
Road and highway design courses online
Every Skill-Lync course on road and highway geometric design, Civil 3D and OpenRoads Designer, with fees, hours, projects and the design maths behind them.
- 4
- short courses
- ₹40,000
- per short course
- 9 to 27
- hours of video
- 32-week
- PG program
As of 21 Nov 2026 · Fees are the list price on each course page, inclusive of all charges
Skill-Lync teaches road and highway design in 4 online courses of 5 to 12 weeks: Fundamentals of Road Design, Geometric Design Fundamentals (with Civil 3D), Roadway Design with OpenRoads, and Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D, plus the 32-week Post Graduate Program in Infrastructure that bundles all four with traffic engineering and project management. Here they all are with fees, duration and projects, the design maths behind them, where they overlap, and which fits the job you want.
Every Skill-Lync course that teaches Road Design
| Course | Level | Duration | Projects | Fee |
|---|---|---|---|---|
| Fundamentals of Road Design | Short course | 5 weeks | 1 | ₹40,000 |
| Geometric Design Fundamentals | Short course | 7 weeks | 2 | ₹40,000 |
| Roadway Design with OpenRoads | Short course | 8 weeks | 3 | ₹40,000 |
| Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D | Short course | 12 weeks | 2 | ₹40,000 |
| Post Graduate Program in Infrastructure - Engineering Design and Project Management | PG program | 32 weeks | 12 | ₹2,75,000 · EMI from ₹14,375/mo |
Projects is the number of industry projects listed on the course page. Programs also include the courses' smaller assignments. EMI figures are the lowest monthly plan shown on the course page.
Which one should you pick?
- You are new to road design. Start with one of the two theory courses. Geometric Design Fundamentals (7 weeks, ₹40,000, 9 h, 2 projects) goes week by week through IRC geometric design: cross-section, sight distance, horizontal and vertical alignment, transition curves and hill roads, ending with a highway corridor in Civil 3D. Fundamentals of Road Design (5 weeks, 11 h, 1 project) covers less geometry but adds pavement design and earthwork; its project takes surveyor data through to corridor cross sections and quantities.
- Your target employers use Autodesk (Civil 3D). Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D (12 weeks, 25 h) is the full production workflow: concept in InfraWorks, then alignment, profile, corridor, intersections, pipe networks and ponds, plan sets and quantity estimates in Civil 3D. Projects: resurfacing 3.133 miles and reconstructing 1 mile of road in Florida.
- Your target employers use Bentley (OpenRoads). Roadway Design with OpenRoads (8 weeks, 27 h, 3 projects) has the most video of the four short courses: workspaces, terrain, geometry, corridors, superelevation, civil-cell intersections, quantities and plan production. Projects: a roadway geometry, a 3.0-mile roadway with crossing streets, and a road widening.
- You want roads plus project management in one program. The Post Graduate Program in Infrastructure (32 weeks, ₹2,75,000, EMI from ₹14,375 a month, 127 h, 12 projects) includes all four road courses above, plus traffic engineering, Construction Project Management Fundamentals and Project Management Using Primavera. The four road courses bought separately cost ₹1,60,000; the program adds the traffic and project management courses and the career services listed on its page (resume and mock interview help, interview opportunities through Skill-Lync's recruiter network).
- You only need scheduling. If you want Primavera P6 for planning and billing roles rather than design, the P6 courses and the construction programs are on the Primavera P6 hub; the road courses here will not help with that.
What is Road Design?
Road design (highway or roadway design) is fixing where a road goes and what shape it takes so vehicles can travel it safely at a chosen design speed. The designer starts from survey data (a terrain model, traffic counts and axle loads), fixes the horizontal alignment (straights, transition curves and circular curves, with superelevation on the bends), then the vertical profile (gradients joined by summit and valley curves), then the cross-section (carriageway, camber, shoulders, median, kerbs, side slopes) and the pavement layers. Software such as Autodesk Civil 3D and Bentley OpenRoads Designer turns those decisions into a 3D corridor model, cross sections every few metres, earthwork and material quantities, and the plan and profile drawings that go to the contractor. In India the geometric rules come from the Indian Roads Congress (IRC); US work follows AASHTO.
Almost every geometric rule starts from one number: stopping sight distance (SSD), how far ahead a driver must see to stop for an object on the road. It is the distance covered while the driver reacts plus the braking distance, v·t + v²/(2gf). The NPTEL notes from IIT Bombay quote the IRC values: a reaction time of 2.5 s and a longitudinal friction coefficient of 0.35 at speeds above 80 km/h. At a design speed of 100 km/h (27.8 m/s) the reaction distance is 69.4 m and the braking distance is 27.78² / (2 × 9.81 × 0.35) = 112.4 m, so SSD = 181.8 m, about 182 m. At 80 km/h it drops to 127.5 m. On a 3% downgrade gravity works against the brakes (f becomes 0.35 − 0.03) and SSD grows to 192.3 m.
Bends come next. A car on a curve needs a sideways acceleration of v²/R, supplied partly by tilting the road (superelevation e) and partly by tyre friction f. With IRC's maximum of 7% superelevation in plain terrain and f = 0.15, the ruling minimum radius at 100 km/h is v²/(g(e + f)) = 771.6 / (9.81 × 0.22) = 357.5 m, which the NPTEL worked answer rounds to 360 m. On a 360 m curve, superelevation for 75% of the design speed with no friction would be 0.123, more than the 7% cap, so e = 0.07 and friction must supply 0.148, just inside 0.15. On a gentler 1,000 m curve the same rule gives 4.4%. Between the straight and the 360 m curve goes a transition curve: IRC's comfort rate c = 80/(75 + V) = 0.457 is below its 0.5 floor, so c = 0.5 and Ls = v³/(cR) = 119.1 m. The other two checks are smaller: the empirical 2.7V²/R gives 75.0 m, and raising the outer edge at 1 in 150 (pavement rotated about the centre line, 7.0 m two-lane carriageway plus 0.65 m extra widening, assuming a 6.0 m wheelbase) needs 40.2 m. Adopt 120 m; the curve shifts inwards by Ls²/(24R) = 1.67 m.
Then the profile. Where a +3% grade meets a −2% grade (a deviation N of 0.05), the crest must be long enough for a driver whose eye is 1.2 m above the road to see a 0.15 m object one SSD away. For a parabolic summit curve longer than the sight distance, L = NS² / (2(√h₁ + √h₂)²) = 0.05 × 181.8² / 4.397 = 375.9 m at 100 km/h. That is 75.2 m of curve per 1% change of grade, the "K value" (K = L/A) that US design manuals such as TxDOT's, following AASHTO, use as the design control. At 80 km/h the same crest needs only 184.8 m: curve length goes with the square of the sight distance. These are first-cut checks; the software courses check alignments against design-speed standards inside Civil 3D and with civil rules in OpenRoads.
What a Road Design course covers
- Planning and survey data. Why and how roads are planned, the departments involved, topographic, traffic and axle-load survey data, design alternatives and design standards, and concept design from GIS and LiDAR data in InfraWorks.
- Geometric design. Road classification, design controls (speed, topography, design vehicle, traffic) as per IRC, cross-section elements (right of way, median, kerb, camber, shoulder, footpath, service road), sight distances, minimum radius, superelevation and how it is attained, transition curves, extra widening and setback distance, gradients, summit and valley curves, hill roads, and the IRC, AASHTO and UK DMRB standards.
- Pavement and earthwork. Fundamentals of rigid and flexible pavement design, annual traffic calculation, embankment slopes and earthwork volume calculations (in Fundamentals of Road Design).
- Civil 3D workflow. Points, surfaces and breaklines, alignments laid out over aerial images, existing conditions and terrain models for a reconstruction, profiles, assemblies and corridors, intersections, pipe networks and ponds, plan and profile and cross-section sheets with Sheet Set Manager, pay items, quantities and an Excel-linked cost estimate.
- OpenRoads Designer workflow. MicroStation basics and references, workspaces and feature definitions, terrain models, horizontal and vertical geometry with civil rules, templates and corridors, point controls, superelevation and curve widening, intersections with civil cells, quantity take-offs, earthwork from cross sections, and plan, profile and cross-section production with batch PDF plotting.
- Traffic engineering and project management (PG program only). Driver perception-reaction time, sight distances, traffic control devices, flow-speed-density, volume, speed and parking studies, level of service, intersection design and signal timing, then construction project management and scheduling in Primavera P6.
The courses in detail
Fundamentals of Road Design
Road design basics in five weeks: how roads are planned, topographic, traffic and axle survey data and design standards, horizontal design (tangents, spirals, curves, superelevation, extra widening), rigid and flexible pavement design with annual traffic calculation, and vertical design with SSD checks, cross sections, embankment slopes and earthwork volumes. Project: a road model from survey data through corridor cross sections to earthwork and material quantities.
Projects include: Designing a Road from Topographic Data.
Geometric Design Fundamentals
Highway geometric design week by week: road classification and alignment, design controls as per IRC, cross-section elements, sight distance, minimum radius, superelevation, transition curves, extra widening and setback, gradients and summit and valley curves (with hill roads), then IRC, AASHTO and DMRB standards and the software used. Projects: listing the geometric design parameters, then a national highway corridor with profile and cross sections in Civil 3D.
Projects include: Geometric Design Parameter; Lane National Highway Roadway Design in Civil 3D.
Tools: Civil 3D
Roadway Design with OpenRoads
Roadway design in Bentley OpenRoads Designer: design fundamentals and superelevation, MicroStation basics, workspaces and feature definitions, terrain models, horizontal and vertical geometry with civil rules, templates and corridors with superelevation and curve widening, intersections with civil cells, quantity take-offs and earthwork, and plan, profile and cross-section production. Projects: a roadway geometry, a 3.0-mile roadway with crossing streets, and a road widening.
Projects include: A 20-30 hr project on designing Roadway Geometry using Bentley OpenRoads Designer; A 40-50 hr project on designing a 3.0 Mile Roadway using Bentley OpenRoads Designer; A 10-20 hr project on designing roadway widening using Bentley OpenRoads Designer.
Tools: Bentley’s Openroads Designer
Designing a Roadway Project Using InfraWorks, Civil 3D, and Map 3D
A full roadway project in Autodesk software: concept design from GIS and LiDAR data in InfraWorks, then in Civil 3D project setup, alignments, existing-ground terrain models, profiles and superelevation, assemblies and corridors, intersections, pipe networks and ponds, plan sets with Sheet Set Manager, and quantities and cost estimates. Projects: resurfacing 3.133 miles and reconstructing 1 mile of road in Florida.
Projects include: Designing, Plotting, and Quantifying a Resurfacing Project; Designing, Plotting, and Quantifying a Reconstruction Project.
Tools: INFRAWORKS, CIVIL 3D, Map 3D
Post Graduate Program in Infrastructure - Engineering Design and Project Management
A 32-week program that contains all four road design courses (geometric design fundamentals, fundamentals of road design, Civil 3D with InfraWorks and Map 3D, and OpenRoads Designer), a traffic engineering course (traffic studies, level of service, intersections and signal timing), Construction Project Management Fundamentals and Project Management Using Primavera. Projects range from highway corridors to a metro tender and a bridge construction schedule.
Projects include: Designing, Plotting, and Quantifying a Resurfacing Project; Designing, Plotting, and Quantifying a Reconstruction Project; Geometric Design Parameter; Lane National Highway Roadway Design in Civil 3D.
Tools: INFRAWORKS, CIVIL 3D, Map 3D, Bentley’s Openroads Designer, Civil 3D, Primavera P6
Jobs after a Road Design course
Typical job titles: highway or roadway design engineer, road design CAD engineer or technician (Civil 3D or OpenRoads), transportation engineer, traffic engineer, pavement engineer, and quantity surveyor or estimator on road projects. Employers are highway design consultancies that prepare project reports and drawings for national and state road agencies, EPC contractors building roads and expressways, engineering services firms that work on overseas road projects, and GIS and mapping firms.
From Skill-Lync's own placement records (as of 21 Nov 2026, 3,905 placements): only 1 has a road or highway job title, a highway design engineer placed in 2022 from the PG Program in Infrastructure, which also has just 1 placement record. We cannot quote a salary median for road design from our own data. For context, Skill-Lync's civil placements overall (n = 367 with a salary, across all civil roles) have a median of 2.4 LPA, half of them between 2.4 and 3.5 LPA. Treat that as a starting point, not a road design rate. More: civil engineer salaries.
Free Road Design tutorials
Start here before you pay for anything. These are written by Skill-Lync learners and engineers:
- Basics of Road Design: An All-Inclusive Guide for the Learners
- NHAI High-Speed Corridor Guidelines: What Changes in Highway Design
- What You need To Know About Surveying In Civil Engineering!
- NHAI MLFF Guidelines: How Barrier-Free Toll Plazas Will Be Designed
- A Step-Wise Guide to Downloading Toposheets from the Survey of India Website
- How India's Infrastructure Boom is Creating Opportunities for Engineers
- AutoCAD Fillet Command for Civil Engineers: Options, Examples, Road Curves
Before you pay
The two theory courses overlap. Fundamentals of Road Design and Geometric Design Fundamentals both teach horizontal alignment, superelevation, sight distance and vertical design to IRC and AASHTO. One adds pavement and earthwork, the other cross-section elements, transition curves, hill roads and Civil 3D. Most learners need one, not both.
Little video in the theory courses. Fundamentals of Road Design has 11 hours over 5 weeks and Geometric Design Fundamentals 9 hours over 7 weeks, against 25 and 27 hours in the two software courses, at the same ₹40,000.
The software projects are American roads. The Civil 3D course designs roads in Florida with pay items and state-agency approvals, and the OpenRoads project is measured in miles. The software workflow transfers, but Indian projects use IRC standards and metric units, so practise one alignment to IRC values yourself.
No software licence is mentioned. None of the course pages says a Civil 3D, InfraWorks, Map 3D or OpenRoads licence is included. Check that you can get access before you enrol.
Not covered: bridges and culverts as structures, drainage hydrology beyond pipe networks and ponds in Civil 3D, and site supervision. For bridges see the bridge design hub.
Check the PG program's course list with a counsellor. Its page describes it as seven courses in one place and nine in another, and links six course pages; two pavement courses are listed without a syllabus. Road design placements are thin either way: 1 record.
Road Design course FAQs
What is the fee for a road design course at Skill-Lync?
As of 21 Nov 2026, each of the four road design short courses is ₹40,000, inclusive of all charges. The Post Graduate Program in Infrastructure, which contains all four plus traffic engineering, construction project management and Primavera, is ₹2,75,000, with EMI from ₹14,375 a month.
Which software is used for road design?
Skill-Lync teaches two: Autodesk Civil 3D (with InfraWorks for concept models and Map 3D for GIS data) and Bentley OpenRoads Designer. Both do the same job: terrain model, alignments, profiles, corridors, cross sections, quantities and plan sheets. Learn the one your target employers use; the geometric design theory underneath is identical.
What is stopping sight distance in highway design?
It is the distance a driver needs to see ahead to stop for an obstacle: reaction distance plus braking distance. With the IRC values of 2.5 s reaction time and friction 0.35, it is about 182 m at 100 km/h and 127.5 m at 80 km/h. Curve radii, crest lengths and setbacks are all sized from it.
Do I need IRC codes to work in road design in India?
Yes. Indian highway geometry is designed to Indian Roads Congress (IRC) standards, so design offices check every alignment against IRC values for sight distance, radius, superelevation and curve length. Geometric Design Fundamentals and Fundamentals of Road Design teach the IRC design values alongside AASHTO. The two software courses use American projects, so practise IRC values on your own alignment.
How long does it take to learn road design?
The short courses run 5 to 12 weeks each, with 9 to 27 hours of video; the PG Program in Infrastructure runs 32 weeks. A realistic path for a civil graduate is one theory course and one software course, then two or three complete corridors with quantities in a portfolio.
Is highway design a good career for civil engineers?
It is a steady design-office path, with work from road agencies, EPC contractors and engineering services firms doing overseas projects. Skill-Lync's own data is thin here: as of 21 Nov 2026 we hold 1 highway design placement record, so we cannot quote a road design salary. Check current openings for the software they ask for.