Underbody Coating

Draft analysis- The Draft analysis is performed based on color ranges identifying zones on the analyzed element where the deviation from the draft direction at any point, corresponds to specified values. Here I am taking the draft angle 0 to 2.6 degree.For performing the draft analysis we need to create a Tooling axis…

Draft analysis- The Draft analysis is performed based on color ranges identifying zones on the analyzed element where the deviation from the draft direction at any point, corresponds to specified values. Here I am taking the draft angle 0 to 3 degree.For performing the draft analysis we need to create a Tooling axis and…

Draft analysis- The Draft analysis is performed based on color ranges identifying zones on the analyzed element where the deviation from the draft direction at any point, corresponds to specified values. Here I am taking the draft angle 0 to 3 degree. For performing the draft analysis we need to create a Tooling axis…

Aim : To design a CAD model of american chopper in order to assemble and render in solidworks. Objective:  To develop principles and skills to design any product To get a good understanding of various features such as project curves,blocks, sketch pattern etc. Software used :    Solidworks : Currently to…

  Objectives:   To understand the Design parameters of the backdoor. To design the backdoor inner panel, outer panel upper and lower To add all the necessary reinforcement and embossed/cut-outs to the inner door panel. To perform draft analysis of the inner panel along the tooling direction for manufacturability.…

Challenge:   In the given  challenge module of roof styling is to develop the essential flanges with reinforcements and embossed surface to strengthen the rails   Do a curvature study on the roof.. Calculations to determine the position of the bow-roof.   Roof is the structure above the head…

  Introduction :    In each car there are various parts that are assembled to form a complete structure. Every part is assigned with different functions. Here I have design Front fender and its mounting. Front fender is located just above the front wheel.                                                                …

Section Modulus   It is defined as the ratio of the moment resisted by the section to the stress in the extreme fibre. It gives an idea that most of the work in bending is being done by the extreme fibres of the beam,i.e. the top and bottom fibres of the section. The distance of the fibres from top to bottom is therefore…

Objective : To design a hood inner panel and outer panel.    Data to be used: Hood Thickness Information Outer Panel Thickness = 0.75mm Inner Panel Thickness = 0.75mm Reinforcement Thickness = 1.5mm   Pedestrian Safety :     Earlier in October 2018, the Government of India regulated all new…

  Underbody Coating : It is dense cladding which is applied  to prevent small stones that hit the underbody while travelling then the paint starts to chip and the corrosion begins.It is generally being applied once the ED spray is done it is usually spray or painted either by robotic arm or manually on the chassis,it…

Tata nexon : Tata nexon is built and designed by tata motors first launch in 2017 and it got its facelift in 2019. Tata Nexon offers 1.2 litres turbocharged petrol engine and 1.5 litre diesel engine in the transmission; it has 6 speed manual gearbox and offers an automatic transmission too. Tata Nexon price starts at ₹…

Tittle : To design and modelled Box assembly using siemens NX-CAD   Objective :                            1.) To understand the concept behind design                         2.)…

Tittle : To design and modelled Bracket using siemens NX-CAD   Objective :                            1.) To understand the concept behind design                         2.)…

Tittle : To design and modelled odd shape enclosures using siemens NX-CAD   Objective :                            1.) To understand the concept behind design                         2.)…

Tittle : To design and modelled Box assembly using siemens NX-CAD   Objective :                            1.) To understand the concept behind design                         2.) To get familiar with NX-CAD sheet metal workbench   Introduction :      Sheet Metal : It is a comprehensive cold working process for sheet metal…

Tittle : To design a casing using NX-CAD sheet metal    Objective :                            1.) To understand the concept behind design                         2.)…

Aim : To model a Yacht in order to assemble and render in solidworks visualize.   Objective:  To develop principles and skills to design any product To get a good understanding of various features such as project curves,blocks, sketch patterns etc. To understand use of decals and and make use of it in model …