Challenge 3 HOOD DESIGN FRONT FENDER   (1) Drip area   (2) Bumper mount area   (3) Wheel arch area   (4) A pillar mount area   (5) Sill mount area   Drive link https://drive.google.com/drive/folders/1XD3Qwk-IDjHz8jZt5i3Ndvekd3VYIG84?usp=sharing

https://drive.google.com/drive/folders/1V6O3bivm_v-d8JzzGJkzeojioZGZealz?usp=sharing

https://drive.google.com/file/d/1bH62HS_LVdw43qPK_4cKV3qmTS48CJ9P/view?usp=sharing

CHALLENGE 1  Q1: UNDERBODY COATING AND ITS PURPOSE                                                                            …

Here is the link for my hood challenge use HoodAssembly.igs or HoodAssembly2.igs i have uploaded nx files catia and igs files if nx files give error use igs files  https://drive.google.com/drive/folders/13wdHyargRCxk7rnqasAy2Hcw8aPMpt4j?usp=sharing nx version NX 11 while opening in nx download all the files and open…

https://drive.google.com/file/d/1E2rW2CF4f3cVBFvwra3ceBIdOloY6Ug2/view?usp=sharing

  P-Clamp BackShell 10mm COT  Tube 12mm COT Tube 20mm COT Tube 35mm COT Tube 5mm COT Tube

1.Connector DT06-08SA Step-1 : Create Connector Connection Point Step-2: Create Bundle Entry Point Step-3: Create Axis system at connector connection point Y-Axis should be facing towards connector direction  X or Z-axis should be towards locking side Step-4: Define connector as electrical part Step-5: Define connector…

Step-1: Define Parameters                  1.Connector Connection point                 2.Bundle Entry point Step-2: Define all connectors as electrical component Step-3: Create Assemble Wiring Harness context product  Step-4: Add…

Challenge: Route the Wiring harness on Given Engine and Prepare flatten view drawing in CATIA V5 Aim: The Aim of the project is to route the wiring harness for the give engine and create flattening view of same by considering the harnessing rules and industry best practices like maintaining proper clearence between…

TAIL GATE WIRING  HARNESS Aim: To Route the Wiring harness on give backdoor and prepare flatten view drawing using catia v5 by consodering industry best practices and rules Step:1 Get the 3d data of the Back door Step:2 Decide ehich parts of the back door need electrical connection and prepare a list of components…

Aim: To flatten the given Harness assembly Step:1 Get the 3d Assembly Data Step:2 Check for Bundle Segment Connection Step:3 Create Flattening Product Define Parameters Step:4 Extract the Harness 3d data into flattening workbench and use flattening command to flatten the 3d data Step:5 Use rotate rotate tool to adjust…