1. Simulink model of Doorbell using Solenoid: Objective: To create a circuit model of an electric doorbell using solenoid with simulink. Materials or Blocks used: Pulse Generator:Block parameters: Pulse Generator attached below. The block generates pulse of amplitude 1 for a duration of 2 seconds. This signal…

1. Washing Machine Control Logic Diagram: Aim:To implement control logic of a washing machine using state flow as per the given sequence: If the power supply is available, the system gets activated. If water is not available, stop the process and indicate through LED. Soaking time should be 200s followed by washing…

                                                   BAJA-All Terrain Vehicle(ATV) Model AIM: To study the model and carry out a system-level simulation of BAJA-All Terrain Vehicle model and study the characteristics of the model and prepare a detailed technical report about the simulation of the model under different conditions.…

1. To observe the EV_defaults_in file with cargo mass of 500 kg and check if the vehicle can travel for 45 km with FTP drive cycle: ADVISOR Tool: ADVISOR, NREL's ADvanced Vehicle SimulatOR, is a set of model, data and script text files for use with Matlab and Simulink. It is designed for rapid analysis of the performance…

1. Difference between mapped and dynamic model of Engine, Motor and Generator and steps to change model type: Mapped Engine Model: The term "Mapped" model basically refers to a model with a precalculated dataset for which the ouput values are readily available for the corresponding inputs. In simple words, the mapped…

1. Power converter circuits employed in Electric and Hybrid-electric Vehicle: Power converters are electrical and electronics circuits that are used to either connect DC to AC and vice versa. In simpler words, as we know that power converters are circuits which are used to convert one level of voltage into other in…

1.A. Explanation of Matlab Demo model "Speed Control of DC Motor using H-Bridge ": In the Matlab/Simulink documentation, we can search for the simulation model of "Speed Control of a DC motor using BJT H-bridge". It is used to generate a chopped voltage and to control the speed of the DC motor. This model can be opened…

1. To Calculate the energy required for braking for a defined driving cycle: Braking is a dynamic state of a vehicle where it slows down that is, decelerates from a certain velocity. The vehicle's velocity will decrease over a certain period of time and this can occur until the vehicle reaches rest or to another velocity…

Vehicle Direction Detection: In this mini-project, we have to develop a Matlab Simulink model for Vehicle Direction Detection.  Overview: Identifying the direction of the vehicle is one of the important and diverse features in Autonomous driving and Advance Driver Assistance Features. This particular sub-feature of…

1. Table which includes materials and chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP, and LTO: Lithium-Ion cells are a secondary type, meaning that they are rechargeable and reusable, making them ideal for automotive applications and certain consumer electronics. When two or more…

1. Battery Management System: Battery Management System (BMS) is any electronic system that manages a rechargeable battery, such as by protecting the battery from operating outside its safe operating area, monitoring its state, calculating secondary data, reporting that data, controlling it's environment, authenticating…

AIM: The aim of the project is to prepare a detailed battery pack drawing along with its enclosure. The capacity of the battery pack we have to prepare battery pack drawing is of 18 kWh. The cell to be used for the battery pack is ANR26650M1-B. Introduction: As electric vehicles are increasing in the market is gradually…

1. Fuel Cell:A fuel cell can be defined as an electrochemical cell that generates electrical energy from fuel via an electrochemical reaction. Fuel cells require a continuous input of fuel and an oxidizing agent in-order to sustain the reactions that generate the electricity. Therefore, these cells can constantly generate…

1. Battery vs Ultra capacitor:The answer for the statement in the question is False. In the above scenario, it is urban driving situation where the driver have to apply break and acceleration simultaneously as per the flow of traffic. In this scenario, the driver would aggressively apply acceleration and apply breaks.…

Vehicle Model in MATLAB SIMULINK:Vehicle model is nothing but the equation of forces which comes under velocity when vehicle moves from its rest position for motorized vehicles such as automobile aircraft and watercraft. Vehicle dynamics is the study of vehicle motion.  For example, how a vehicle's forward motion…