GT-POWER IC engine webinar: free, 1.6 hours
This is a February 2023 recording of a live Skill-Lync webinar, 1 hour 37 minutes long. The first half covers 1D simulation basics and an overview of GT-SUITE, then a single-cylinder diesel example is opened, run for two speeds and post-processed, and a Q&A starts at about 1:12.
20 chapters · published 26 Feb 2023 · 11,891 views as of 19 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Mechanical and automotive engineering students and early-career engineers who are new to GT-POWER and want to see how a 1D IC engine model is built, run and read.
What will you learn?
- Explain what a 1D simulation assumes and how it differs from a 3D model of the same system
- Name the GT-SUITE tools used here: GT-ISE for building and running models, GT-POST for results
- Read a single-cylinder direct injection diesel model: environment, valves, cylinder, injector and engine objects
- Describe the difference between predictive and non-predictive combustion modelling
- Set engine speed and bore as parameters in case setup and run two cases
- Compare pressure, temperature, power, torque and NOx between cases in GT-POST
What does each part of the course cover?
8 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.
- 0:0019 min · 5 chapters
Numerical simulation, governing equations and 1D versus 3D modelling
Sets out the webinar scope (GT-POWER for IC engine simulation), then explains solving mass, momentum and energy conservation equations on a computer. Compares 1D models, where the system is split into components and properties vary along one direction, with 3D models, and shows a pipe divided into sections.
- 18:319 min · 3 chapters
GT-SUITE overview and where it is applied
Introduces GT-SUITE as a 1D engine simulation tool from Gamma Technologies, with GT-ISE for building models, GT-POST for results and a SpaceClaim package for converting 3D geometry. Shows example models: a four-cylinder spark-ignition engine with catalytic converter, an electric vehicle, and marine, turbine and thermal applications.
- 27:0312 min · 4 chapters
The diesel engine model and the GT-ISE interface
Describes how engine parts map to templates, and the direct injection diesel and common rail idea. Opens the single-cylinder direct injection diesel example in GT-ISE, tours the object tree and template library, and explains the predictive versus non-predictive (fixed burn rate) approach, with this session using non-predictive.
- 38:4111 min · 2 chapters
Valve, cylinder, injector and engine objects
Goes through the inlet valve data arrays tied to crank angle, then the cylinder, a single injector using diesel fuel from the library, and the engine object where speed is set in RPM. Shows the cylinder geometry (bore, stroke, connecting rod length, compression ratio) and warns against unrealistic values.
- 49:3910 min · 2 chapters
Case setup, parameters and running the simulation
Uses the case setup with two speed cases, 3600 RPM and 4600 RPM. Turns bore into a parameter by typing it in square brackets, saves a copy because the tutorial file is read-only, and sets run options (cycles or time, parallel running). GT-POST then opens while the solver runs both cases.
- 59:476 min · 2 chapters
Post-processing in GT-POST
Checks steady-state messages (mass flow and pressure) in the solver window, then plots cylinder pressure and temperature for the two cases and combines them in one plot. Opens report tables with inputs, power, torque, air flow, volumetric efficiency and NOx in ppm, and reads the NOx jump in the second case as an undesirable design.
- 1:05:476 min · 1 chapter
Other GT-SUITE examples
Browses the bundled examples beyond engines: acoustics, aerospace including an orbital tank refuelling mission with cryogenic systems, cooling, a battery charge model, a fuel cell, pumps and compressors, and a four-cylinder engine. Closes by stating the aim was to motivate viewers to explore the tool.
Chapters
- 1:05:47Other example models in GT-SUITE
- 1:12:1125 min · 1 chapter
Live Q&A
Answers chat questions: which software is used (GT-ISE to model, GT-POST for results), the meaning of CRDI, how predicted values relate to experiments, fuel properties, hybrid electric vehicles, how GT-SUITE compares with Simulink and SolidWorks, pre-processing versus solving versus post-processing, engine knocking, and load versus speed modes.
Chapters
- 1:12:11Live Q&A
Is the Solve Problems Using GT-POWER: IC Engine Applications course really free?
Yes. All 1 h 37 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 26 Feb 2023 and had 11,891 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Solve Problems Using GT-POWER: IC Engine Applications course take to finish?
The video runs 1 h 37 min across 20 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Live Q&A" (25 min), so give it its own days.
Does the free GT-POWER course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is IC Engine Calibration using GT-POWER and GT-SUITE (free lessons), then IC Engine Calibration using GT-POWER and GT-SUITE (₹40,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Do I need a licence to use GT-POWER?
The speaker does not discuss licences or student versions. The speaker says GT-SUITE is developed by Gamma Technologies and demonstrates it using example models bundled with the software. The session ends by mentioning Skill-Lync courses for learning it. Check licence terms with Gamma Technologies directly.
Do I need to know GT-POWER before watching this webinar?
No. The speaker says that for people who are new to GT-POWER there is an introductory session first, covering numerical simulation, 1D versus 3D modelling and what GT-SUITE is. The speaker recommends beginners start from an example model, run it, and only then customise components.
Does the webinar cover predictive combustion models?
Only in explanation. The speaker describes the predictive approach, where the software decides the burn rate, and the non-predictive approach, where it is fixed. The demonstration uses non-predictive, with a fixed burn rate, and the speaker recommends running predictive analysis afterwards and comparing with experimental data.
Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course