Calculate the Concrete Mix Design for M35 grade concrete with fly ash & M50 grade concrete without Fly ash                                             …

PROJECT REQUIREMENTS: Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding…

AIM: Creating Bar Bending schedules, Different Door types, and Creation of standard drawing templates using AutoCAD INTRODUCTION: The main objective of this challenge is to understand more about the various tools in AutoCAD like creating and inserting blocks, adding parameters and assigning actions to the blocks to make…

AIM: Creating Kitchen layout, Hatching of Architectural elements, and sectional view of an Industrial Building in AutoCAD INTRODUCTION: The main objective of this challenge is to understand more about the various tools in AutoCAD like Use External References & hatch Objects. By Creating a Kitchen layout, Hatching Architectural…

1. Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Use the MV command to create the viewport of the size as shown in Figure. Also, use ATTEDIT command to edit the information in the title block. Use A1 size for the layout.…

AIM: To create various 3D Models like; Furniture, Footing, Girder, Column drop with panels, and Gable Walls in AutoCAD. USED COMMANDS: UNITS LIMITS LINE PLINE RECTANGLE OFFSET COPY MOVE SUBTRACT EXTRUDE REGION UCS BOX UNION BOUNDARY 3D ORBIT LOFT CONE MIRROR   1. Create a 3D Furniture element as shown in…

AIM:- To create a 3D Isometric view of various structural elements in AutoCAD. INTRODUCTION:- An isometric drawing is a 3d representation of a particular object. In an isometric drawing, the object appears to be viewed from above one corner with the axes being set out from this corner point. COMMANDS USED:- Units Line…

AIM:- To draw an Architectural plan for the provided plot size and develop relevant basic structural drawings A] Architectural Drawing  Plan of a residential building Elevation of a residential building Section of a residential building B] Structural Drawing  Column plan layout of the building Beam plan layout…

AIM:-  To create a 3D-rendered model of the residential building with a rendered view INTRODUCTION:- The main objective of the project is to create the plan in two dimensions, then convert it into 3D using AutoCAD 3D and rendering.  AutoCAD is highly used for deriving 2D sketches. But it is possible to create…