Fender Design:   Design Considerations:   Drip area Sil Mount Bumper Mount A pillar Mount Baffle Mount   Functional Requirements: The function of the fender is to enclose the Engine compartment and prevent the exposure of engine to any foreign matter particles. The Fender is to be designed to the given skin…

Hood Design   Components in Hood Design:   The components in the Hood Assembly are as follows:   Hood inner panel Hood Outer panel Hinge sub assembly Latch and striker   Emboss in Hood:   Figure 1: Embosses in the Hood   The various embosses in the hood are shown in the above figure. These…

Design of Roof   Design considerations:   A roof has been designed using the given styling (outer panel) part. The major features of the roof are as follows:   Front Roof rail Rear Roof Rail Bow roofs Reinforcement center and Side flanges/ditch area.   The above listed components have been designed…

Section Modulus of Hood   Section modulus is the geometric property of a cross section of a part. It directly represents the strength of a part at the selected cross section It is the ratio of the area moment of inertia and the span from neutral axis to the farthest point of the part. Its unit is mm^3.   Formula:…

Wheel Arch Analysis     The aim of this analysis is to ensure that the fender design satisfies the standards set to protect the pedestrians and engine bay. According to the European Standards, 5 points in particular positions at the outer surface of the wheel should be at a minimum distance of 10mm from the inner…

Design of a Motorcycle Powertrain   Scope of the Project: To design a 5-speed manual gearbox for a motorcycle with constant mesh gears, dog shifting mechanism for gears engagement and apply Geometric Dimensioning and Tolerancing to the various components.   Design Parameters: The various components of the design…

CHAPTER-1 INTRODUCTION: Scope of the project: The scope of this project is the Design and Development of a Two Stage Constant Ratio Gearbox to run an All-Terrain Vehicle in SAEINDIA BAJA Endurance.     Figure 1.3 SAEINDIA BAJA Pithampur   SAE BAJA is an ATV Racing Competition, wherein Students from various…

Please Find attached files and a report in the form of word document.  

1-What is the difference between mapped and dynamic model of engine, motor and generator? How can you change the model type?   Ans:   Mapped Model: This model of a motor/engine/generator is based on pre-defined parameters and lookup tables. The parameters do not change with time. For example, The mapped motor…

Which types of power converter circuits are employed in an electric and hybrid electric vehicle?    The various types of power converters used in electric vehicles and Hybrid-electric vehicles are as follows: DC-DC converters AC-DC converters DC-AC converters   DC-DC converters: These converters are employed…