Question 1) Make a Simulink model of Doorbell using solenoid block.Here through the pulse generator pulses has been generated for 2sec on and 2 sec off. for that pulse period is given as 4sec and the pulse period is for 50%. The switch is used from the foundational library which has one conditionary input port and according…

Question 1) For power supply availability we kept if the system voltage is more than 230v then logic will be followed otherwise stop. For water supply, if input ==1 then follows next otherwise lamp will glow red. and next logic won't execute. Total simulation time is kept by adding all the soaking, washing, drying, rinsing…

Question 1 ) What is the difference between the mapped and dynamic models of engine, motor, and generator? How can you change the model type? Difference between the mapped and dynamic model of engine, motor and generator In the mapped model, if we have all motor-related data that we can put in a lookup table. Everything…

Question 1) Which types of power converter circuits are employed in an electric and hybrid electric vehicles? Ans :- AC to DC converter (rectifier) for charging of the battery. DC to AC converter (inverter) for battery to the induction motor. DC to DC converter (buck or boost converter) required for auxiliary vehicle elements…

Question 3) Explain in a brief about the operation of the BLDC motor. Ans:- Why BLDC motor? Advantages of BLDC motor over brushed type motor. Whether BLDC motor loaded or unloaded it runs above 10,000 rpm Less maintenance is required as there is no wear and tear of the brush. as well as it becomes then very reliable due…

Question 2) A. Why an electric motor can’t develop braking torque at a high speed similar to starting? Ans - 1. Peak torque during acceleration and peak torque during deacceleration are not equal we get some less torque while deaccelerating or breaking the vehicle. 2. Because while accelerating the vehicle, speed…

Aim    -   Part A: 1. Search and list out the total weight of various types of aircraft.  2. Is there any difference between ground speed and airspeed? 3. Why is it not recommended to use aircraft engine power to move it on the ground at the Airport?  4. How an aircraft is pushed to the runway…

Project 1  - Mini Project on Vehicle Direction Detection   Aim: To create a Simulink Data Dictionary file and a Simulink model for Vehicle Direction Detection.   General Overview of Mini Project : Identifying the direction of the vehicle is one of the important & diverse features in Autonomous driving…

Project 2:- Adaptive Cruise Control   Aim:- To create a Simulink Data Dictionary, develop an algorithm for Adaptive Cruise Control and generate a C code for it using Simulink.   Overview of ACC:-  Adaptive Cruise Control Feature for passenger cars allows the host vehicle to adapt to the speed in line with…

Q1.   For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude your observations. Ans -  This is modeled with EV_defaults_in with cargo mass 500 kg and FTP drive cycle and all other default conditions as…

Aim:- To develop one specific requirement of Traffic Jam Assistant algorithm which would predominantly feature in the Instrument Panel Cluster (IPC) algorithm.         Objective of the project:-  The model is developed in MATLAB Simulink as per Model-Based Design (MBD) guidelines. Code Generation…

Aim:-  To develop one specific requirement of Highway Assistant-Lane Changing Assistant which would predominantly feature in the ADAS.       The objective of the project:-  This model must be developed in MATLAB Simulink per MBD guidelines. Code Generation Profile must be Autosar Coder. Simulink…