Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork

Q.1 USE THE ARCHITECTURAL/STRUCTURAL PROJECT FILES DEVELOPED BY YOU IN WEEK 6 TO 8 EXPORT THE REVIT ARCHITECTURAL AND STRUCTURAL MODEL TO NAVISWORK CACHE FILE FOLLOWING THE EXPORT SETTING DISCUSSED IN CLASS

ANS

1. First open the architectural and structural file in Revit from the week 6 project
2. Then go to the file tab and select the export tab and select the nwc to export file to Navisworks and save the file in computer
3. Then again go to the Revit tab and open the structural tab and again go to the export and convert the structural drawing to nwc drawing
4. This is how we used Revit to convert the drawing into nwc drawing

Q.2 USE NAVIGATE TOOL TO WALK AROUND THE MODEL AND WALK THROUGH THE ROOM CREATED AND RECORD YOUR MOVING AS ANIMATION IN YOUR NAVISWORK FILE

ANS

1. Open the exported architect drawing in Navisworks
2. Then to create the walk around go to the inside the building
3. Then go to the viewpoint and click on the walk option
4. And walk through the model
5. To record the walk through in the drawing go to the save view option and enter the name of the walk through and select the save location

Q.3 USE NAVIGATE TOOL TO USE REALISM FEATURE TO WALK THROUGH THE MODEL AND RECORD YOUR MOVING AS ANIMATION IN NAVISWORKS FILE

ANS:

1. Open the exported architect drawing into the Navisworks
2. Then go to the realism option present on the viewpoint tab
3. Then one character appears on the screen take that character and place it inside the building
4. Then go to the walk option present on the ribbon under viewpoint and make a walk through the building
5. And record this walk through in the save view point

Q.4 EMBED BOTH ARCHITECTURAE AND STRUCTURE*NWC FILE TO YOUR NAVISWORKS FILE CREATE CLASH DETECTION TEST BETWEEN THE TWO MODEL

1. RUN THE CLASH DETECTION TEST
2. STUDY THE CLASHES BETWEEN THE TWO MODELS
3. LIST WHICH OF THE CLASHES COULD BE APPROVED
4. LIST WHICH OF THE CLASHES COULD BE NEGLECTED (WILL BE TAKEN CARE LATER)
5. LIST WHICH OF THE CLASHES CAN BE RESOLVED
6. SAVE THE RESULT AFTER COLOR CODING THE CLASHES TO THE NAVISWORKS FILE
7. IN CASE OF RESOLUTION ANNOTATE THE CLASH AND SAVE THE VIEW TO DEFINED VIEW IN NAVISWORKS

ANS:

1. Open the architectural and structural exported drawing from the week 6 in the Navisworks
2. Then go to the home tab and select he clash detective in ribbon a
3. Then dialogue box will open then select there add the text
4. Then select the architectural and structural drawing and the
5. And run the test and see the clashes and review it

Q.5 USING THE TIMELINER FEATURE IN NAVISWORKS PREPARE A SCHEDULE FOR THE PROJECT DEVELOPED IN WEEK 6 TO 8 BY ADDING REASONABLE ASSUMPTION FOR TASK START DATE AND END DATE AND SIMULATE THE TASK COMPLETION AS A VISUAL SIMULATION RECORD IT AND SAVE THE TIMELINE SIMULATION TO NAVISWORKS FILE

ANS:

1. Open the architectural drawing into the Navisworks then
2. To create the schedule, go to the timeline under the home tab ribbon
3. Then add the task under the tab
4. Then add the task name to performed
5. And then add the plan start date, planned end date and actual start date and actual end date
6. And put every activity and dates