Calculate the Concrete Mix Design for M35 grade concrete with fly ash  AIM : To calculate the mix design for M35 grade concrete with fly ash  INTRODUCTION : Concrete mix design may be defined as the art of selecting suitable ingredients of concrete and determining their relative proportion with the object of…

  AIM:To sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings.   Procedure:     Vastu Shastra principle:- The main door is faced towards the east or North which gives archway to victory and progress in life". The living room is placed in…

AIM: To create the geometries from P1 to P2 using all the coordinate system methods , to use the line tool and circle to create the geometrics. PROCEDURE: To draw line simple lines or series of line segment by one way of the following 1. Commond line: Line or L 2. Menu bar : Draw - Line 3. Draw bar 4. Tool palettes : Draw-Line…

AIM- Creating Bar Bending schedule, different Door types , and creation of standard drawing templates using Autocad. INTRODUCTION- The main objective of this study is know more about the advanced tools in AutoCad by drafting different kinds of drawings given.   Q.1 Create the templates as shown in Figures. Take…

AIM - Creation of Multiple Viewports, scaling the drawing and setting in template in Autocad. INTRODUCTION - The layout of the plan , sections , view with templates are created using various tools in Autocad.   Q1- Create a layout of the Plan and Section A of the project in Challenges 7, using the template…

  AIM - Creating kitchen layout , Hatching of Architectural elements and sectional view of an industrial building in Autocad. INTRODUCTION - In this study we get know about the hatching tools in autocad and  other tools in Autocad. Q1.Create the layouts of the Kitchen and provide hatches pattern as shown. Also,…

AIM: Creating various 3D Models like furniture, Footing , Girder , Column drop with panel and gable wall in Autocad. Q1.Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing.   PROCEDURE: Set the drawing units to Engineering units Set the lower limit and upper limit as per the drawing…

AIM: Creating a 3D rendered model for a residential building in Autocad  INTRODUCTION - The 3D rendered model for an Residential building is created by using various Autocad tools By creating an 2D model in Autocad 2D  PROCEDURE -  STEP 1 : Draw the plan using Autocad 2D Under Drawing units, select Architectural…

AIM - Creating 3D Isometric view of various structural elements in Autocad  1.  Create a 3D Isometric View of the building with plan and elevation given.   PROCEDURE- Under Drawing units , select Engineering Units  Now the lower limit is set to 0',0' and the upper limit to 50',50' Type Z enter…

AIM- Design and Draft a layout of a residential building with the following details: a. Plot size: 60'x20' b. Orientation - East facing c. Develop the following  i. Architectural Drawing( Floor plan , Elevation , Sections)  ii. Structural Drawing( Column , Beam ,and footing layout)   PROCEDURE - All the…