G. Guru Raghavendar
12 Projects
Channel flow simulation using CONVERGE CFD
AIM: To setup a 2D channel flow simulation in CONVERGE Dimensions: X=0.1m, Y=0.01m, Z=0.01m Mesh Sizes: Mesh 1- dx=2e-4m, dy=2e-4m, dz=2e-4m Mesh…
28 Jul 2020 05:25 PM IST
Flow over a backward facing step
AIM: To run stimulation for backward facing step with different mesh size and analyse the results by comapring with each other. OBJECTIVES: The backward facing step is an interesting case where the flow is subjected…
02 Aug 2020 11:13 AM IST
Project : Steady state simulation of flow over a throttle body
STEADY STATE SIMULATION OF FLOW OVER A THROTTLE BODY AIM: To simulate the steady state flow over a throttle body using converge and analyse the results when the valve is at 0° position. OBJECTIVES: …
13 Aug 2020 04:09 PM IST
Project : Transient simulation of flow over a throttle body
TRANSIENT SIMULATION OF FLOW OVER A THROTTLE BODY AIM: To simulate the transient flow over a throttle body using converge and analyse the results when the valve moves from 0° to 25° position. OBJECTIVES: A control valve is a power operated device capable of modulating the…
18 Aug 2020 02:18 PM IST
Conjugate Heat Transfer Simulation
SIMULATION OF CONJUGATE HEAT TRANSFER AIM: To simulate the conjugate heat transfer through a pipe using converge and analyse the results with three different mesh grids and three different super-cycle stage intervals. OBJECTIVES: …
04 Sep 2020 02:13 AM IST
Literature review : RANS derivation and analysis
RANS DERIVATION AND ANALYSIS AIM: Applying Reynolds’s decomposition to the NS equation and getting the Reynolds’s stress expression Understanding the term of Reynolds’s stress What is Turbulent Viscosity and differentiating from Molecular Viscosity INTRODUCTION: REYNOLD’S DECOMPOSITION…
12 Sep 2020 07:10 PM IST
Proportional Valve simulation
PROPORTIONAL VALVE SIMULATION AIM: To run the simulation for proportional valve with 3 different lifts using with and without Adaptive Mesh Refinement. OBJECTIVE: …
12 Oct 2020 03:07 PM IST
Turbo Charger Simulation Project
TURBO CHARGER SIMULATION AIM: To run the simulation process for turbo charger with three different pressure ratios. Pressure ratio- 2 Pressure ratio- 2.5 Pressure ratio- 3 OBJECTIVE: A turbocharger is a device that is used to increase the…
20 Oct 2020 07:00 AM IST
2D Cavitation simulation
SIMULATION OF 2D CAVITATION AIM: To simulate and run case setup with 3 pressure difference for Winkl Hoffer Nozzle to study cavitation Pressure difference of 30 bar Pressure difference of 70 bar Pressure difference of 100 bar OBJECTIVES: …
08 Jan 2021 04:56 PM IST
Week 5: Project : Centrifugal pump simulation
CENTRIFUGAL PUMP SIMULATION AIM: To run the simulation process for centrifugal pump for outflows of three different mass flow rate. Mass flow rate- 130 kg/s Mass flow rate- 156 kg/s Mass flow rate- 180 kg/s OBJECTIVE: Centrifugal pumps are…
05 May 2021 05:35 PM IST
Week 11: Hot Aisle Cold Aisle Containment for Data Center
HOT AISLE AND COLD AISLE CONTAINMENT AIM: To set the case setup and run the simulation of Hot Aisle and Cold Aisle Containment of Data Centre of Server Room. OBJECTIVE: We live in a computer age. We search for information on the internet.…
09 May 2021 06:14 PM IST
Week 12: Shell and Tube Heat Exchanger simulation
SHELL AND TUBE HEAT EXCHANGER SIMULATION AIM: To set the case setup and run the simulation of Shell and Tube Heat Exchanger and make a comparative study between parallel flow and counter flow. OBJECTIVE: Heat exchangers are one of the mostly…
29 May 2021 07:50 AM IST
1 Course Certificates
Here are the courses that I have enrolled
Similar Profiles
Ladder of success cannot be climbed with hands in pocket.
The Future in Motion
Give more than what you get you will get more than what you gave
Avid learner