1.AIM:To create a project using architectural template TOOLS REQUIRED: Click revit>new>project icon PROCEDURE: .In the new project dialog it shows a list of templates ,we need to select architectural template.  .click browse and navigate to the desired template and open it. .For creating new project ,click the…

1.BIM stands for "Building Information Modelling" what is BIM? BIM is a tool used for the planning, design, construction, and management of the building and other projects.It is a 3D modelling software. BIM classified into two types; -->:coordination. -->:computation. Coordination helps multiple people work together…

1.AIM:To draw ground floor plan and align it with grids. TOOLS REQUIRED: >Architecture tab >Floor >Properties tab >Grids >Edit property PROCEDURE: 1.Firstly,open revit and open the previous model of drawing. 2.Select the architectural tab. 3.Select the floor option from that choose Floor Architectural tab.…

AIM:To create a G+4 Residential building as per NBC by creating room tags and annotations and adding architectural components,camera view on each room,home appliances and making it a central model file. TOOLS REQUIRED: >Project file >architectural tab >grids >levels >columns >load family >properties…

1.AIM:To model a ceiling from architecture tab above the walls at first floor level. TOOLS REQUIRED: >Open >Architecture tab >walls >ceiling  PROCEDURE: 1.OPEN File in the revit. 2.select the project which is saved in 3rd week. 3.open architecture tab and click on the ceiling. 4.select the boundaries for…

1.A building code is a set of instructions that specify standards for constructed objects such as buildings and non building structures. the main purpose of building codes are to protect public health,safety and general welfare as they relate to the construction and occupancy of buildings and structures.the building code…

1.The objective the above question is to identify the type of failure based on the given pictures. a)Failure due to improper nominal cover develops large deformation of column/walls.If the size of nominal cover less than the diameter of the bar also this type of failure occurs.      b)Failure due to improper…

1.       The elements Ki2 in the first column, we determine the stiffness matrix by imposing u1=1 with u2=u3=0. The elements Ki2 in the secon column,we determine the stiffness matrix by imposing u2=1 with u1=u3=0. The elements Ki3 in the third column, we determine the stiffness matrix by imposing u3=1 with…

A five storey structure with 5 translational DOF is shown here. Each storey has mass ‘m’. The eigenvalue problem has been solved and the 5 periods of vibration Tn and their corresponding mode shapes, φn has been derived.                    …

1.The layout of the framing plan concerning earthquake resistance in the two horizontal directions X or Y (dots are columns, lines depict beams). Look into aspects of symmetry, redundancy and bi-directional stiffness and ductility.   1.Ans: 1.In the above picture i.e., the plan which we can see has a symmetry structure…

1. The structure is more restrained it will be more shrinking and cracking.the floor shrinkage and cracking will be more in structure A and there will be minimum cracks in structure B and C  The shear walls can also tell wheather the floor is resistant to vibration or not.It is superior to place columns at corners…

AIM: Modelling and analysing a 10 storey building as per the given structural properties. Tools required: 1.File 2.Properties 3.Structural objects 4.Groups 5.Loads 6.Mass source 7.Beam and slab properties etc... PROCEDURE: 1.Go to file and select new model. And 2.Next select grids. 3.Add number of storeys by going to the…