Week - 5 - 2D meshing for Plastic components

AIM:-For the given Rear door FE model, Create and Apply different PIDs for different components and Perform suitable connections. Procedure : First we took the model from given link and download the model. Then we open model in ANSA,for fixing  graphical issue we will give inputs like below  Then we can…

AIM:For the given component, check for the geometrical errors and mesh with the given element Quality criteria. After meshing the component the thickness has to be assigned.     Procedure :  First we took the model from given link and download the model. Then we open model in ANSA,for fixing  graphical issue we will give…

Aim:- For the given Plastic Bottle Cap model, check for the geometrical errors and take the mid surface by suitable mid surfacing techniques. PID and Thickness assignment has to be done for all the mid surfaces. Mesh the same with the given element Quality criteria.      Procedure : Procedure : First…

Aim:- For the given Rear view mirror component, check for the geometrical errors and mesh the Surfaces with the given 2D element Quality criterias given below     S.No  Quality Criteria  Value  1 Target/Average length   1 2 Minimum Length  0.5 3 Maximum Length  2   Use…

Aim:- Follow the below-mentioned quality criteria, mesh the component(meshing floor panel) given below, and assign thickness       Procedure :  First we took the model from given link and download the model. Then we open model in ANSA,for fixing  graphical issue we will give inputs like below  …

Aim:- For the given CCB CAD model, Check for the Geometry cleanup , Take the mid surface, and Mesh it with the below 2D element Quality criteria.    Procedure :  First we took the model from given link and download the model. Then we open model in ANSA,for fixing  graphical issue we will give inputs like below Then open…

Aim:- For the given Hood model, Take the mid surface for all the components after checking the geometrical errors and mesh the mid surface with the given element Quality criteria.  Below Quality criteria for Meshing Procedure : First we took the model from given link and download the model. Then we open model…

Aim:-Obtain the transfer function of a mass spring damper system and use it in the model. Add a PID controller to adjust the force on mass so that its position follows a reference signal. Take m = 3.6kg ;k = 400N/m; c = 100Ns/m The reference signal is shown in the following figure.   Solution :-    Blocks…

Aim:- Read the excel file in the Matlab program and perform the interpolation in the range of -17.3:0.1:0.9. Generate the interactive plot for the interpolated data and store them in a text file and find the unknown current and  save .txt file . Solution :- xlsread :- xlsread function to read the Microsoft Excel…