NAVNEET KUMAR's Profile

Executive Programs

Workshops

Projects

Blogs

Careers

Student Reviews

For Business

Academic Training

Informative Articles

Find Jobs

We are Hiring!

All Courses

Choose a category

All Courses

NAVNEET KUMAR

Excellence and innovation built into every design

Skills Acquired at Skill-Lync :

MATLAB-BASICS

MBD-BASICS

SOLIDWORKS-MBD

FEA

HYPER-MESH

RADIOSS

CRASH-WORTHINESS

CFD-BASICS

Introduction

Collaborative Mechanical Engineer with 1.5 years of experience in CAE, product development and testing of the article. Considered valuable asset while contributing excellence in cross-functional project leadership to deliver products and solutions on-time within budget. Strong communicator with the ability to translate design requirements into actionable plans

6 Projects

Solid Meshing Using HyperMesh

Objective:

Link for google drive https://drive.google.com/drive/folders/1pXltUlPnywvpjebxUP5wN5gg1DZcDQwk?usp=sharing Question and Answer 1. Speed of sound in Steel Rail will be around 5188.7 mm/ms. 2. The time taken for the shockwave to travel 1000 mm is 0.192 ms. 3. Time for sound to travel the length of rail = 0.192…

10 Jan 2021 02:29 PM IST

2D Shell Meshing Using HyperMesh

Objective:

Drive link https://drive.google.com/drive/folders/1pXltUlPnywvpjebxUP5wN5gg1DZcDQwk?usp=sharing Aim The aim is to clean the geometries and extract mid surfaces and the clean the same for 2d meshing with target length 5mm, min 3.5mm, and max 7mm. Procedure 1. Clean the geometry for any free edges using…

12 Jan 2021 06:45 PM IST

Analysis and Comparison of 2D Shell Elements in a Crash Tube with and without recommended Shell formulation property in Radioss.

Objective:

OBJECTIVE Analysis and Comparison of 2D Shell Elements in a Crash Tube with and without recommended Shell formulation property in Radioss. PROCEDURE Base simulation 1.Use the crash beam file from the attached file and change the run time to 55 ms which is available in Solver Deck under Engine Keywords Tab. 2. Change…

12 Jan 2021 06:44 PM IST

Meshing of a Bumper component and performing simulation of a Crash tube with different contact interface options.

Objective:

Objective The meshing of a Bumper component and performing simulation of a Crash tube with different contact interface options. Bumper Meshing 1. Clean the geometry and make sure the component is removed from free edges, etc. Use other tools available in the quick-edit panel to clean the geometry before…

29 Jan 2021 09:46 AM IST

Frontal Crash of a NEON Dodge Model in FMVSS Regulation

Objective:

OBJECTIVE Performing Frontal crash analysis of a car PROCEDURE 1. The unit system in place is [Kg mm ms]. Open the 0000.rad file in notepad and one can observe the unit system in the starter file. 2. Open the file in the hypercrash and import the neon_front_0000.rad file. Keep the preferred unit option as…

22 Feb 2021 08:50 AM IST

Side Pole Impact Analysis of NEON Doge Model in FMVSS Regulation

Objective:

OBJECTIVE Performing Side pole crash analysis of a car PROCEDURE 1. The unit system in place is [Kg mm ms]. Open the 0000.rad file in notepad and one can observe the unit system in the starter file. 2. Open the file in the HyperWorks, select the Radioss solver and import the neon_side_reduced_0000.rad file.…

22 Feb 2021 08:49 AM IST

Showing 1 of 6 projects

2 Course Certificates