Week 10- Assembly Workbench

Report on under-body coating and its types   What is under-body coating and why is it done? Under-body coating is usually a black, thick liquid that is sprayed on the underside or undercarriage of the car and is used to protect the metal from rust and corrosion, which would rapidly chip ordinary paint and cause damage.…

BENCHMARKING Benchmarking is a practice of comparing business process and performance metrics to industry bests and best practices from other companies. Dimensions typically measured are quality, features, and cost. It is an act of rating one value by comparing it to a standard or point of reference. In business, and especially…

Design and development of a Door Trim panel   Aim  To design and develop a Door trim panel from the given Class A surface and follow the Master section provided. To create B-side attachment features by considering the design rules.   Objectives To create thickened part by referring the master section. To create the mounting…

QUICK RETURN MECHANISM:  Quick return is a common feature of tools in which the action is performed in only one direction of the stroke, such as shapers and powered saws. Because it allows less time to be spent on returning the tool to its initial position. DIFFERENT PARTS OF QUICK RETURN MECHANISM: 1. Slider bar…

MASTER SECTION DEVELOPMENT OF B-PILLAR Aim: To create the Class B and Class C surfaces for the given Class A surface, develop the B-Side features given in the Master section, and perform Draft analysis. B-Pillar: The vertical roof support structure is located between the front and rear doors of a car. It corresponds with…

OBJECTIVE: To create the Door Applique Plastic component through the given Class-A surface and the Heat Stakes and the locators considering the design rules. Also to find the tooling direction of the given Class-A surface.   TOOLING AXIS The tooling axis is found using the trial by error method. A line is drawn…

DRAFT ANALYSIS Draft analysis is a method used in design to check whether the component created in CAD is manufacturable based on the draft condition applied. The main reason behind the draft analysis is the part manufactured should be easily removed from the mold. It also gives an idea of the draft angle from the tooling…

DESIGN, ASSEMBLY, AND RENDERING OF SUNSEEKER PREDATOR YATCH   Objective To design the parts of Sunseeker predator Yatch and assemble them using SOLIDWORKS software.   To set proper image quality and getting realistic view with the help of photoview 360.   Introduction A yacht is a type of boats or power…

DRAFT ANALYSIS Draft analysis is a method used in design to check whether the component created in CAD is manufacturable based on the draft condition applied. The main reason behind the draft analysis is the part manufactured should be easily removed from the mold. It also gives an idea of the draft angle from the tooling…

In this challenge, we will be creating the Core, Cavity, Parting line, and Parting surface for the Switch bezel component modeled earlier. DRAFT ANALYSIS Draft analysis is a method used in design to check whether the component created in CAD is manufacturable based on the draft condition applied. The main reason behind…

In this challenge we will be doing draft analysis on COIN HOLDER using CATIA V5. DRAFT ANALYSIS Draft analysis is a method used in design to check whether the component created in CAD is manufacturable based on the draft condition applied. The main reason behind the draft analysis is the part manufactured should be easily…

In this challange we will be performing draft analysis on DOOR ARM REST using CATIA V5. DRAFT ANALYSIS Draft analysis is a method used in design to check whether the component created in CAD is manufactrable based on the draft condition applied. The main reason behind draft ananlysis is the part manufacted should easily…

In this challange we will be doing draft analysis on SWITCH BEZEL using CATIA V5. DRAFT ANANLYSIS Draft ananlysis is a method used in design to check whether the component created in CAD is manufactrable based on the draft condition applied. The main reason behind draft ananlysis is the part manufacted should easily removed…

In this challange we will be doing draft analysis on BASE BRACKET using CATIA V5 DRAFT ANANLYSIS Draft ananlysis is a method used in design to check whether the component created in CAD is manufactrable based on the draft condition applied. The main reason behind draft ananlysis is the part manufacted should easily removed…

In this challange we will be doing draft analysis on FAN COVER using CATIA V5 DRAFT ANANLYSIS Draft ananlysis is a method used in design to check whether the component created in CAD is manufactrable based on the draft condition applied. The main reason behind draft ananlysis is the part manufacted should easily removed…

REPORT ON MODELLING OF AMERICAN CHOPPER USING SOLIDWORKS    Objective To design the parts of American chopper and assemble them using SOLIDWORK software. To add decals, lights, camera and do rendering of the chopper by using SOLIDWORK visualization. To set proper image quality and getting realistic view with…