Underbody Coating

Core and Cavity Design for Switch Bezel - Plastic Component Mold  This report demonstrates the design of Core and Cavity Bloacks for an Automotive Plastic Component – Door Switch Bezel using industry principles such as Parting Surface and Parting Line definition, Draft angles, Draft Analysis, Determining and…

Coin Holder Design:-   Draft Angle:- Tooling must be cleared for easy ejection of the component, from the core cavity. In order to clear tooling certain value of draft is given to the component. Minimum of 2-3deg is provides on all plastic components. Minimum draft angle for the for all engineering features is 0.5 Degree…

 Part:-       Dog House:-                        Dog house is an engineering feature used in plastic trim design. Dog houses are used as supporting feature. Sometimes other engineering features like snaps; locators etc. are mounded on them to increase their strength. Dog houses are subjected to draft analysis to prevent…

Part:-               Draft Analysis:-                                                            The draft analysis technique is used to…

Bumper:-   Report:-   Draft Analysis:-                                                            The draft analysis technique is used to analyze whether our part…

Object:-  Design of A pillar Design with Master Section   Class A Surface:-                           The Class-A modelling process typically starts with a fully developed design, either as a scanned clay model or an Alias model. Because the…

Object:- Design of Door Trim Lower with Engineering Features   Engineering Features:- Heat Stake:-                      Heat staking also known as thermoplastic staking is the process of joining two dissimilar materials together. In heat staking we use…

 Part 1st:-

Part 1st:-

Part 1st:- Part 2nd:- Part 3rd:- Part 4rth:- Part 5nd:-   Assembly:-   Drafting 1st:- Drafting 2nd:- Drafting 3rd:- Drafting 4rth:- Drafting 5th:-      

TITLE: SECTION MODULUS CALCULATION AND OPTIMIZATION OBJECTIVE:  To calculate the section modulus for a previously designed hood. To make improvements in this hood so that section modulus will be improved. EXPLANATION: Section modulus is a geometric property for  a given cross section used in the design of beams or flexural…

Objective: Calculating Wheel Arch area and Find out whether the car will pass the standards or Not. Explanation: When vehicle is moving tire pick up stones and others and hurt them in all direction. Fenders are basically present to prevent any injuries to pedestrians and constrain the motion of these particles.  …

TITLE: TO DESIGN AND DEVELOP THE BACK DOOR OF THE CAR ALONG WITH ESSENTIAL REINFORCEMENT BY USING APPROPRIATE DESIGN METHODOLOGIES. OBJECTIVE: The objective of this project is to design Car back door with reinforcement like a latch-and-striker hinge, Gas stay, and viper motor reinforcements. Learning the industrial approach…

TITLE: To design and develop the roof of a car along with essential flanges and reinforcement by following the master section and design parameters.  OBJECTIVE:   The objective of this project is to design a car roof with essential flanges and reinforcements like ditch area, front roof rail, bow…

Underbody Coating: What is underbody coating?  The coating is the formulation of spray that is applied to the chassis protecting it from rusting from the external environment to ensure the integrity and safety of the car.   The use of underbody coating plays a very important role in the service life of the vehicle.…

Benchmarking: What is Benchmarking? Benchmarking is a process of measuring the performance of a company’s products, services, or processes against those of another business considered to be the best in the industry, aka “best in class.” The point of benchmarking is to identify internal opportunities for…

TITLE: DESIGNING FRONT FENDER USING SIEMENS NX. OBJECTIVE: To design the vehicle's front hood. Learning the industrial approach of how vehicle BIW parts are designed and manufactured. To be industry ready for the role of Mechanical Design Engineer. Master section of a drip area:-       INTRODUCTION: when…

TITLE: DESIGN AND ASSEMBLY OF VEHICLE HOOD. OBJECTIVES: To design and assemble the vehicle hood. Learning the industrial approach of how vehicle's sheet metal parts are designed in the industry. To be industry ready for the role of Mechanical Design Engineer. INTRODUCTION: The Hood is used as an engine cover for motor…

 1. Radar Mast         Report:-   TITLE: Design, assembly, and rendering of sunseeker predator 108 Yacht. OBJECTIVES: To design, assemble and render the Sunseeker predator 108 Yacht. To learn the designing complex surfaces in Solidworks. To learn the Solidworks software as a design…

TITLE: DESIGN, ASSEMBLY, AND RENDERING OF AMERICAN CHOPPER BIKE. OBJECTIVES: To ideate, design, assemble and render the American chopper bike. To learn the SOLIDWORKS software as a design tool in an industrial manner. To be industry ready for the role of Mechanical Design Engineer.   INTRODUCTION: In this…