Underbody Coating

Underbody coating is the coating provided on bottom surface of Vehicle which helps to prevent corrosion. Manufacturers provide thick paints and sealants at the under of car to prevent corrosion.

A rubber or wax-based composite is sprayed onto the entire underbody of the vehicle, it also reaches the area where it is hard to reach and where the moisture and dirt stuck the most. This area is the main weak point where it leads to corrosion and spread to the other areas. Whenever the corrosion starts from an area it is difficult to retain the strength of the area, under body coating will prevent this from happening, therefore under body coating is important.

Process

1. The Underbody of the vehicle is washed and cleared from dust .
2. Then underbody is let to dry for some time
3. Lift the car and remove wheels to prevent over spary
4. Tape of any electrical areas and the areas like exhaust.
5. Remove the rust if any
6. Apply 2 coat of Rust primer for oxidized surface (less viscous than under coating)
7. After drying apply underbody coating
8. Dry and remove the tape.

Approximate cost

HATCH BACK RS 1700

SEDAN RS 2100

SUV RS 3500

MPV RS 3500

BUS/HEAVY TRUCK RS 12000