Understanding the utility of Projected curves feature and Revolved cut feature in Solidworks

1.What is design Methodology? Design methodologies are the steps that are followed during the concept designing stage of the fixture. Purchase Order(PO) The purchase order (PO) is the official document received from the customer. which commits the customer to pay the seller for the sale of a specific product to be delivered…

 A fixture is a work-holding or support device used in the manufacturing industry.Fixtures are used to securely locate (position in a specific location or orientation) and support the work, ensuring that all parts produced using the fixture will maintain conformity and interchangeability. Using a fixture improves…

Bill of Materials (BOM)A bill of materials (also known as a BOM or bill of material) is a comprehensive list of parts, items, assemblies and other materials required to create a product, as well as instructions required for gathering and using the required materials. The bill of materials can be understood as the recipe…

Clamping unit 1   Clamping unit 2   Swivel clamp unit 1   Swivel clamp unit 2   Retractable Pin unit   Pin unit  

Key Sheet for the Complete Fixture assembly in orthogonal projections   Key Sheet for the Complete Fixture assembly in isometric view   BIW Fixture base unit design in isometric view   BIW Fixture base unit design in orthographic projection   Base plate design in isometric view   Base…

 What are the Drawing templates? Drawing templates are the files of frames and title block which convey the design information that are used to generate 2 D drawing from 3 D part. Neat and detailed Drawing templates convey more information from designer to manufacturer. so we can avoid misunderstanding and…

3D finish is the process where design is being completely finish & to be ready for final simulation & 2D detailing Following points are taken into consideration while finishing the design:- Hole concentricity & hole sizes- All parts Hole concentricity is checked & confirmed while finishing the parts. Machining…

What do you understand by the 3D finish process? While finishing the design the nominality of holes is checked which ensures the easy assembly of all the units. The hole concentricity & holes sizes are checked which ensures the easy assembly of different parts. The gaps between the different units are checked to ensure…

Base Unit Design Challenges 2 A base unit is the unit designed to mount all other units (Clamp unit, pin unit, rest unit etc) of the tool, also other parts necessary for a tool like pneumatic valve box, trunking cable path will also be mounted on to a base unit. Base unit is the fundamental component of the fixture because…

What is the Base Unit? What are the typical parts of the Base Unit? A base unit is the unit designed to mount all the other units(Clamp unit, Pin unit, rest unit etc.) of the tool, also other parts necessary for a tool like pneumatic valve box, trunking cable path will also…

Clamp Unit & Pin-Clamp Unit Design Challenge Swivel Clamp unit is unit designed to clamp, hold the car panel by using a pneumatic clamp cylinder. In this type There is pivot pin around which clamp arm rotate along with swivel cylinder.   DESIGN Clamp 1   Clamp 2   Clamp 3   All clamping units  …

Clamp unit and Rest unit is designed and report is attached in the ZIP file 

CAT product file and the report PPT is uploaded in the ZIP file given below

 1. What is the process of project execution activity? Performing the activitiesneeded to meet the project Obtaining and manage quotations, bids and proposals as needed. Managing the projectteam and manage other resources. Collecting and analyse performance data. Generating projectdata for status…

What is BIW & define its parts? Body in white (BIW) refers to the stage in the automobile manufacturing in which a car body's components have been joined together, using one or a combination of different techniques: welding (spot, MIG/MAG), riveting, clinching, bonding, laser brazing etc. BIW is termed before painting…

Car Door assembly please refer to the PPT and CAT part given below  

ive uploaded the zip file including the CAT parts and PPT

 ive uploaded the zip file including the CAT parts and PPT

 ive uploaded the zip file including the CAT parts and PPT

CAT part, Drawing and Pdf are attached in the ZIP file 

i have done the model and uploaded in the zip file along with the ppt 

Hood  The hood (North American English) or bonnet (Commonwealth English excluding Canada) is the hinged cover over the engine of motor vehicles that allows access to the engine compartment, or trunk (boot in Commonwealth English) on rear-engine and some mid-engine vehicles) for maintenance and repair.  On front-engine…

Roof  An automobile roof or car top is the portion of an automobile that sits above the passenger compartment, protecting the vehicle occupants from sun, wind, rain, and other external elements. In order to give strength, it is provided with embosses on top of the roof.   The bow roofs are provided with mastic…

Sectional Modulus Main purpose of this analysis was to get the inertia of the hood and study of sectional modulus and improve it to withstand more load. It gives the idea of how much the material is resistant to bend/ deformation.  It is the ratio of moment of inertia and distance between the neutral axis and extreme…

Wheel arc Radius Objective To find whether the given model satisfy the standards of wheel arc radius or not Fender Its primary purpose is to prevent sand, mud, rocks, liquids, and other road spray from being thrown into the air by the rotating tire. Fenders are typically rigid and can be damaged by contact with the road…

Underbody coating provides long term protection from corrosion to car\'s underbody. It also protects parts like internal body panels, frame rails and other inner cavities that are not physically accessible but are prone to corrosion. In Indian road conditions, a cars underbody is most prone to corrosion. Underbody…

Benchmarking   Hyundai Venue The Hyundai Venue has 1 Diesel Engine and 2 Petrol Engine on offer. The Diesel engine is 1493 cc while the Petrol engine is 1197 cc and 998 cc. It is available with the Manual and Automatic transmission. Depending upon the variant and fuel type the Venue has a mileage of 17.52 to 23.7…

Sheetmetal Bracket II   OBJECTIVE To design a Bracket using NX sheet metal application as shown in the above figure.   INTRODUCTION The Bracket structure design is obtained using sheet metal application in NX12 application. Various features such as flange, tab, dimple is used while creating the above model.  …

Learn to use Surface knit ,Surface loft ,Cut sweep options to model Gas tank. assembled american chopper by understanding Concentric mate ,Coincident mate,Distance mate ,Angle mate and Parallel mate.   check the zip file for all the parts and assembly thankyou..

designed chassis and engine in solidworks 2020

Neutral Data Files A Neutral file is a formatted text file containing information about parts and assemblies created in Creo. The Creo application formats part geometry data so that other software systems can easily read it and a wide variety of applications can use it. You can create neutral files from…

American Chopper   AIM AND OBJECTIVE To model and assemble various parts of American Chopper using solid works.   PARTS TO BE MODELED Transmission belt Kick Stand Front Fender Rear Fender Oil Tank Chain Pedal Front wheel Rear wheel Front fork Chassis Engine Gas tank   COMANDS USED TO CREATE YATCH  …

modeled rear wheel and front fork using solidworks ive attached the files please go through it.

Odd Enclosures    OBJECTIVE To design an odd enclosure using NX sheet metal application as shown in the above figure.   INTRODUCTION The odd enclosure structure design is obtained using sheet metal application in NX12 application. Various features such as flange, tab, dimple is used while creating the above…

Bracket   OBJECTIVE To design a Bracket using NX sheet metal application as shown in the above figure.   INTRODUCTION The Bracket structure design is obtained using sheet metal application in NX12 application. Various features such as flange, tab, dimple is used while creating the above model.   METHODOLGY…

BOX ASSEMBLY   OBJECTIVE To design a box using NX sheet metal application as shown in the above figure.   INTRODUCTION The sheet box structure design is obtained using sheet metal application in NX12 application. Various features such as flange, tab, dimple is used while creating the above model.   METHODOLGY…

PREDATOR YACHT     AIM AND OBJECTIVE: To model and assemble various parts of predator yacht using solid works.   PARTS TO BE MODELED: Propeller Radar Hull Garage door Rear seat Front seat Middle seat Super structure COMANDS USED TO CREATE YATCH: SKETCH: Sketch is basically a 2d representation of particular…

Casing Design   OBJECTIVE To design a casing using NX sheet metal application as shown in the above figure.   INTRODUCTION The sheet casing structure design is obtained using sheet metal application in NX12 application. Various features such as flange, tab, dimple is used while creating the above model.  …

Metal bracket reformed OBJECTIVE To design a Bracket using NX sheet metal application as shown in the above figure.   INTRODUCTION The Bracket structure design is obtained using sheet metal application in NX12 application. Various features such as flange, tab, dimple is used while creating the above model.  …