Project 1 - Meshing of Floor Panel

Aim:-

Follow the below-mentioned quality criteria, mesh the component(meshing floor panel) given below, and assign thickness

Procedure :

First we took the model from given link and download the model.

Then we open model in ANSA,for fixing graphical issue we will give inputs like below

Then click on open,model in ANSA like Below

• After opening the model, One should check with the single CONS in the model. Generally single CONS will be represented by Red colour lines which shows there is no connectivity between the surfaces in the model.
• From the above image it is clear that the model is having only single CONS. Basically every CAD model while imported in ANSA, It should have double CONS (yellow lines).
• In order to get double CONS from single CONS, TOPO operation should be carried out.
• After upload the model into ANSA we give the Topo for the model.

After the TOPO

Next we can give Orient for the model to modify the orientation of a model for getting good results

Changing the distance between nodes from 20 to Target element length given Quality criteria,we can increase the cons resolution model.This will help us to undestang Shape and Geometry of a model.

Next we need measure thickness of the model

Then we start the midsurface creation.for midsurface we using offset method.

after creation of midsurface

Then we do the some geometry cleanup for better mesh and we generate the mesh by giving best in mesh generation.

Before going to mesh we are provide the mesh quality criteria

Then click on apply.then we provide mesh properties.

Then we provide mesh to model by give best mesh in meshgeneration.