Hood design-Week 2

HOOD DESIGN:

1)FIRSTtake assembly model and add the innner panel and outer panel

2)second given the mastersection u have the read and understand

3)first take offset cuve in face 20

after trim sheet

after ofset the 4

after take offset curve in face 22

after offset curvein face 35

after take trim sheet and remove it.

after take the through curves and fill it

after take offset 25mm downwards

after take offset curve in face 50mm downwards

after take trim sheet and remove it

after take the through curves and fill it

after create emboss first create the sktech

take the projection curve and project it

take create the emboss

and create the sktech

and take project the curve

and offset the cuve 5 mm

and trim the trim the sheet

and the take mirror geometry mirrior it

after the take sew command and join it

after the create the tooling direction and create the radius

take the add the hinge and assemble the inner pannel and the add the striker

move the tooling directio

TAKE THE HOOD OUTER PANEL

and take the trim body

take the offset curve face 0.5

take the law extension

offset the lawexstesion 15mm

take the face blend the trim it

nad give the relefie the ends

and give the mirrior take the sew join them

final give the thicken