Aim: Create the simulation to ring a bell for 2 sec and go to the off position for another 2 sec in a repeated manner using a solenoid valve. Description: To simulate the above condition we require the following Blocks: Pulse Generator Battery switch Electrical Reference solver configuration solenoid  Ideal Translational…

Implement control logic of a “washing machine” using Stateflow as per the given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s. Then…

Aim: Study and Analyse the Baja All-Terrain Vehicle(ATV) Model using Simulink. Objective: To prepare a technical report of ATV model with Dashboard,signalBuilder, with workspace model, and with a Lookup table. Analyze the ATV model without Dashboard Analyze the ATV model with Dashboard Analyze the ATV model with CVT Ratio…

Overview of the Project: Here the main objective of the project is to do the mathematical set operation. The set operation has many operations here they are told to do the union and intersection of the list created as a linked list. so here we are creating a structure it has a collection of different data. Here is the…

In this project, controlling the retraction and extension of Airplane’s landing gear can be implemented using Finite State Machine (FSM). FSM is the most efficient algorithm which is mathematical model of computation. Objective: Here we are going to control the Airplanes landing gear. What is Finite state Machine:…

Aim: Implement a system on the simulator for controlling a DC motor using the L293 motor driver, monitor its status, and print the running status of the motor on the LCD Display. code: #define F_CPU 16000000L #include <avr/io.h> #include <avr/interrupt.h> #include <util/delay.h> #define spcn PD2//declaring…

In this project, the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (HC-SR04) Description: Ultrasonic Module HC-SR04 works on the principle of SONAR and RADAR systems. HC-SR-04 module has an ultrasonic transmitter, receiver, and control circuit on a single board. The…

Interfacing a 16*2 LCD with Arduino using I2C protocol COde: Master Code: #include<Wire.h>//getting the wire I2C communication protocol #include<LiquidCrystal.h>//getting the liquidcrystal library files LiquidCrystal lcd(2,7,8,9,10,11);//(RS,EN,8,9,10,11) void setup() { lcd.begin(16,2); // lcd.setCursor(0,0);…

Measuring the distance of an object using an ultrasonic sensor and also smoothening the sensor data using a moving average filter Code: Master Code #include// we are getting the I2C protocol const int pin =7;//seting pin 7 as signal pin long sum =0;//declaring all the global variable long avg; byte send; void setup() {…

Test Plan to test features of a new mobile phone: Overview: A Test Plan is a document that describes the scope of testing, test strategy, objective, effort, schedule, and resources required. It serves as a guide to testing throughout the development process. 2.1 Unit testing Objective The main objective of unit testing…