For the draft analysis process first, make the the X clearing axis and Y clearing axis and then make the bisecting line to make clearing axis and make the draft analysis with 3-degree clearance.

 BASE BRACKET AIM :- Create Base Bracket plastic component through the given Class-A surface.And perform the draft analysis on the model Tooling Axis:- The tooling axis is defined as the direction in which the mould opens or core and cavity open and closes.The selection of correct tooling axis is important to ensure…

THEORY: Draft Analysis:- Draft analysis helps to detect if your drafted part is easily removable from the mold(in case of plastic component).All plastic components will have a minimum draft of 0.5 to 3 deg.If a mold wall is perpendicular to the part ejection ,there will be ample friction or interference between the mold…

A class-A surface from a vehicle door is provided to me to design a part model and validate it.     For this door armrest as a Class -'A' surface, first I need to check whether the surface has some boundary irregularities and any open boundaries. After checking I need to create a tooling axis for the class-'A' surface.…

 A class-A surface hase been provided to me for designing a full solid body out of a surface and validate it. In given surface first I need to check any open boundaries that may create errors while designing. After checking I need to create a tooling axis for the class-A surface. Then I need to create class-B and…

Draft Analysis:- Draft analysis helps to detect if your drafted part is easily removable from the mold(in case of plastic component).All plastic components will have a minimum draft of 0.5 to 3 deg.If a mold wall is perpendicular to the part ejection ,there will be ample friction or interference between the mold and the…

Tooling axis creation The tooling axis is important for removing the material when finished. First,I will creating the point on base surface respectively also extract the surface of the component as shown in image. I will create an axis system, from that axis I will get two cross-sections by using that cross sections lines…

AIM: Create the boss and Dog House for the Centre console coin holder considering the design rules OBJECTIVES: Create Class B and C surfaces through Class A surface. Create tooling axis using bisecting method. Perform draft analysis. Create screw boss and dog house considering the design rules. THEORY: Draft Analysis:…