Preparing Schedule & Cost Estimation for a building using REVIT

Aim:  To Model one multi storeyed twisting tower with maximum architectural features. Twisting tower: Procedure: Step 1: 1) Open a new revit file and click dynamo from manage tab 2) Insert the code of circle and code block  Step 2: 1) check the circle in revit Step 3: 1) Draw the model lines around the circle in revit…

AIM   To create a 3 dimensional model of the residential building with a rendered view.   Procedure Open autocad and set the limits  Input line circle, trim.rectangle etc., Create a 3D model building with 3D inputs. save the file with appropriate rendered file and save as residential building with rendered…

AIM To design and Draft a layout of a residential building.   Procedure Open autocad and set the limits  Input the commands such as line trim circle rectangle etc., Apply layers for the elements in the building. save the file with appropriate file name.   Results          

1. AIM To create a 3D Isometric View of the building with plan and elevation given.   2. Aim- To create the 3D View of the Building Façade as given in the plan and elevation. Also, see the detail of the window.         3. Aim - To create the ismoteric 3d view of a stair with railing as shown in the plan and elevation.…

1.AIM To create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing. Procedure 1.Open autocad and set the limits 2.Input the commands such as line trim,fillet, circle, rectangle etc., 3.Create the 3d furniture element.   2.AIM Create the 3d Model of an Isolated footing as shown in Figure.…

1. AIM To create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Procedure 1.Open autocad and set limits. 2.Input all the commands like line,fillet,circle,rectangle etc., 3.Complete the layout as per the gibven figure.   Results…

1. AIM To create the layouts of the Kitchen and provide hatches pattern.   Procedure Open autocad and set the limits  Draw the kitchen with the line fillet trim rectangle etc., commands. save the file   2. AIM To create the elevation of the plan created in the Challenges 7 and apply proper hatch in the walls,…

1.AIM To create the templates as shown in Figures by taking the size of the title block as per industry standards or you can assume it as per the size of the paper.   PRocedure Open autocad and set the limits. With the autocad commands like line trim fillet circle etc., Create the titleblock with the figure and save…

  Aim To create a column schedule    Procedure 1.Open autocad and set the limits with units  2.provide tabular column with the line command and insert text 3.apply different sketches in the layout. 4.Apply filters and layers on the layout.   Results The inputs are produced with the below output…

  AIM To Create the Plan and Sections Procedure 1.Open autocad and set the limits  2.Input line,trim,fillet,circle,rectangle and provide dimensions for the layout as shown in the figure. 3.finally take snapshot of the drawings.   Results The drawing created was taken snapshot and produced in the results…

Aim To draw the elevation and details of a wardrobe.   Procedure Draw the layout with the commands in the autocad like line,trim.fillet, hatches in order to complete the layout.   Results Thus the results are produced from the autocad.   2. AIm  To draw the floor plan with the autocad as shown  …

Aim   To draft various geometries using Chamfer, Fillet tool in AutoCad.   Procedure 1.Open autocad and set the units according to the layout and geometries. 2.Input all the commands like line fillet, arc, rectangle and complete al the geometries.   Results the following are the results of the autocad…

  Aim To sketch the layout of a residence as shown in the Figure 1.    Procedure 1.Open autocad and set the units according to the layout requirements. 2.Input the commands like line circle, rectangle, fillet, trim etc., to complete the given layout. 3.Mark all the dimensions and place the text with respect…

AIM -To  create the given geometries       

Aim-To draw the attached drawings. Procedure Open autocad and draw each and every drawings in the attachment with the given measurements. Results the results are atatched below.

    AIM To Model an apartment with 4 units on each floor (2- 3 BHK) of 7 storeys with stilt parking facility. Design and model the structural elements as required.     Procedure Create schedules from the view tab and estimate the building with different trades. Results with snaps      …

1) AIM- To create a set of sinusoidal points and create a curve and create a surface out of the curve.   2) AIM- To Create a conceptual layout of in dynamo .   3) Aim- To create an array of model elements in Revit. Use dynamo to vary the properties of model elements by using the slider or code block…

1) AIm-To use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file Procedure- Go to file tab and export the revit file model into navisworks by NWC. Results   2) AIM-To use Navigate Tool to walk around the model and walk…

1) *Set of standards that are unifrom and constant for all structures. *It ensures the construction safety. *It enhances modern construction method *Provides building standards.   2) AIM- To list the groups that will be essential to you when you begin modeling in Autodesk Revit from the National Building Code.  …

1) AIM-Hvac systems and its essentials in modeling of buildings. a.Heating ventilation and air conditioning b.It is a technology of indoor environmental comfort.Its goal is to prrovide indoor thermal comfort and acceptable indoor air quality. c.Important part of structure.   Essentials in building modeling Control…

1) a)Using 3D model created a section box 1.   b) To create similar doors and windows in a floor plan layout Results c) To reduce the thickness of lines visible in plan views Results   d) To apply override settings to a floor in the model section view Results e) To increase the range of visibility in a plan view…

1)  The type of structure which I want to build is residential building.   2)   open space has to be 4.5m minimum. FAR has to be 2.14 with the minimum area of 40x30m and the road abutting ha sto be 9m.   3. AIm -to model the components in the model.   procedure- create all the model elments with…

1) AIm- To set project base point and project shared coordinates for the project   Results 2) Aim- To copy project coordinate and its parameters from arch to str model.   3) Aim- To create central model Procedure- Create worksets from the collaborate tab to enable the worksharing of the model and its elements…

1) Aim - to create ceiling from arch tab Procedure- Create a ceiling above the ground floor at specific height with picking ceiling -sketch ceiling method. Results   2) Aim- To model a roof above the ceiling by selecting the footprints of the ceiling. Procedure- Modelled a roof with the ceiling footprint with 10degree…

1) Aim- Align the floor plan with grids of the layout with floor component from architectural tab. Procedure Step1.Floor creation from Arch tab  step2. Applying thickness and material from edit type paramters tab step 3. alligning th layout with the grids in floor plan. Results-   2) Aim- To create a wall and…

1) Building Information Modeling (BIM) is the foundation of digital transformation in the architecture, engineering, and construction (AEC) industry. Its main features are Intuitive interface. Customizable templates. Multiple board views. Project scheduling. Real-time collaboration. Resource management. Automations. Mobile…

1)   2) 3)   4)   5) 6)         7) 8)     9)     10) 11)   Analyze toolbar is used for analysis of the structural members with imposing loads and analysis and to provide the spaces and zones in MEP zones of the model.It will be used to produce reports schedules…