

Aim : To Calculate the wheel arch radius for the given Fender model and check for its eligibility to pass the European Standards. Explanation : Wheel Arch is an arch shaped cavity in the fender body, which houses a wheel. The main intention for the calculation of wheel arc radius is to position the wheel inside…

Aim: The main aim is to design the fender model with the necessary mounts using the class-A surface. Mounts: Bumper A-Pillar Sill Cowl Drip   Theory: Fender: A fender is a part of an automobile that frames a wheel well (Fender underside). Its primary purpose is to prevent sand, mud, rocks, liquids, and other road…

SECTION MODULUS OF THE HOOD Objective: To find the section modulus of the hood and optimisation to improve the overall section modulus. Section Modulus: The section modulus (S) is geometric property of the cross section used for designing beams and flexural members. It does not represent anything physically. Formula…

  INTRODUCTION The roof of a car or other vehicle is the top part of it, which protects passengers or goods from the weather. The roof also protects the passenger from any injury when the car gets crashed or is rolled over or something heavy falls on the roof.   OBJECTIVE The mian objective…

AIM: To Design the outer upper and lower panel, inner panel with the necessary reinforcements by following the Master section with the design parameter for the given class A surface.  INTRODUCTION: A door is a hinged part which is used for entry and exit of the vehicles. Back doors are one of the type doors of the vehicle…

CASING  DESIGN USING NX Objective:  The ultimate aim of this project is to design casing by using NX-CAD software in a sheet metal environment and get familiar with the use of sheet metal features and tools available in NX-CAD. To get knowledge of how to apply these features and tools by using software thereby…

TITLE: SHEET METAL BOX ASSEMBLY DESIGN USING SIEMENS NX.   OBJECTIVE: Learn to design a sheet metal Box Assembly in industrial manner by using Siemens NX.   INTRODUCTION: Sheet metal parts are widely used in machinery, enclosure, brackets, and automobile due to its various advantages. The parts are normally manufactured…

Assemble and apply GD&T to the butterfly valve assembly drawing ASSEMBLED ALL BOTTERFLY VALVE BY INSETING ALL THE COMPONENTS AT A TIME INTO THE ASSEMBLY WORKBENCH USING FALLOWING ASSEMBLY CONSTARINS ASSEMBLED ALL THE PARTS TOUCH ALIGN (TOUCH) TOUCH ALIGN (INFER CENTER AXIS) APPLIED GD&T TO IT  

  Advanced Sheet Metal Design Using NX Cad Challenge 5 Odd Shaped Enclosure Title of the Project: Advanced Sheet Metal Design Using NX Cad Challenge 5 Odd Shaped Enclosure Objective: To design a Odd shaped Enclosure with the help of NX advance sheet metal. Introduction: Sheet metal is metal formed by an…

Tittle of the Project:- Advanced Sheet Metal Design Using NX CAD Challenge_6_Bracket.   Objective:- To design a Bracket by using Siemens NX12 Sheet metal application.   Introduction:-   SHEET METAL DESIGN:NX sheet metal Design provides the design professional with a complete set of tools to efficiently…

METAL BRACKET USING NX SHEET METAL APPLICATION: OBJECTIVE: This is a project to learn the step by step procedure to create a Bracket with a gusset from the given 2D drawing. INTRODUCTION: A bracket is an intermediate component for fixing one part to another. It is used to support the weight. Brackets vary widely in shape,…

What is BIW & define its parts? the stage in automotive design or automobile manufacturing in which car body sheet metal components are been assembled by welding and by other joining process. Biw parts are mainly categorized as below body sides under body  closures roof fender BODY SIDE consists of: Body…

What is the process of project execution activity? the process of activities to be followed  2 2 What are the types of joining processes?   JOINING PROCESSES ARE AS FALLOWS Arc welding the process involves either consumable or non consumable electrode (rod or wire) an arc produced between tip of the electrode…